Abstract:With the development of steel-structure construction technology in high-rise buildings, the design and construction of high-rise steel structures tend to be complicated. Based on the Zhuhai Tiejian Square project, the fluid-structure coupling calculation analysis and on-site monitoring are carried out in view of the wind load of the high-altitude steel-structure connecting bridge in the hoisting stage of the Zhuhai Tiejian Square project. The main structure of the project is four towers and five high-altitude, small-spacing steel structures connecting the four towers. The lifting process of the third zone is taken as the analysis object, and the hoisting idea of "low-altitude hoisting, overall lifting" is adopted. Because the span of the high-altitude steel-structure connecting bridge is small and the installation height is high, the influence of wind load on the hoisting process cannot be ignored. Therefore, the unidirectional fluid-structure coupling model of the high-altitude small-space steel-structure connecting bridge in the third zone was established by using CFD calculation software ANSYS Fluent 2022 R1, and the corresponding flow field and solid calculation results were obtained and analyzed. The analysis results show that the lifting structure still produces a certain deformation when the wind speed is 5 m/s or 10 m/s, and the calculation results show that the stress calculation results are still within the safe range of steel strength for the sensitivity of the lifting structure under wind load. With the increase of wind speed, the local maximum stress of the structure increases greatly, but the overall deformation remains stable, which indicates that the greatest challenge of hoisting steel structures under wind load may be the stability direction rather than the strength, so it is necessary to strictly monitor the displacement deformation of the structure during construction. Then, through the monitoring of the overall lifting process of the high-altitude, large-span, steel-connected structure of Zhuhai Tiejian Square from pre-lifting to formal lifting, real-time monitoring and data analysis show that the lifting process of the high-altitude steel bridge of Zhuhai Tiejian Square is safe and reliable, the force transformation of each component is reasonable, the lifting process is relatively stable, the external environment has little impact, and the expected monitoring effect has been achieved. The calculation simulation and on-site monitoring in this paper can provide theoretical and practical guidance for the construction safety under the influence of wind load in the construction process of high-altitude steel-structure hoisting, and provide an important reference value for similar projects.

Study on the Wear of the UB Hanging Plate of the Ground Wire Suspension String Clamp in the Continuous Stable Wind Area

Field measurement of wind pressure and wind-induced vibration of large-span spatial cable-truss system under strong wind or typhoon

Wind resistance analysis and research of truss string structure used for platform canopy of railway station

Design and Research of the Long-Span Truss String Structure for the Platform Canopy of Beijing North Station

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Influence of Refined Wind Load Parameters and Wind-Loading Mode on Wind-Induced Responses of a Long Cross-Arm Angle-Steel Transmission Tower

Study on the Dynamic Characteristics of Tensional Force for Ice Accumulated Overhead Lines Considering Instantaneous Wind Speed

Study on the Wind Deviation Characteristics of Y-Type Insulator String under the Action of Strong Wind

Experimental Study of Wind Loads on Tubular Crossarms of Transmission Towers

Design and characteristics analysis of a new vibration reduction system for in service long span transmission tower

Development of joint probability distribution of wind speed and direction using long-term monitoring data

Analysis and Comparison on Wind Load of Long Span Girder Bridges with High Pier

Investigation of wind load characteristics of cantilevered scaffolding of a high-rise building based on field measurement

Numerical Simulation of the Dynamic Responses of Electric Power Fitting of Transmission Lines after Ice Shedding

Analysis and Real-Time Monitoring of the Influence of Wind Load on a High-Altitude Steel Connecting Bridge with Small Spacing

Fluctuating Aerodynamic Characteristics and Wind-Induced Swing Response of Typical Iced Conductors

Fatigue life evaluation on wire rope suspenders of the suspension bridge based on a time-varying degradation process

Experimental Analysis on Temperature Distribution of Ground Wire Suspension String with Winding Preformed Armor Rod

Experimental Investigation on the Breakage in Earth Wire Suspension String with Winding Preformed Armor Rods

Corrosion fatigue analysis of suspenders on continuous suspension bridge under combined action of wind and traffic

Study on wind-induced fatigue performance of large-span transmission tower-line system considering the combined distribution probability of wind direction and speed