Analysis Of Impact Of Sintering Temperature On Microstructure Of Lscf-Sdc Composite Cathodes Using Nano-Ct
Yong Guan,Xin Pan,Gang Liu,Zhiting Liang,Shan Chen,Xiaobo Zhang,Ying Xiong,Yangchao Tian,Changrong Xia
DOI: https://doi.org/10.1117/12.2026149
2013-01-01
Abstract:Composites of La0.4Sr0.6Co0.8Fe0.2O3-d (LSCF) with samarium doped ceria (SDC) have been extensively used as cathodes for solid oxide fuel cells (SOFCs) to lower its operation temperature. The ability to visualize three-dimensional (3D) microstructural changes in LSCF-SDC composite cathodes can help elucidate the impact of microstructure on cathode performance. This study reports that we utilize the nano-computed tomography (nano-CT) technique to image the 3D microstructures of La0.4Sr0.6Co0.2Fe0.8O3 (LSCF) - Ce0.8Sm0.2O1.9 (SDC) composite cathodes which were sintering at 800, 1000, and 1200oC, respectively, for 2 h based on the Fe K-absorption edge. Using the reconstructions of LSFC-SDC composite cathodes submitted to different temperatures, the key microstructural properties, such as volume fraction of each phase, connected volume fraction, surface area, triple-phase boundary length, and pore size were measured. The effect of sintering temperature on the microstructure of LSFC-SDC cathodes was discussed and compared with theoretical simulation. With increasing sintering temperature in the range from 800 to 1200oC LSFC-SDC composite cathode microstructure was found that the volume fraction and grain size of LSCF material increased, while the volume fraction of SDC decreased. Furthermore, the triple-phase boundary length per volume increased as the sintering temperature increasing. This study had revealed that the nano-CT can provide a powerful tool to investigate the 3D microstructure of energy materials and optimize its preparation condition to gain better functional performance. Keywords: Sintering temperature; Composite cathode; LSCF-SDC; Nano-CT.