Abstract:In real sea states, damage incidents on offshore floating structures are not due to the whole time series of wave elevation characterized as statistical one but due to few extreme waves or wave groups in irregular wave train. So, using CFD tools to precisely simulate predetermined irregular wave train will lay sound basis for understanding the local characteristic of the flow field and impact loads on offshore floating structures when damage incidents occur. In this article, the generation of single extreme wave is investigated in a numerical wave tank. First, experimental irregular wave train is decomposed into certain number of smallamplitude waves. The Fourier series expansion is performed to determine the amplitude and initial phase angle of each wave component. A hydrodynamic transfer function is used to calculate the amplitude of wave-maker motion associated with each wave component. Then superposition is carried out on all of the wave-maker motion components to get the final wave-maker motion. With the wave-maker motion as input, simulation of the single extreme irregular wave train is modeled successfully. Then the method is applied to simulating a much more complicated irregular wave train. Once again main features of the complicated irregular wave train are reproduced compared with experiment carried out in the new deepwater experimental basin at Shanghai Jiao Tong University. In the simulation, dynamic mesh method is enabled to model the piston-type wave-maker, the Volume Of Fluid (VOF) method is employed to capture the free surface and a dissipation zone is introduced to deal with wave reflection.

Simulation of Flow Field in the Process of Wave Impact on Beam-plate Structures

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

Impact of Multiphase Flow Simulation of Breaking Waves on a Vertical Seawall with a Recurved Parapet

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Numerical Study of Violent Impact Flow Using a CIP-Based Model

Simulations of Interaction Between Flow and a Thin Elastic Beam Using Cip-Based Model with Adaptive Mesh

A CIP-based Numerical Simulation of Freak Wave Impact on a Floating Body

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Numerical Investigations of Dam-Break Flow Impacting on an Elastic Beam Using Various FSI Coupling Algorithms

Numerical Study of Wave Impact on the Deck-House Caused by Freak Waves

Response Of Beams Under The Impact Of Freak Waves

A semi-analytical method to simulate hydroelastic slamming of 2D structural sections by coupling Wagner theory with the finite element method

A Review of Numerical Studies of Wave Impacts on Marine Structures

Simulation of flat-bottom structure slamming

Dynamic Response of a Horizontal Plate Dropping Onto Nonlinear Freak Waves Using a Fluid–structure Interaction Method

Numerical Simulation of Wave Impact on the Slab

Numerical Simulation of Irregular Wave-Simulating Irregular Wave Train

Numerical Simulation Of Free Surface Flow With An Elastic Plate Using A Cip-Based Model

Numerical Simulation of Wave Overtopping over Seawalls

Experimental and Numerical Prediction of Slamming Impact Loads Considering Fluid–Structure Interactions

Numerical Study of Nonlinear Freak Wave Impact Underneath a Fixed Horizontal Deck in 2-D Space