Aqueous-based electrospun P(NIPAAm-co-AAc)/RSF medicated fibrous mats for dual temperature- and pH-responsive drug controlled release

Juan Li,Jingxin Zhu,Lan Jia,Yanlong Ma,Haijuan Wu

DOI: https://doi.org/10.1039/c9ra08832f

IF: 4.036

2020-01-01

RSC Advances

Abstract:This paper presents a green friendly method for preparing dual temperature- and pH-responsive electrospun P(NIPAAm-co-AAc)/RSF fibrous mats for drug release.

What problem does this paper attempt to address?

Development of Random and Ordered Composite Fiber Hybrid Technologies for Controlled Release Functions

Baolin Wang,Zeeshan Ahmad,Jie Huang,Jing-Song Li,Ming-Wei Chang

DOI: https://doi.org/10.1016/j.cej.2018.03.021

IF: 15.1

2018-01-01

Chemical Engineering Journal

Abstract:Fibrous technologies (such as membranes, films, patches and filters) and their enabling engineering platforms have gained considerable interest over the last decade. In this study, novel fibrous constructs from a unique engineering platform were developed based on hybrid electrohydrodynamic (EHD) technology; incorporating functional and bioactive materials within random and aligned fibrous formulation geometries. Complex constructs were engineered using 3D printing (polycaprolactone, PCL, for sustained delivery) and electrospinning (polyvinylpyrrolidone, PVP, for rapid release) in an intercalating material layer-by-layer format using a side-by-side technological approach. Here, structure generation proceeded with deposition of ordered PCL fibers enabling well-defined void size and overall dimension, after which randomly spun PVP fibers formed a construct overcoat (as a membrane). Differences between polymer dissolution rate, hydrophilicity, mechanical properties and functional material hosting (and linked external auxiliary magnetic field trigger) provided opportunities to modulate antibiotic drug (tetracycline hydrochloride, TE-HCl) release. In vitro cell studies using human umbilical vein blood vessel cell line demonstrated device biocompatibility and Escherichia Coli (E. coli) was selected to demonstrate anti-bacterial function. Overall, a new hybrid engineering platform to prepare customizable and exciting multi-faceted drug release constructs is elucidated.
Preparation and performance characterization of electrospun drug loaded poly (vinyl alcohol)/chitosan nanofibrous membrane

Yani ZHANG,Shanwei WU,Jiayao XU,Wei CHEN,Yuanyuan LV

DOI: https://doi.org/10.3785/j.issn.1008-9292.2013.06.009

2013-01-01

Abstract:To prepare nanofibrous membranes of poly (vinyl alcohol)/chitosan (PVA/CS) loaded with varied salvianic acid A sodium (SAS) contents.Ultrafine fiber mats were prepared with PVA/CS as matrix and SAS as model drug. The structure and morphology of the nanofibrous membranes were characterized by FT-IR and SEM. Drug-loading amount and drug release profiles of these membranes were determined by UV VIS spectra, and the degradation of the membranes was also investigated.Average diameters of PVA/CS/SAS nanofibers with different SAS contents were 280 ≊390 nm. Drug-loading amount of these nanofibrous membranes was high and exhibited sustained and controlled release behavior for SAS.The PVA/CS/SAS nanofibrous membrane prepared in this study loads drug uniformly and has remarkably sustained release behavior, which may offer strategies for the research and development of novel topical drug delivery systems.
Preparation and properties of thermoresponsive acrylonitrile-based copolymer nanofibrous membranes

LingShu Wan

DOI: https://doi.org/10.1360/032010-681

2011-01-01

Abstract:Diblock copolymers of acrylonitrile and N-isopropylacrylamide(NIPAM) were synthesized by reversible addition-fragmentation chain transfer polymerization and the molecular weight distribution was found to be around 1.3.Nanofibrous membranes were prepared from the resultant copolymers by electrospinning.Optimized conditions for the electrospinning were established.FESEM images elucidate that the nanofibers are uniform.Water contact angles on the copolymer membranes show distinct transition upon temperature,which is around 20 ℃.This decreased transition temperature can be attributed to the introduction of a relatively hydrophobic polyacrylonitrile block.Bovine serum albumin adsorptions at different temperatures also confirm the thermoresponsive properties of the membranes,i.e.at lower temperature the fiber surface is more hydrophilic,which is protein-resistant.This thermoresponsive nanofibrious membrane show great potential in intelligent separation.
Dual Temperature and Ph Responsive Nanofiber Formulations Prepared by Electrospinning

