Abstract:A coordinate transformation for a finite difference method using a fully staggered curvilinear grid is applied to solve the incompressible Navier–Stokes equation with a direct numerical method. Without turbulence models, backward facing step simulations are performed with Reynolds numbers ranging from 1.5 × 104 to 3.7 × 104. From a time-averaged result, it is shown that the mainstream velocity rapidly decreases, and downward momentum increases near the end of the recirculating vortex region because of a drastic change of the effective cross-sectional area from the time-averaged flow. The turbulent fluctuation and Reynolds stress are intensified near the end of the recirculating vortex, in which the results show reasonable agreements with the experiment. The Reynolds-averaged Navier–Stokes (RANS) turbulence model and large eddy simulation (LES) are also performed using OpenFOAM. Although the RANS model could not produce the turbulent fluctuations, the time-averaged velocity profile shows a reasonable agreement with the experiment. For the LES, the viscosity near the boundary layer is overestimated due to the sub-grid scale eddy viscosity, thus it could not resolve the boundary layer correctly which leads different trend of velocity profile compared to the experiment. Turbulent anisotropic behaviors are also studied with the turbulent anisotropic invariant map. From the result, it is confirmed that turbulent anisotropic behaviors show different characteristics depending on the location of the backward-facing step, and the anisotropic behavior which is close to the isotropic is only observed in the two-separated narrow regions after the step where the gradient of the root mean square magnitude of velocity fluctuation is starting to increase.

Research on the Effects of Nonsmooth Surfaces on Backward-facing Step Flow

Review of Backward-Facing Step Flow and Separation Reduction

Investigating The Flow Control Over A Backward-Facing Step By Right-Angle-Shaped Plasma Actuator

Lattice Boltzmann Modeling of Backward-Facing Step Flow Controlled by a Synthetic Jet

POD Analysis of Flow over a Backward-Facing Step Forced by Right-Angle-shaped Plasma Actuator

Investigation of the Coherent Structures in Flow Behind a Backward-Facing Step

Experimental Investigation on the Turbulent Separated and Reattaching Flow over Backward-Facing Step

Effects of Backward-Facing Step Shape on Hypersonic Flow Characteristics

Turbulent Flows over a Backward Facing Step Simulated Using a Modified Partially Averaged Navier–Stokes Model

Visualisation on Supersonic Flow over Backward-Facing Step with or Without Roughness

Direct numerical simulation for backward-facing step flow with turbulence anisotropy analysis in a fully staggered curvilinear grid

Flow boiling heat transfer and associated bubble behaviors over backward- and forward-facing steps

Numerical Study of Active Flow Control over a Hypersonic Backward-Facing Step Using Supersonic Jet in Near Space

Continuum Simulation of the Microscale Backward-Facing Step Flow in A Transition Regime

Effects of Inflow Mach Number and Step Height on Supersonic Flows over a Backward-Facing Step

Control of Shock-Wave/boundary-layer Interaction Using Abackward-Facing Step

Study on the Law of Pseudo-Cavitation on Superhydrophobic Surface in Turbulent Flow Field of Backward-Facing Step

Numerical study on the flow control mechanisms of an off-surface circular cylinder for wall-bounded flows with separation

Experimental Investigation on Surface Heat Transfer Characteristics of Hypersonic Two-Dimensional Rearward-Facing Step Flow

Interaction of a Backward-Facing Step and Crossflow Instabilities in Boundary-Layer Transition

Numerical Simulation of Separated and Reattached Flows Around a Backward-Facing Step