Abstract:Ventilated cavitating flows are investigated via direct numerical simulations, using a coupled level set and volume of fluid method to capture the interface between the air and water phases. A ventilated disk cavitator is used to create the cavity and is modelled by a sharp-interface immersed boundary method. The simulation data provide a comprehensive description of the two-phase flow and the air leakage and vortex shedding processes in the cavitating flow. The mean velocity of the air phase suggests the existence of three characteristic flow structures, namely the shear layer (SL), recirculating area (RA) and jet layer (JL). The turbulent kinetic energy (TKE) is concentrated in the JL in the closure region, and streamwise turbulent fluctuations dominate transverse fluctuations in both SL and JL. Budget analyses of the TKE show that the production term causes the TKE to increase in the SL due to the high velocity gradients, and decrease in the JL due to streamwise stretching effects. Air leakage and vortex shedding occur periodically in the closure region, and the one-to-one correspondence between these two processes is confirmed by the velocity and volume fluid spectra results, and the autocorrelation function of the air volume fraction. Moreover, the coherent flow structures are analysed using the spectral proper orthogonal decomposition method. We identify several fine coherent structures, including $SL_{KH}$ induced by the Kelvin–Helmholtz instability, $SL_{out}$ associated with large-scale vortex shedding, $SL_{in}$ associated with small-scale vortex shedding, and $SL_{r}$ associated with upstream turbulent convection. The present study complements previous research by providing detailed descriptions of the turbulent motions associated with the violent mixing of air and water, and the complex interactions between different characteristic structures in cavitating flows.

Numerical Study of the Cavitating Flow Through a Venturi Section by Means of OpenFOAM and Gmsh Tool

Numerical Study of Flow Behavior in a Cavitation Tunnel Using RANS with Scale-Adaptive Simulation (SAS) Turbulence Model in an OpenFOAM Framework

Scale Adaptive Simulation of Unsteady Cavitation Flow Around a Plane Convex Hydrofoil with a Semi-Cylindrical Obstacle

Numerical Investigation of Unsteady Cavitation Around a NACA 66 Hydrofoil Using OpenFOAM

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

Numerical Simulation of the Micro-Jet Velocity and Cavitation-Erosion on an Axisymmetric Nozzle

Numerical Study of Unsteady Cavitation on 2D NACA0015 Hydrofoil Using Free/open Source Software

Numerical Simulation of the Cavitation Micro–jet Velocity and Erosion on a Plane–convex Hydrofoil with Semicylindrical Obstacle

Study of Partial Cavitation on a Plane-Convex Hydrofoil with Mesh Development by Using GMSH Free Software

Numerical Study of Cavitation on Hydrofoils

Numerical Simulations of Propeller Cavitation Flows Based on OpenFOAM

Numerical Simulation of Ventilated Cavitating Flow Based on Cavitation Model Solving Transport Equations

A Numerical Method for Simulation of Attached Cavitation Flows

Simulation-based Study of Low-Reynolds-number Flow Around a Ventilated Cavity

Numerical Study of Unsteady Cavitating Turbulent Flow in A Tubular Turbine Runner

Scale-Adaptive Simulation Of Unsteady Cavitation Around A Naca66 Hydrofoil

Numerical simulation of pipeline ultrasonic cavitation based on CFD

Modelling and Computation of Unsteady Turbulent Cavitation Flows

Numerical Investigation on the Hydrodynamic Performance with Special Emphasis on the Cavitation Intensity Detection in a Venturi Cavitator

Numerical simulation of cavitating turbulent flow in a high head Francis turbine at part load operation with OpenFOAM

Numerical Analyses of Ventilated Cavitation over a 2-D NACA0015 Hydrofoil Using Two Turbulence Modeling Methods