Abstract:Due to the frequently changing working conditions and complex operating environment of electric vehicle permanent magnet synchronous motor(PMSM), the motor parameters change dramatically. However, the performance of the PI current regulator, which is the most widely used, is sensitive to motor parameters and has weak robustness, which will lead to the deterioration of motor control system performance. To address this problem, active disturbance rejection control (ADRC) technology is applied to the PMSM current loop control. Firstly, the traditional ADRC current regulator is designed, and the performance and parameter tuning laws of the extended state observer are analyzed by the method of frequency domain analysis. Then, the traditional ADRC algorithm is improved in three aspects: observation error compensation, utilization of model information and anti-windup. After that, simulations and bench test validation are performed. The simulation results show that the improved ADRC current regulator is more robust in the face of parameter changes. The torque step test results show that the improved ADRC current regulator has fast dynamic response without overshoot and has high robustness when the motor parameters change. The dynamic test results show that the improved ADRC current regulator has high robustness when the load, speed and motor parameters change, and the anti-windup measures designed can effectively overcome the integral saturation phenomenon.

Torque Ripple Suppression of Permanent Magnet Synchronous Motor Based on Robust Current Injection

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Improved 2-Order Active Disturbance Rejection Control for PMSM

Current Control Method of Vehicle Permanent Magnet Synchronous Motor Based on Active Disturbance Rejection Control

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Active Disturbance Rejection Control for PMSM Servo System Applied in Industrial Sewing Machines

Torque Ripple Suppression of Open-Winding PMSMs by Current Injection Considering Magnetic Saturation

Attenuation Of Pmsm Torque-Ripple Based On Combination Of Equivalent-Input-Disturbance Approach And Sliding-Mode Control

Torque Ripple Suppression of Brushless DC Motor Drive System Based on Improved Harmonic Injection Active Disturbance Rejection Control

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Research on a Torque Ripple Suppression Method of Fuzzy Active Disturbance Rejection Control for a Permanent Magnet Synchronous Motor

Modeling and Suppression of Torque Ripple in PMSM Based on the General Airgap Field Modulation Theory

A Robust Deadbeat Predictive Current Control Method for IPMSM

Torque Ripple Minimization of IPMSM Drives with Current Injection Derived from Torque Error

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

A modified model predictive current control of SRMs for torque ripple suppression

Adaptive Active Disturbance Rejection Control for Uncertain Current Ripples Suppression of PMSM Drives

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors