Graphitic Carbon Nitride (G-C3n4)-based Membranes for Advanced Separation

Yang Wang,Baoyu Gao,Qinyan Yue,Zhining Wang

DOI: https://doi.org/10.1039/d0ta06729f

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Graphitic carbon nitride (g-C3N4), which is composed of replicate tri-s-triazine units, has received tremendous attention in the area of membrane-based technologies.

What problem does this paper attempt to address?

Two-dimensional Graphitic Carbon Nitride for Membrane Separation

Tao Zheng,Xiuyang Zou,Meisheng Li,Shouyong Zhou,Yijiang Zhao,Zhaoxiang Zhong

DOI: https://doi.org/10.1016/j.cjche.2021.01.011

IF: 3.8

2022-01-01

Chinese Journal of Chemical Engineering

Abstract:Recent years, membrane separation technology has attracted significant research attention because of the efficient and environmentally friendly operation. The selection of suitable materials to improve the membrane selectivity, permeability and other properties has become a topic of vital research relevance. Two-dimensional (2D) materials, a novel family of multifunctional materials, are widely used in membrane separation due to their unique structure and properties. In this respect, as a novel 2D material, graphitic carbon nitride (g-C3N4) have found specific attention in membrane separation. This study reviews the application of carbon nitride in gas separation membranes, pervaporation membranes, nanofiltration membranes, reverse osmosis membranes, ion exchange membranes and catalytic membranes, along with describing the separation mechanisms.
Graphite Phase Carbon Nitride Based Membrane for Selective Permeation

Yang Wang,Niannian Wu,Yan Wang,Huan Ma,Junxiang Zhang,Lili Xu,Mohamed K. Albolkany,Bo Liu

DOI: https://doi.org/10.1038/s41467-019-10381-z

IF: 16.6

2019-01-01

Nature Communications

Abstract:Precise control of interlayer spacing and functionality is crucial in two-dimensional material based membrane separation technology. Here we show anion intercalation in protonated graphite phase carbon nitride (GCN) that tunes the interlayer spacing and functions of GCN-based membranes for selective permeation in aqueous/organic solutions. Sulfate anion intercalation leads to a crystalline and amphipathic membrane with an accessible interlayer spacing at ~10.8 Å, which allows high solvent permeability and sieves out the solutes with sizes larger than the spacing. We further extend the concept and illustrate the example of GCN-based chiral membrane via incorporating (1R)-(-)-10-camphorsulfonic anion into protonated GCN layers. The membrane exhibits a molecular weight cutoff around 150 among various enantiomers and highly enantioselective permeation towards limonene racemate with an enantiomeric excess value of 89%. This work paves a feasible way to achieve water purification and chiral separation technologies using decorated laminated membranes.
Review of 2D Graphitic Carbon Nitride-Based Membranes: Principles, Syntheses, and Applications

Zhou Chen,Yihong Lan,Yubin Hong,Weiguang Lan

DOI: https://doi.org/10.1021/acsanm.2c03416

IF: 6.14

2022-08-25

ACS Applied Nano Materials

Abstract:Membrane separation is a central area of research in chemical engineering because of its important status as the key technology in chemical separation and water treatment processes. Recently, polymeric graphitic carbon nitride (g-C3N4) has emerged as a candidate material for membrane applications because of its appealing physiochemical properties and ease of fabrication. Herein we review the progress of g-C3N4-based membranes, including the peculiarity of two-dimensional (2D) g-C3N4, the tailoring of functionality, and integration into membrane stacks for practical applications in gas separation, water purification, pervaporation, photocatalytic water filtration, oil-in-water separation, and polymer electrolyte membranes. Moreover, possible development directions of g-C3N4-based membranes are discussed along with the current challenges and future perspectives.

materials science, multidisciplinary,nanoscience & nanotechnology
A review: g-C3N4 as a new membrane material

Shiyu Wang,Liyan Wang,Hongjin Cong,Rui Wang,Jiali Yang,Xinyi Li,Yang Zhao,Huan Wang,Shiyu Wang,Liyan Wang,Hongjin Cong,Rui Wang,Jiali Yang,Xinyi Li,Yang Zhao,Huan Wang