Heyu Li,Kailin Liu,Gareth R. Williams,Junzi Wu,Jianrong Wu,Haijun Wang,Shiwei Niu,Li-Min Zhu

DOI: https://doi.org/10.1016/j.colsurfb.2018.07.020

IF: 5.999

2018-01-01

Colloids and Surfaces B Biointerfaces

Abstract:We report a dual-responsive drug delivery system prepared by electrospinning. Blend fibers of poly(N-vinylcaprolactam) (PNVCL) and ethyl cellulose (EC) were first prepared, with the aim of developing thermoresponsive sustained release formulations. Eudragit L100-based fibers were then generated to yield pH-sensitive materials. Attempts to produce three-polymer fibers of EC, PNVCL and Eudragit were unsuccessful, and therefore hybrid mats containing two fiber populations (one made of PNVCL/EC, one comprising Eudragit) were instead fabricated by twin-jet electrospinning. Analogous drug-loaded versions of all the formulations were also prepared containing ketoprofen (KET). The fibers were largely smooth and homogeneous, and the addition of KET did not affect their morphology. The PNVCL-containing fiber mats changed from being hydrophilic to hydrophobic when the temperature was increased through the lower critical solution temperature of 33 degrees C. In vitro drug release profiles showed that the hybrid fiber mats were able to combine the properties of the three polymers, exhibiting both pH-sensitive and thermosensidve properties with sustained release. in addition, they were found to be nontoxic and suitable for cell growth, This study therefore demonstrates that PNVCL/EC/KET-Eudragit/KET multicomponent fiber mats comprise effective and biocompatible materials for targeted drug delivery.
Electrospun pH responsive poly (acrylic acid-co- acrylamide) hydrogel nanofibrous mats for drug delivery

Preeti Gupta,Roli Purwar

DOI: https://doi.org/10.1007/s10965-020-02236-9

IF: 3.061

2020-09-05

Journal of Polymer Research

Abstract:In the present study hydrogel nanofibrous mats are prepared through electrospinning of poly (acrylamide-co-acrylic acid) dope solution having polyethylene glycol as cross-linker. The electrospun mats are heat treated at 150 °C to induce esterification crosslinking reaction. The mats are characterized for their structural, morphological and thermal behaviour. The average diameter of hydrogel nanofibers is found to be 275 ± 94.5 nm. The swelling behaviour of nanofibrous mats is evaluated in the phosphate buffer solutions of different pHs in the range of 2 to 8.5 and is found to be highest at neutral pH. The nanofibrous mats are loaded with amoxicillin drug for antimicrobial activity and drug release behaviour. The drug loaded mats form a clear inhibition zone with both Gram-positive bacteria S. aureus and Gram-negative bacteria E. coli in disc diffusion test. Drug is released at all the pHs (2 to 8.5) and maximum release is observed at neutral pH. The kinetics of drug release follows Fickian diffusion (n < 0.5) at tested pH.

polymer science
Thermoresponsive Poly ( N ‐Isopropylacrylamide)/Polycaprolacton Nanofibrous Scaffolds for Controlled Release of Antibiotics

