Abstract:The cement industry has brought serious environmental pollution problems. In the background of ecological civilization, accelerating rational use of waste resources plays an important role in protecting the environment. In this study, self-compacting concrete (SCC) is prepared using fly ash and lime powder as supplementary cementitious materials by replacing 50%, 60%, and 70% of ordinary Portland cement. By systematically analyzing the influence of the fly ash replacement rate on the workability and mechanical properties of SCC, steel-fiber-reinforced SCC containing 60% fly ash is chosen for further study, and steel fiber is added at the percentages of 0.25%, 0.50%, 0.75%, and 1.00%. The performances in fresh and hardened states are investigated in terms of workability, compressive strength, splitting tensile strength, flexural strength, and axial compression deformation property. The obtained outcomes indicate that although the incorporation of fly ash can improve the workability of the mixture, there is a negative correlation between the mechanical properties of SCC and the fly ash replacement rate. For steel-fiber-reinforced SCC containing 60% fly ash, when the content of steel fibers exceeds 0.75%, the workability decreases sharply, and even when the volume fraction is 1.00%, the passing ability cannot meet the requirements of the technical specifications for applications of self-compacting concrete. The analysis results for mechanical properties show that compressive strength is not changed significantly with increasing percentage of steel fibers. The steel fibers strengthen splitting tensile strength and flexural strength significantly, and compared with that of without steel fibers, they increased by 22% and 58%, respectively, with steel fibers up to 1.00%. Additionally, the parameters of the axial compression deformation property are improved by introducing steel fibers, especially the strain energy (Vε) and relative toughness (Γ) of steel-fiber-reinforced SCC containing a high level of fly ash.

The Influence of Fly Ash on the Bending Characteristics of Cost-Effective Cementitious Composites

Mechanical Properties Of High-Volume Fly Ash Strain Hardening Cementitious Composite (Hvfa-Shcc) For Structural Application

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Influence of Fly Ash on the Mechanical Properties of Engineered Cementitious Composites Cured at High Temperature

Mechanical Properties of Engineered Cementitious Composites with High Volume Fly Ash

Bending behavior of strain hardening cementitious composites based on the combined fiber-interface constitutive model

The Effect of Fly Ash Content on Flexural Performance and Fiber Failure Mechanism of Lightweight Deflection-Hardening Cementitious Composites

PREPARATION AND PROPERTIES OF HIGH DUCTILITY CEMENTITIOUS COMPOSITES WITH HIGH CONTENT OF FLY-ASH

Study on Fine-Toned Fly Ash Content for Lightweight Strain-Hardening Cementitious Composites (LSHCC) with Low Fiber Content

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Use of Slag to Improve Mechanical Properties of Engineered Cementitious Composites (eccs) with High Volumes of Fly Ash

Experimental Study on the Properties and Shear Toughness of Strain-Hardening Cementitious Composite of the Combined Use of Polypropylene Fiber and Clinoptilolite

Study on Bond Performance, Flexural and Crack Extension Behavior of Base Concrete Prisms Strengthen with Strain-Hardening Cementitious Composites (SHCC) Using DIC Technology

Hydration mechanism and mechanical properties of a developed low-carbon and lightweight strain-hardening cementitious composites

The Effect of High Content of Fly Ash on the Properties of Glass Fiber Reinforced Cementitious Composites

Mechanical Properties and Axial Compression Deformation Property of Steel Fiber Reinforced Self-Compacting Concrete Containing High Level Fly Ash

Electrical and Mechanical Properties of Self-Sensing SHCC

Modeling of Effect of Fly Ash Amount on Microstructure and Chloride Diffusivity of Blended Fly Ash-Cement Systems

Impact Properties of Engineered Cementitious Composites with High Volume Fly Ash Using SHPB Test

Ductility Variation and Improvement of Strain-Hardening Cementitious Composites in Structural Utilization

Experimental Investigation and Numerical Model for Chloride Diffusivity of Long-Age Fly Ash Cement Slurry