DOI: https://doi.org/10.1016/j.jece.2022.108189

IF: 7.7

2022-08-01

Journal of Environmental Chemical Engineering

Abstract:Graphitized carbon nitride (g-C3N4), as a typical two-dimensional nano-material, has become a popular candidate material for functional membranes because of its customizable structure and good stability. Firstly, this paper introduces the basic properties, preparation methods and modification methods of original g-C3N4. Then, a series of construction methods of g-C3N4-based composite membranes are summarized. Finally, we focus on several typical applications such as ultrafiltration membranes, oil-water separation membranes, pollutant degradation membranes, osmosis membranes (traditional reverse osmosis membranes, reverse osmosis membranes, and forward osmosis membranes), pervaporation membranes, and gas phase separation membranes.

engineering, chemical, environmental
Emerging Graphitic Carbon Nitride-Based Membranes for Water Purification

Yuqi Cui,Xiaoqiang An,Shun Zhang,Qingwen Tang,Huachun Lan,Huijuan Liu,Jiuhui Qu

DOI: https://doi.org/10.1016/j.watres.2021.117207

IF: 12.8

2021-01-01

Water Research

Abstract:Membrane separation is a promising technology that can effectively remove various existing contaminants from water with low energy consumption and small carbon footprint. The critical issue of membrane technology development is to obtain a low-cost, stable, tunable and multifunctional material for membrane fabrication. Graphitic carbon nitride (g-C3N4) has emerged as a promising membrane material, owing to the unique structure characteristics and outstanding catalytic activity. This review paper outlined the advanced material strategies used to regulate the molecule structure of g-C3N4 for membrane separation. The presentative progresses on the applications of g-C3N4-based membranes for water purification have been elaborated. Essentially, we highlighted the innovation integration of physical separation, catalysis and energy conversion during water purification, which was of great importance for the sustainability of water treatment techniques. Finally, the continuing challenges of g-C3N4-based membranes and the possible breakthrough directions in the future research was prospected. (C) 2021 Published by Elsevier Ltd.
Impact of Graphitic Carbon Nitride/polydopamine on Permeance and Antifouling Performance of Reverse Osmosis Membranes

Mengni Ge,Jianfeng Zhang,Yuanyuan Qi,Yan Zhao,Lin Zhang,Gaiye Li,Zhuofan Gao,Zhuo Huang,Bart Van der Bruggen

DOI: https://doi.org/10.1016/j.seppur.2024.130949

IF: 8.6

2024-01-01

Separation and Purification Technology

Abstract:Nanotechnology advancements have significantly contributed to the development of thin-film nanocomposite (TFN) reverse osmosis membranes for addressing global water scarcity through more efficient separation and purification processes. However, the impact of nanomaterials on membrane preparation, structure, and performance remains insufficiently understood. In this study, graphitic carbon nitride/polydopamine (g-C3N4/PDA) incorporated TFN membrane was proposed and systematically investigated through experimental methods and molecular dynamics (MD) simulations. The incorporation of g-C3N4/PDA increased the resistance to MPD diffusion during the interfacial polymerization process, the obtained TFN membrane displayed a thinner, smoother active layer and enhanced hydrophilicity. Therefore, the membrane exhibited a remarkable water flux of 53.43 L·m−2·h−1, triple that of the conventional membrane, with a NaCl rejection of 98.9 %. Meanwhile, the TFN membrane displayed excellent antifouling properties against both organic, inorganic and mixed foulants, maintaining a high flux recovery rate during long-term operation. MD simulation further revealed the stable interaction between g-C3N4/PDA nanocomposites and the polyamide matrix, enhancing structural compatibility and improving membrane performance. This study provides insights into the role of nanomaterials in the active layer of the membrane, offering both theoretical and practical guidance for the design of advanced TFN membranes with enhanced water permeance and antifouling performance.
Two-dimensional Graphitic Carbon Nitride-Based Membranes for Filtration Process: Progresses and Challenges