Karim Arroub,Isabel Gessner,Thomas Fischer,Sanjay Mathur

DOI: https://doi.org/10.1002/adem.202100221

IF: 3.6

2021-06-23

Advanced Engineering Materials

Abstract:Smart antibacterial materials capable of releasing antibiotic drugs upon exposure to external trigger are highly desired for various medical applications. We report here on the fabrication of thermo‐sensitive drug loaded core‐shell nanofibers using electrospinning technique combined with in situ UV photopolymerization. Electrospinning method was used for shaping the core structure comprising of biodegradable polymer polycaprolactone (PCL). The PCL fibers were coated with the temperature‐responsive poly‐N‐isopropylacrylamide (PNIPAM) via a UV photopolymerization process that allowed to precisely control the shell thickness as verified by transmission electron microscope (TEM) analysis. The temperature‐dependent switchable wettability of prepared core‐shell fibers was investigated and visualized though water contact angle measurements below and above the lower critical solution temperature. Loading of the antibiotic drug doxycycline hyclate (Doxy) in the PCL core nanofibers resulted in drug encapsulating fiber meshes that allowed diffusion of drug molecules through the PNIPAM shell in a temperature‐dependent manner. The antibacterial activity was examined using Gram‐negative Escherichia coli (E. coli) as well as Gram‐positive Staphylococcus aureus (S. aureus) bacteria. The results demonstrated the high suitability of prepared biocompatible electrospun core‐shell PCL/PNIPAM nanofibers as carrier for antibiotic drugs with temperature‐sensitive release behavior.This article is protected by copyright. All rights reserved.

materials science, multidisciplinary
Ph-Responsive Nanofiber Membranes for Superior Controlled Release of Poorly Water-Soluble Drug and Its Release Mechanism Study

Changmi Wu,Haotian Ren,Yanan Zhang,Danfeng Jian,Yujie Gao,Jindan Wu

DOI: https://doi.org/10.1016/j.colcom.2023.100750

IF: 5.633

2023-01-01

Colloid and Interface Science Communications

Abstract:Antibiotics delivery using dressings is an effective manner to treat chronic infected wounds, but it still faces the challenge of uncontrolled drug release. To address this issue, we developed pH-responsive electrospun nanofibers for controlled release of poorly water-soluble antibiotics. Specifically, the drug-loaded electrospun nanofibers were fabricated via coaxial electrospinning technique, with polycaprolactone (PCL) and drug acting as the core and pH-responsive acrylic copolymer Eudragit L100–55 serving as the sheath layer. Under alkaline conditions, all drugs release rapidly due to the dissolution of Eudragit L100–55, and first-order model well fits the release behavior. In contrast, the sheath layer swells under acidic conditions, causing poorly water-soluble drugs to be firmly trapped. Moreover, the drug-loaded nanofibers display completely different antibacterial activities due to distinct drug release behaviors under alkaline or acidic conditions. The current pH-responsive nanofibers shows superior controllability of poorly water-soluble drug release, revealing great prospects for treating chronic infected wounds.
A Thermosensitive Drug Delivery System Prepared by Blend Electrospinning

Heyu Li,Qingqing Sang,Junzi Wu,Gareth R. Williams,Haijun Wang,Shiwei Niu,Jianrong Wu,Li-Min Zhu

DOI: https://doi.org/10.1016/j.ijpharm.2018.03.009

IF: 6.51

2018-01-01

International Journal of Pharmaceutics

Abstract:To prepare temperature and pH dual-responsive drug delivery systems, the thermosensitive polymer poly(N-isopropylacrylamide) (PNIPAAm) was first synthesized by free-radical polymerization. It was then co-dissolved with the pH-sensitive polymer Eudragit® L100-55 (EL100-55) and processed into fibers using electrospinning. Ketoprofen (KET), a model drug, was also incorporated into the composite fibers, and fibers based on a single polymer additionally prepared. The fibers had smooth cylindrical morphologies, and no obvious phase separation could be seen. Using X-ray diffraction, KET was determined to be present in the amorphous state in the fiber matrix. FTIR spectroscopy also indicated the successful incorporation of amorphous KET in the fibers. In vitro drug release studies in media at different pH (4.5 or 7.4) or temperature (25 and 37 °C) showed that the release of KET from the blend PNIPAAm/EL100-55 fibers was dependent both on environmental temperature and pH, reflecting the dual-responsive properties of the fibers. The MTT assay was used to explore the biocompatibility of the PNIPAAm/EL100-55 composite fibers towards L929 fibroblasts. Viability was always found to be >80%, even at polymer concentrations of 100 mg/L. Therefore, the fibers prepared here could lead to the development of multi-responsive materials for drug delivery and tissue engineering.
Electrospinning of Biomacromolecules for Controlled Drug Release

