Abstract:Exposure to ultraviolet (UV) radiation may cause the significant degradation of many materials. UV radiation causes photooxidative degradation which results in breaking of the polymer chains, produces free radical and reduces the molecular weight, causing deterioration of mechanical properties and leading to useless materials, after an unpredictable time. Polystyrene (PS), one of the most important material in the modern plastic industry, has been used all over the world, due to its excellent physical properties and low-cost. When polystyrene is subjected to UV irradiation in the presence of air, it undergoes a rapid yellowing and a gradual embrittlement. The mechanism of PS photolysis in the solid state (film) depends on the mobility of free radicals in the polymer matrix and their bimolecular recombination. Free hydrogen radicals diffuse very easily through the polymer matrix and combine in pairs or abstract hydrogen atoms from polymer molecule. Phenyl radical has limited mobility. They may abstract hydrogen from the near surrounding or combine with a polymer radical or with hydrogen radicals. Almost all synthetic polymers require stabilization against adverse environmental effects. It is necessary to find a means to reduce or prevent damage induced by environmental components such as heat, light or oxygen. The photostabilization of polymers may be achieved in many ways. The following stabilizing systems have been developed, which depend on the action of stabilizer: (1) light screeners, (2) UV absorbers, (3) excited-state quenchers, (4) peroxide decomposers, and (5) free radical scavengers; of these, it is generally believed that excited-state quenchers, peroxide decomposers, and free radical scavengers are the most effective. Research into degradation and ageing of polymers is extremely intensive and new materials are being synthesized with a pre-programmed lifetime. New stabilizers are becoming commercially available although their modes of action are sometimes not thoroughly elucidated. They target the many possible ways of polymer degradation: thermolysis, thermooxidation, photolysis, photooxidation, radiolysis etc. With the goal to increase lifetime of a particular polymeric material, two aspects of degradation are of particular importance: Storage conditions, and Addition of appropriate stabilizers. A profound knowledge of degradation mechanisms is needed to achieve the goal.

Polymer degradation and stability

Characterization of Polymer Aging: A Review

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

Physics and Chemistry-Based Constitutive Modeling of Photo-Oxidative Aging in Semi-Crystalline Polymers

Polymer Degradation: Category, Mechanism and Development Prospect

Polymer degradation: a short review

Resin Systems and Chemistry: Degradation Mechanisms and Durability

Characterization Techniques of Polymer Biodegradation Properties

Deterioration of polypropylene/silicon dioxide nanocomposites before oxidative degradation

Photodegradation and photostabilization of polymers, especially polystyrene: review

Factors Affecting The Ageing Of Polymer Composite: A State Of Art

Visualized Degradation of Poly(alkynoate)s Toward Diols and Structure Controlled Multifunctional N-Heterocyclic Compounds

The Aging of Polymers under Electromagnetic Radiation

Effect of Thermal Oxidative Aging on the Crystallization Behavior and Properties of Nylon-6

Investigation of Polymer Aging Mechanisms Using Molecular Simulations: A Review

Thermal and mechanical degradation during polymer extrusion processing

Natural Photo-Aging Degradation of Polypropylene Nanocomposites

Molecular dynamics simulation of aging properties in polymer materials: a review

Oxidative Degradation Products Analysis of Polymer Materials by Pyrolysis Gas Chromatography–mass Spectrometry

Perspectives on yellowing in the degradation of polymer materials: inter-relationship of structure, mechanisms and modes of stabilisation

Effect of Structure and Morphology on Photo-Oxidation Degradation of Polyethylene