Germain Akonkwa Mulungulungu,Tingting Mao,Kai Han

DOI: https://doi.org/10.1016/j.cej.2021.130955

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Two-dimensional (2D) graphitic carbon nitride (g-C3N4) membranes with lamellar structure have gained extensive attention in the past decade due to their good separation performance. Studies carried out on the filtration performance in the fields of Microfiltration, Ultrafiltration, Nanofiltration, Reverse and Forward osmosis reveal that 2D g-C3N4-based membranes have a high selectivity towards all kinds of contaminants present in water such as organic components as well as divalent and monovalent ions while maintaining high permeability and that by their photocatalytic properties they are able to remedy the membrane fouling thus allowing long-term use over several cycles of filtration process. Therefore, the limitations encountered by conventional polymeric membranes have thus been corrected by the use of 2D nanomaterials-based membranes such as g-C3N4. This review mainly focuses on summarizing recent trends in research on g-C3N4 nanosheets-based membrane filtration, including g-C3N4 nanosheets and membrane fabrication, composition and application. We also attempt to provide future directions in which the field is likely to be realized. The key challenges and issues related to the synthesis and application of g-C3N4-based membranes in the filtration field are highlighted.
Advanced graphitic carbon nitride-based membranes for ionic resource recovery

Mengni Ge,Qin Chen,Yan Zhao,Jianfeng Zhang,Bart Van der Bruggen,Raf Dewil

DOI: https://doi.org/10.1016/j.cej.2023.148445

IF: 15.1

2024-01-10

Chemical Engineering Journal

Abstract:Resource recovery from wastewater, seawater and salt lakes has attracted significant attention due to its economic and environmental benefits. Recent achievements in membrane technology have allowed efficient recovery of ionic resources from water, and various membranes have been developed to selectively reject, and recover salts and metals in water steams. With the requirement of high ion selectivity, a wide range of nanomaterials are employed in these membranes. Graphitic carbon nitride (g-C 3 N 4 ), as two-dimensional nanosheets, with an abundant and intrinsically uniform pore structure network, tunable interlayer spaces, easy and low-cost synthesis, tailored functionality and promising stability, shows high prospects for ion-selective separation. This comprehensive review outlines the development of advanced g-C 3 N 4 -based membranes for ionic resource recovery. First, design strategies of g-C 3 N 4 nanosheets for membranes are highlighted in terms of experimental characteristics and molecular dynamic simulations. Next, g-C 3 N 4 -based membranes made as lamellar membranes and mixed matrix membranes are emphasized, based on their preparation method. Finally, current applications of g-C 3 N 4 -based membranes in ionic resource recovery are presented: valuable ion extraction, metal ion separation, radionuclide capture and desalination. This tutorial review provides insightful guidance on the design strategies, fabrication methods and ionic resource recovery applications of g-C 3 N 4 -based membranes for resource sustainability.

engineering, chemical, environmental
Fast Hydrogen Purification Through Graphitic Carbon Nitride Nanosheet Membranes

Yisa Zhou,Ying Wu,Haoyu Wu,Jian Xue,Li Ding,Rui Wang,Haihui Wang

DOI: https://doi.org/10.1038/s41467-022-33654-6

IF: 16.6

2022-01-01

Nature Communications

Abstract:Two-dimensional graphitic carbon nitride (g-C3N4) nanosheets are ideal candidates for membranes because of their intrinsic in-plane nanopores. However, non-selective defects formed by traditional top-down preparation and the unfavorable re-stacking hinder the application of these nanosheets in gas separation. Herein, we report lamellar g-C3N4 nanosheets as gas separation membranes with a disordered layer-stacking structure based on high quality g-C3N4 nanosheets through bottom-up synthesis. Thanks to fast and highly selective transport through the high-density sieving channels and the interlayer paths, the membranes, superior to state-of-the-art ones, exhibit high H-2 permeance of 1.3 x 10(-6) mol m(-2) s(-1) Pa-1 with excellent selectivity for multiple gas mixtures. Notably, these membranes show excellent stability under harsh practice-relevant environments, such as temperature swings, wet atmosphere and long-term operation of more than 200 days. Therefore, such lamellar membranes with high quality g-C3N4 nanosheets hold great promise for gas separation applications.
g-C3N4 nanosheets with tunable affinity and sieving effect endowing polymeric membranes with enhanced CO2 capture property

Long Cheng,Yuyang Song,Huimin Chen,Guozhen Liu,Gongping Liu,Wanqin Jin

DOI: https://doi.org/10.1016/j.seppur.2020.117200

IF: 8.6

2020-11-01

Separation and Purification Technology

Abstract:Two-dimensional (2D) materials have emerged as excellent nano-building blocks for high performance membranes. Among them, graphitic carbon nitride (g-C3N4) nanosheets possess intrinsic nanopores in plane and CO2-philic property from the rich amine groups, which are in favor of selective transport of CO2 molecules. Herein, for the first time, g-C3N4 nanosheets with tunable CO2 adsorption properties and nanostructures were synthesized and incorporated into polyether block amide (Pebax) membrane for CO2 separation. The g-C3N4 nanosheets with variable adsorption properties were produced from two monomers, dicyandiamide and melamine, and the variation of nanostructures was controlled by thermal oxidation etching process. The effects of CO2-philic and molecular sieving properties of g-C3N4 nanosheets on solubility and diffusivity of gas molecules in the as-prepared membranes were systematically investigated. The results demonstrated that the g-C3N4 nanosheets produced from dicyandiamide and undergoing 4 h thermal etching (DCN-4 nanosheets) showed the optimal CO2 sorption and sieving property. The membrane with 0.25 wt% DCN-4 nanosheets exhibited simultaneous enhancement in CO2 permeance and CO2/N2 selectivity compared with pure Pebax membrane. Moreover, the membrane maintained its separation performance during long-term operation test, showing great potential for CO2 capture.

engineering, chemical
Graphene Oxide-Modified G-C3n4 Nanosheet Membranes for Efficient Hydrogen Purification

Yisa Zhou,Ya Zhang,Jian Xue,Rui Wang,Zongjie Yin,Li Ding,Haihui Wang

DOI: https://doi.org/10.1016/j.cej.2021.129574

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Highly permeable and selective membranes are desirable for energy-efficient gas separation. Two-dimensional graphitic carbon nitride (g-C3N4) has attracted significant attention owing to its suitable pore size, high pore density, and thus minimal mass-transfer barrier. Nevertheless, it is difficult to retain the structural integrity of its two-dimensional plane during the delamination of bulky g-C3N4 into nanosheets, which has greatly hindered the preparation of high-quality g-C3N4 gas separation membranes. In this study, flexible graphene oxide (GO) nanosheets containing abundant functional groups were used to cover and remedy some defects in g-C3N4 nanosheets. Consequently, a continuous g-C3N4-GO membrane was obtained that exhibited excellent H2 permeation performance (H2 permeance: 2.16 x 10-7 mol m- 2 s- 1 Pa-1, H2/CO2 selectivity: 39.2) and good stability, which is promising for practical hydrogen separation processes.
Coordination-Assistant Chiral Agent Anchoring on Amphiphilic Graphitic Phase Carbon Nitride Membrane for Multiple Molecular Separation

Qing Hu,Chaofeng Zhu,Wen Yan,Yang Wang,Songlin Cui,Xihai Chen,Bo Liu

DOI: https://doi.org/10.1021/acsami.2c15795

2022-11-01

Abstract:Membranes composed of two-dimensional (2D) materials suffer from low stability and structural swelling and are usually restricted to applications in aqueous systems. Among various 2D materials, graphitic phase carbon nitride (GCN, g-C(3)N(4)) has shown great application potential owing to its structural tunability. Herein, we develop a coordination-assisted strategy to regulate the GCN layer spacing and chemical environment via copper ion (Cu^(2+)) coordination-assisted intercalation of...

materials science, multidisciplinary,nanoscience & nanotechnology
A review on graphitic carbon nitride (g-C3N4) based hybrid membranes for water and wastewater treatment

Xiang Li,Guohe Huang,Xiujuan Chen,Jing Huang,Mengna Li,Jianan Yin,Ying Liang,Yao Yao,Yongping Li

DOI: https://doi.org/10.1016/j.scitotenv.2021.148462

2021-01-01

Abstract:Graphitic carbon nitride (g-C3N4) has gained enormous attention for water and wastewater treatment. Compared with g-C3N4 nanopowders, g-C3N4 based hybrid membranes have demonstrated great potential for its superior practicability. This review outlines the preparation and characterization of g-C3N4 based hybrid membranes and presents their representative applications in water and wastewater treatment (e.g., removal of organic dyes, phenolic compounds, pharmaceuticals, salt ions, heavy metals, and oils). Meanwhile, g-C3N4 based films for the removal of contaminants through photocatalytic degradation is also summarized. In addition, the corresponding mechanisms and relevant findings are discussed. Finally, the challenges and research needs in the future and application of g-C3N4 based hybrid membranes are highlighted.
Enhanced CO 2 Separation by Functionalized g-C 3 N 4 Nanosheets as Composite Filler to Fabricate Mixed Matrix Membranes

Zhenhua Niu,Yuanyuan Wang,Yangyang Dai,Suyue Zhong,Jinyun Li,Peng Mu,Jian Li

DOI: https://doi.org/10.1021/acs.macromol.3c00755

IF: 5.5

2023-08-03

Macromolecules

Abstract:Membrane separation technology has become a very effective separation technology for CO2 reduction, saving about 90% of energy consumption. However, the CO2 separation performance of gas separation membranes is limited by the “trade-off” between permeance and selectivity in the separation process. Herein, g-C3N4-GO/Pebax-1657 MMMs (mixed matric membranes) were prepared by a solution casting method by combining graphene oxide (GO) nanosheets with g-C3N4 nanosheets as composite fillers, and the membrane possesses excellent thermal stability and mechanical properties. Among them, GO nanosheets containing abundant functional groups were used to repair nonselective defects in g-C3N4 nanosheets (amide bonds were formed between them). The prepared g-C3N4-GO0.30/Pebax MMM possesses excellent CO2 separation performance (CO2 permeance of 815.11 GPU and selectivity of 48.37 for CO2/N2 separation; CO2 permeance of 737.99 GPU and selectivity of 44.94 for CO2/CH4 separation). This study provides theoretical and experimental guidance for the design and preparation of a practical CO2 separation membrane.

polymer science
Highly Permeable and Antifouling Reverse Osmosis Membranes with Acidified Graphitic Carbon Nitride Nanosheets As Nanofillers

Xiang Gao,Yiming Li,Xiaolong Yang,Yanan Shang,Yong Wang,Baoyu Gao,Zhining Wang

DOI: https://doi.org/10.1039/c7ta06348b

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Ultrathin graphitic carbon nitride (gCN) nanosheets, due to their two-dimensional graphene-like structure, regularly distributed triangular nanopores and structural defects on the laminar network, have attracted great research attention in fabricating high-performance water selective membranes.
Constructing MOF-doped two-dimensional composite material ZIF-90@C3N4 mixed matrix membranes for CO2/N2 separation

Fei Guo,Dongsheng Li,Rui Ding,Jiaming Gao,Xuehua Ruan,Xiaobin Jiang,Gaohong He,Wu Xiao

DOI: https://doi.org/10.1016/j.seppur.2021.119803

IF: 8.6

2022-01-01

Separation and Purification Technology

Abstract:Two-dimensional nanomaterials have the characteristics of high aspect ratio and high space utilization, which has huge potential advantages in gas separation. In this work, g-C3N4 two-dimensional nanosheets with sieving pore structure were selected as templates and combined with ZIF-90 to construct a 0-dimensional/2-dimensional composite material ZIF-90@C3N4 (ZCN). The complete two-dimensional g-C3N4 nanosheets were stripped under acid etching conditions at 25 °C. ZIF-90 was distributed in an orderly manner on the two-dimensional nanosheets, and the nanosheets were spread out due to the growth of ZIF-90 to provide more free volume. The gas permeation experiment proved that the ZCN has a better CO2/N2 separation performance. The ZCN/Pebax mixed matrix membrane (MMM) with the optimized 8.0 wt% ZCN loading showed an improved CO2 permeability of 110.5 Barrer and a CO2 /N2 selectivity of 84.4, surpassing the Robeson upper bound (2008). The results demonstrated that the designed composite filler with 2D nanosheets is an effective strategy to enhance gas separation performance of MMMs and verified the application potential in gas purification industry.