LU Yao,JIANG Hong-Liang,ZHU Kang-Jie

DOI: https://doi.org/10.3969/j.issn.0258-8021.2008.06.023

2008-01-01

Abstract:Within the past few years electrospinning has been paid much attention due to the increasing interests of the researchers in the nanotechnology and the unique properties of the nanomaterials. This review focused on the electrospinning behaviors of biomacromolecules including synthetic biomedical polymers, natural-occurring biopolymer and the composite nanofibrous membranes. The electrospinning parameters of the biomacromolecules and the properties of the electrospun membranes such as the morphological stability, mechanical properties and degradation behavior were discussed in details. In addition, the application of the electrospun membranes for controlled drug release was also included. The incorporation method and the release behavior of the drugs were discussed and summarized, according to the solubility of the drugs.
Alginate-Based Electrospun Nanofibers and the Enabled Drug Controlled Release Profiles: A Review

Zhiyuan Zhang,Hui Liu,Deng-Guang Yu,Sim-Wan Annie Bligh

DOI: https://doi.org/10.3390/biom14070789

IF: 6.064

2024-07-03

Biomolecules

Abstract:Alginate is a natural polymer with good biocompatible properties and is a potential polymeric material for the sustainable development and replacement of petroleum derivatives. However, the non-spinnability of pure alginate solutions has hindered the expansion of alginate applications. With the continuous development of electrospinning technology, synthetic polymers, such as PEO and PVA, are used as co-spinning agents to increase the spinnability of alginate. Moreover, the coaxial, parallel Janus, tertiary and other diverse and novel electrospun fiber structures prepared by multi-fluid electrospinning have found a new breakthrough for the problem of poor spinning of natural polymers. Meanwhile, the diverse electrospun fiber structures effectively achieve multiple release modes of drugs. The powerful combination of alginate and electrostatic spinning is widely used in many biomedical fields, such as tissue engineering, regenerative engineering, bioscaffolds, and drug delivery, and the research fever continues to climb. This is particularly true for the controlled delivery aspect of drugs. This review provides a brief overview of alginate, introduces new advances in electrostatic spinning, and highlights the research progress of alginate-based electrospun nanofibers in achieving various controlled release modes, such as pulsed release, sustained release, biphasic release, responsive release, and targeted release.
Microfluidic Preparation of pH-Responsive Microsphere Fibers and Their Controlled Drug Release Properties

Ning Wang,Yixuan Wei,Yanrong Hu,Xiaoting Sun,Xiaohong Wang

DOI: https://doi.org/10.3390/molecules29010193

IF: 4.6

2023-12-29

Molecules

Abstract:In this study, a capillary microfluidic device was constructed, and sodium alginate solution and a pH-sensitive hydrophobic polymer (p(BMA-co-DAMA-co-MMA)) solution were introduced into the device for the preparation of hydrogel fibers loaded with polymer microspheres. The structure of the microsphere fiber, including the size and spacing of the microspheres, could be controlled by flow rate, and the microspheres were able to degrade and release cargo responding to acidic pH conditions. By modification with carboxymethylcellulose (CMC), alginate hydrogel exhibited enhanced pH sensitivity (shrunk in acidic while swollen in basic condition). This led to an impact on the diffusion rate of the molecules released from the inner microspheres. The microsphere fiber showed dramatic and negligible degradation and drug release in tumor cell (i.e. A431 and A549 cells) and normal cell environments, respectively. These results indicated that the microsphere fiber prepared in this study showed selective drug release in acidic environments, such as tumor and inflammation sites, which could be applied as a smart surgical dressing with normal tissue protective properties.

chemistry, multidisciplinary,biochemistry & molecular biology
Intelligent temperature-pH dual responsive nanocellulose hydrogels and the application of drug release towards 5-fluorouracil

Yuan Li,Lu Zhang,Zhaoping Song,Fayong Li,Dong Xie

DOI: https://doi.org/10.1016/j.ijbiomac.2022.10.188

IF: 8.2

2022-11-06

International Journal of Biological Macromolecules

Abstract:As the typical bio-macromolecules, cellulose and its derivates are widely studied due to the fact that they are green and renewable resources in nature. In this work, intelligent temperature-pH sensitive nanohydrogels consisting of nanocellulose, thermal responsive monomer (N-isopropylacrylamide, NIPAM), and pH responsive monomer (acrylic acid, AA; acrylamide, AM) were prepared [NFC-g-(AA/AM)]-g-NIPAM, the [NFC-g-(AA/AM)]-g-NIPAM was characterized by FTIR, scanning electron microscope (SEM), thermogravimetric analysis (TGA) and automatic gas adsorption analysis (BET). The results showed that the copolymerization of AA, AM and NIPAM were carried out successfully. The specific surface area, total pore volume, average pore diameter and thermal stability of the modified nano-cellulose were increased. In addition, the as-prepared nanohydrogels with 5-fluorouracil (5-FU) released more 5-FU at 40 °C and acidic condition compared to the room temperature and neutral pH, showing the characteristics of the temperature-PH dual response functionalization. The [NFC-g-(AA/AM)]-g-NIPAM have been proved to be the promising drug release nanohydrogels towards 5-FU, and the valuable findings might provide an idea for maximizing the potential of the nanocellulose-based nanohydrogels for the application of environmental pollution control.

polymer science,biochemistry & molecular biology,chemistry, applied
Spontaneous bacterial arthritis in a cirrhotic patient.

R. Marinho,J. Monteiro,I. Tavora,F. Ramalho,M. D. de Moura

DOI: https://doi.org/10.1016/S0168-8278(01)00268-9

IF: 25.7

2002-03-01

Journal of Hepatology

Abstract:
Synthesis and Properties of pH-, Thermo-, and Salt-Sensitive Modified Poly(aspartic acid)/Poly(vinyl alcohol) IPN Hydrogel and Its Drug Controlled Release

Jingqiong Lu,Yinhui Li,Deng Hu,Xiaoling Chen,Yongmei Liu,Liping Wang,Yansheng Zhao

DOI: https://doi.org/10.1155/2015/236745

Abstract:Modified poly(aspartic acid)/poly(vinyl alcohol) interpenetrating polymer network (KPAsp/PVA IPN) hydrogel for drug controlled release was synthesized by a simple one-step method in aqueous system using poly(aspartic acid) grafting 3-aminopropyltriethoxysilane (KH-550) and poly(vinyl alcohol) (PVA) as materials. The hydrogel surface morphology and composition were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The thermal stability was analyzed by thermogravimetric analysis (TGA). The swelling properties and pH, temperature, and salt sensitivities of KPAsp, KPAsp/PVA semi-interpenetrating polymer network (semi-IPN), and KPAsp/PVA IPN hydrogels were also investigated. All of the three hydrogels showed ampholytic pH-responsive properties, and swelling behavior was also extremely sensitive to the temperature, ionic strength, and cationic species. Finally, the drug controlled release properties of the three hydrogels were evaluated and results indicated that three hydrogels could control drug release by external surroundings stimuli. The drug controlled release properties of KPAsp/PVA IPN hydrogel are the most outstanding, and the correlative measured release profiles of salicylic acid at 37°C were 32.6 wt% at pH = 1.2 (simulated gastric fluid) and 62.5 wt% at pH = 7.4 (simulated intestinal fluid), respectively. These results indicated that KPAsp/PVA IPN hydrogels are a promising carrier system for controlled drug delivery.
Synthesis & Characterizations of a pH/temperature-dual responsive hydrogel with promising biocompatibility features for stimuli-responsive 5-FU delivery.

Purusottyam Suryavanshi,Shriram Mahajan,Sanjay K Banerjee,Kapileswar Seth,Subham Banerjee

DOI: https://doi.org/10.1039/d4tb00168k

IF: 7.571

2024-04-20

Journal of Materials Chemistry B

Abstract:The tunable properties of stimuli-responsive copolymer or hydrogel encourage their application in different fields such as biomedical engineering, tissue engineering, or even drug release. Here we introduce a new class of PNIPAM-based triblock copolymer material comprising a controlled amount of novel hydrophobic crosslinker 2,4'-diacryloyloxy benzophenone (DABP) and acrylic acid (AAc) to achieve lower critical solution temperature (LCST) in between ambient to body temperature. The dual stimuli-responsive P(NIPAM-co-DABP-co-AAc) triblock copolymer material and hydrogels were synthesized, and their temperature and pH-responsive behavior were systematically investigated. The hydrogel exhibited an excellent temperature and pH-responsive property with LCST around 30 o C. Moreover, the synthesized copolymer has been demonstrated to be nontoxic both in vitro and in vivo. When the hydrogels were preloaded with the model drug 5-fluorouracil (5-FU), the designed hydrogels released the drug in a temperature and pH-controlled fashion. It was observed that the prepared hydrogels have the ability to entrap 5-FU, and the loading is more than 85 %. In the case of temperature-controlled release, we observed almost complete release of 5-FU at lower temperatures and sustained release behavior at higher temperatures. In addition, the hydrogel matrix was able to retard the release of 5-FU in an acidic environment and selectively released in a basic environment. By realizing how the hydrogel properties influence the release of drugs from preloaded hydrogels. It is possible to design new materials with myriad applications in the drug delivery field.