engineering, chemical
Modification of Alumina Hollow Fibers and In-Situ Synthesis of ZIF-8 Membranes

YIN Zhengchi,WU Xiaoke,YANG Yanwei,ZHANG Huayu,ZHU Ruimin,WANG Zhengbao

DOI: https://doi.org/10.11730/j.issn.1001-7631.2023.01.0001.10

2023-01-01

Abstract:Graphitic carbon nitride （GCN） was deposited on alumina hollow fibers by chemical vapor deposition for modification,and ZIF-8 membranes were prepared by in-situ crystallization on the modified supports.The effects of GCN loading temperature,loading amount,precursor type and the amount of sodium formate in the synthesis solution were investigated by X-ray diffraction （XRD）,Fourier infrared spectroscopy （FTIR）,scanning electron microscopy （SEM） and gas permeation tests.It was found that the suitable temperature for loading GCN onto the alumina support surface was 350℃.The higher the temperature,the higher the C/N ratio of GCN on the support surface and the fewer N sites,which was less favorable for the in-situ crystallization of ZIF-8 membranes.At the same loading temperature,the longer the loading time,the higher the coverage （loading amount） of GCN on the alumina support.If the loading amount was too small,a dense membrane cannot be formed.Compared with melamine,using urea as the precursor for chemical vapor deposition,the loading amount decreased significantly under the same loading conditions,and finally a dense membrane could not be formed.The content of sodium formate in the synthesis solution was regulated and controlled,and the optimized formula of the synthesis solution was that the molar ratio of Zn Cl 2 ,Hmim （2-methylimidazole）,HCOONa and CH 3 OH was 1:1.5:2.0:250.The obtained ZIF-8 membrane showed the H 2 permeance of 6.11×10 -7 mol/（Pa·s·m~2）,and the ideal separation selectivity of H 2 /N 2 was 5.1.
Constructing MOF-doped two-dimensional composite material ZIF-90@C3N4 mixed matrix membranes for CO2/N2 separation

Fei Guo,Dongsheng Li,Rui Ding,Jiaming Gao,Xuehua Ruan,Xiaobin Jiang,Gaohong He,Wu Xiao

DOI: https://doi.org/10.1016/j.seppur.2021.119803

IF: 8.6

2022-01-01

Separation and Purification Technology

Abstract:Two-dimensional nanomaterials have the characteristics of high aspect ratio and high space utilization, which has huge potential advantages in gas separation. In this work, g-C3N4 two-dimensional nanosheets with sieving pore structure were selected as templates and combined with ZIF-90 to construct a 0-dimensional/2-dimensional composite material ZIF-90@C3N4 (ZCN). The complete two-dimensional g-C3N4 nanosheets were stripped under acid etching conditions at 25 degrees C. ZIF-90 was distributed in an orderly manner on the two-dimensional nano-sheets, and the nanosheets were spread out due to the growth of ZIF-90 to provide more free volume. The gas permeation experiment proved that the ZCN has a better CO2/N-2 separation performance. The ZCN/Pebax mixed matrix membrane (MMM) with the optimized 8.0 wt% ZCN loading showed an improved CO2 permeability of 110.5 Barrer and a CO2/N-2 selectivity of 84.4, surpassing the Robeson upper bound (2008). The results demonstrated that the designed composite filler with 2D nanosheets is an effective strategy to enhance gas separation performance of MMMs and verified the application potential in gas purification industry.
All‐Carbon Nanoarchitectures As High‐Performance Separation Membranes with Superior Stability

Kunli Goh,Wenchao Jiang,Huseyin Enis Karahan,Shengli Zhai,Li Wei,Dingshan Yu,Anthony G. Fane,Rong Wang,Yuan Chen