materials science, biomaterials
Regulation of haem biosynthesis in normoblastic erythropoiesis: role of 5-aminolaevulinic acid synthase and ferrochelatase.

T. Houston,M. Moore,K. McColl,E. Fitzsimons

DOI: https://doi.org/10.1016/0304-4165(94)90155-4

1994-09-28

Biochimica et Biophysica Acta

Abstract:
Synthesis and characterization of pH and temperature sensitive hydrogel based on poly(N-isopropylacrylamide), poly(ɛ-caprolactone), methylacrylic acid, and methoxyl poly(ethylene glycol)

Xu Xu,Jia Song,Ke Wang,YingChun Gu,Feng Luo,XiaoHai Tang,Ping Xie,ZhiYong Qian

DOI: https://doi.org/10.1007/s13233-013-1098-2

IF: 2.127

2013-02-23

Macromolecular Research

Abstract:In this paper, a novel biodegradable and pH/thermo-sensitive hydrogel based on poly(ɛ-caprolactone), methoxyl poly(ethylene glycol), methylacrylic acid and N-isopropylacrylamide was prepared by UV-initiated free radical polymerization. The hydrogels were characterized by Fourier transforms infrared ray. The thermal responsibility was investigated with the help of differential scanning calorimetry. Swelling behavior in aqueous medium with different pH value was studied in detail. When the pH value of the aqueous medium was increased from 1.2 to 7.2, the swelling ratio of the hydrogels increased accordingly. The morphology was observed by scanning electron microscopy, and the hydrolytic degradation behavior in different aqueous media (pH 1.2 and pH 7.2) was also investigated in detail. The prepared biodegradable pH/thermo-sensitive hydrogel based on poly(ɛ-caprolactone), methoxyl poly(ethylene glycol), methylacrylic acid and N-isopropylacrylamide hold great promise in the development of a smart drug delivery system.

polymer science
Synthesis and characterization of pH- and temperature-sensitive materials based on alginate and poly(N-isopropylacrylamide/acrylic acid) for drug delivery

Nuran Işıklan,Gülcan Küçükbalcı

DOI: https://doi.org/10.1007/s00289-015-1550-x

IF: 2.843

2015-11-07

Polymer Bulletin

Abstract:The significant developments in the field of polymer have advanced the synthesis of polymer-based materials and have expanded their use in a wide variety of applications. Today, polymers can be designed to change their properties in response to a single stimulus or multiple stimuli. Such types of polymers are called stimuli-sensitive or stimuli-responsive polymers, and have been utilized for controlled release in the field of biomedicine. Herein, we report the use of alginate (SA) based graft copolymer with poly(N-isopropylacrylamide) (PIPAAm) and poly(acrylic acid) (PAA) to synthesize dual stimuli-sensitive beads via microwave-assisted graft copolymerization method for controlled release of indomethacin (IND). It is demonstrated that the polymer beads composed of SA-g-PIPAAm/PAA are sensitive to pH and temperature. The structure of successfully prepared stimuli-sensitive beads by cross-linking via glutaraldehyde is characterized by FTIR, X-RD and SEM analysis.

polymer science
Assembly of Environmental Sensitive Microcapsules of PNIPAAm and Alginate Acid and Their Application in Drug Release.