DOI: https://doi.org/10.1002/adfm.201502955

IF: 19

2015-01-01

Advanced Functional Materials

Abstract:The application of graphene‐based membranes is hindered by their poor stability under practical hydrodynamic conditions. Here, nanocarbon architectures are designed by intercalating surface‐functionalized, small‐diameter, multi‐walled carbon nanotubes (MWCNTs) into reduced graphene oxide (rGO) sheets to create highly stable membranes with improved water permeability and enhanced membrane selectivity. With the intercalation of 10 nm diameter MWCNTs, the water permeability reaches 52.7 L m−2 h−1 bar−1, which is 4.8 times that of pristine rGO membrane and five to ten times higher than most commercial nanofiltration membranes. The membrane also attains almost 100% rejection for three organic dyes of different charges. More importantly, the membrane can endure a turbulent hydrodynamic flow with cross‐flow rates up to 2000 mL min−1 and a Reynolds number of 4667. Physicochemical characterization reveals that the inner graphitic walls of the MWCNTs can serve as spacers, while nanoscale rGO foliates on the outer walls interconnect with the assimilated rGO sheets to instill superior membrane stability. In contrast, intercalating with single‐walled nanotubes fails to reproduce such stability. Overall, this nanoarchitectured design is highly versatile in creating both graphene‐rich and CNT‐rich all‐carbon membranes with engineered nanochannels, and is regarded as a general approach in obtaining stable membranes for realizing practical applications of graphene‐based membranes.
Nanographitic carbon nitride

Ze-Sheng Li,Changlin Yu

2024-01-01

Abstract:Graphitic carbon nitride (g-C3N4) has excellent physicochemical properties, including adjustable band gap, large specific surface area, abundant active sites, and easy surface modification. Nanostructured g-C3N4 shows promising application prospects in environmental photocatalysis degradation and energy conversion, electrochemical energy conversion, and storage, where the current applications include photocatalysis, electrocatalysis, batteries, and supercapacitors. The electronic conductivity of g-C3N4 can be improved by carbon composite design, phosphorus doping, and reduction of nitrogen content, which broadens the way for the application of g-C3N4 in the electrochemical and photo-electrocatalysis fields. In this chapter, the structural features, preparation methods, energy and environmental applications, and typical case analysis of nano-g-C3N4 are briefly analyzed and summarized.

Graphitic Carbon Nitride (G-C3n4)-based Membranes for Advanced Separation

Two-dimensional Graphitic Carbon Nitride for Membrane Separation

Graphite Phase Carbon Nitride Based Membrane for Selective Permeation

Review of 2D Graphitic Carbon Nitride-Based Membranes: Principles, Syntheses, and Applications

A review: g-C3N4 as a new membrane material

Emerging Graphitic Carbon Nitride-Based Membranes for Water Purification

Impact of Graphitic Carbon Nitride/polydopamine on Permeance and Antifouling Performance of Reverse Osmosis Membranes

Two-dimensional Graphitic Carbon Nitride-Based Membranes for Filtration Process: Progresses and Challenges

Advanced graphitic carbon nitride-based membranes for ionic resource recovery

Fast Hydrogen Purification Through Graphitic Carbon Nitride Nanosheet Membranes

g-C3N4 nanosheets with tunable affinity and sieving effect endowing polymeric membranes with enhanced CO2 capture property

Graphene Oxide-Modified G-C3n4 Nanosheet Membranes for Efficient Hydrogen Purification

Coordination-Assistant Chiral Agent Anchoring on Amphiphilic Graphitic Phase Carbon Nitride Membrane for Multiple Molecular Separation

A review on graphitic carbon nitride (g-C3N4) based hybrid membranes for water and wastewater treatment

Enhanced CO 2 Separation by Functionalized g-C 3 N 4 Nanosheets as Composite Filler to Fabricate Mixed Matrix Membranes

Highly Permeable and Antifouling Reverse Osmosis Membranes with Acidified Graphitic Carbon Nitride Nanosheets As Nanofillers

Constructing MOF-doped two-dimensional composite material ZIF-90@C3N4 mixed matrix membranes for CO2/N2 separation

Modification of Alumina Hollow Fibers and In-Situ Synthesis of ZIF-8 Membranes

Constructing MOF-doped two-dimensional composite material ZIF-90@C<sub>3</sub>N<sub>4</sub> mixed matrix membranes for CO<sub>2</sub>/N<sub>2</sub> separation

All‐Carbon Nanoarchitectures As High‐Performance Separation Membranes with Superior Stability

Nanographitic carbon nitride