Anhe Wang,Cheng Tao,Yue Cui,Li Duan,Yang,Junbai Li

DOI: https://doi.org/10.1016/j.jcis.2008.12.032

IF: 9.9

2009-01-01

Journal of Colloid and Interface Science

Abstract:The objective of this research was to fabricate stable and environmentally sensitive (PNIPAAm/ALG)(n) microcapsules via layer-by-layer (LbL) technique. The structure, thermosensitive and pH-sensitive properties of the microcapsules were characterized by transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM), individually. MnCO(3) microparticles and melamine formaldehyde (MF) microparticles were used as templates separately. The microcapsules from MnCO(3) cores were stable over a large pH range with thermosensitive and pH-sensitive properties, while those from MF particles were unstable in basic solutions. To the end, ALG and PNIPAAm were adsorbed on recrystallized taxol alternatively, which obviously prolonged the release time of taxol above lower crystal solution temperature (LCST) of PNIPAAm.
Preparation of Drug-loaded Electrospun Fibrous Mats by Electrospinning

LI Mei,HAN Gao-yi,ZHAO Liang-qi,ZHANG Li-wei

DOI: https://doi.org/10.3321/j.issn:1001-2494.2009.06.010

2009-01-01

Abstract:OBJECTIVE To prepare eelectrospun polyhydroxylbutyrate fibrous mats containing ciprofloxacin by electrospinning. METHODS The surface morphology of the electrospun fibrous mats was investigated by scanning electron microscope. In vitro bacteriostasis function was investigated with the determination of inhibition zone diameters on agar plate and the bacterial inhibition percentage by the absorbance at 625 nm in UV-VIS spectroscopy. RESULTS The uniform fibers without beads were acquired by increasing the applied voltage,poly-hydroxylbutyrate concentration,molecular weight and drug concentration. The CPX-PHB fibrous mats were effective to inhibit S. aureus growth in both a static (agar) and a dynamic (liquid) enviroment. CONCLUSION It is clear that the CPX-PHB electrospun scaffolds hold a future potential to prevent post-surgical adhesions and infections. And electrospinning is a simple and stable method to prepare CPX-PHB electrospun fibrous mats.

Aqueous-based electrospun P(NIPAAm-<i>co</i>-AAc)/RSF medicated fibrous mats for dual temperature- and pH-responsive drug controlled release

Development of Random and Ordered Composite Fiber Hybrid Technologies for Controlled Release Functions

Preparation and performance characterization of electrospun drug loaded poly (vinyl alcohol)/chitosan nanofibrous membrane

Preparation and properties of thermoresponsive acrylonitrile-based copolymer nanofibrous membranes

Dual Temperature and Ph Responsive Nanofiber Formulations Prepared by Electrospinning

Electrospun pH responsive poly (acrylic acid-co- acrylamide) hydrogel nanofibrous mats for drug delivery

Thermoresponsive Poly ( N ‐Isopropylacrylamide)/Polycaprolacton Nanofibrous Scaffolds for Controlled Release of Antibiotics

Ph-Responsive Nanofiber Membranes for Superior Controlled Release of Poorly Water-Soluble Drug and Its Release Mechanism Study

A Thermosensitive Drug Delivery System Prepared by Blend Electrospinning

Electrospinning of Biomacromolecules for Controlled Drug Release

Alginate-Based Electrospun Nanofibers and the Enabled Drug Controlled Release Profiles: A Review

Microfluidic Preparation of pH-Responsive Microsphere Fibers and Their Controlled Drug Release Properties

Intelligent temperature-pH dual responsive nanocellulose hydrogels and the application of drug release towards 5-fluorouracil

Spontaneous bacterial arthritis in a cirrhotic patient.

Synthesis and Properties of pH-, Thermo-, and Salt-Sensitive Modified Poly(aspartic acid)/Poly(vinyl alcohol) IPN Hydrogel and Its Drug Controlled Release

Synthesis & Characterizations of a pH/temperature-dual responsive hydrogel with promising biocompatibility features for stimuli-responsive 5-FU delivery.

Regulation of haem biosynthesis in normoblastic erythropoiesis: role of 5-aminolaevulinic acid synthase and ferrochelatase.

Synthesis and characterization of pH and temperature sensitive hydrogel based on poly(N-isopropylacrylamide), poly(ɛ-caprolactone), methylacrylic acid, and methoxyl poly(ethylene glycol)

Synthesis and characterization of pH- and temperature-sensitive materials based on alginate and poly(N-isopropylacrylamide/acrylic acid) for drug delivery

Assembly of Environmental Sensitive Microcapsules of PNIPAAm and Alginate Acid and Their Application in Drug Release.

Preparation of Drug-loaded Electrospun Fibrous Mats by Electrospinning