Abstract:The oxidation of cyclohexane in the microchannels not only improves the safety of the reaction, but also the performance of the oxidation reaction. Different gas-liquid micro mixers were used for the mixing of gas and liquid before entering into microchannels, and SIMM-V2 performed best of all. Excellent slug/plug flow can be formed in the microchannels after mixing in the gas-liquid micro mixer when the molar ratio of oxygen to cyclohexane is less than 0.5:1. The conversion of cyclohexane increased as the residence time increased, but the selectivity of cyclohexanol and cyclohexanone increased first and then decreased. At the reaction temperature of 200 °C, with the flow rate of the solvent isopropanol being 1 mL/min and the molar ratio of oxygen to cyclohexane being 0.15:1, both the conversion of cyclohexane and selectivity of cyclohexanol and cyclohexanone increased with the increase of pressure. The conversion of cyclohexane and selectivity of cyclohexanol and cyclohexanone reached 10.10% and 66.93% respectively at the pressure of 8 MPa. It is indicated that the new process by use of uncatalyzed cyclohexane oxidation in the microchannels will have very attractive prospects in the improvement of the safety, intensification of the gas-liquid mass transfer and obtaining good reactive performance. Therefore, the technology shows good potential in industrial applications.

Process Intensification in Catalytic Wet Air Oxidation of Phenol Via Coupling Gas‐liquid Microdispersion with Trickle Bed Reactors

Modeling of a Pilot-Scale Trickle Bed Reactor for the Catalytic Oxidation of Phenol

Uncatalyzed Oxidation of Cyclohexane in the Microchannels

Effect of Gas-Liquid Mass Transfer on P-Xylene Oxidation

Research on the Design and Application of Efficient Catalysts Based on Interfacial Chemistry: Molecular Catalysts in Gas-Liquid Mixed Systems

Energy Optimization of Wet Air Oxidation Reactors with Sub-Millimeter Bubble Intensification

Catalytic wet air oxidation of phenol over CeO2-TiO2 catalyst in the batch reactor and the packed-bed reactor

Catalytic wet oxidation of phenol in a trickle bed reactor over a Pt/TiO2 catalyst

Cumene autooxidation to cumene hydroperoxide based on a gas-liquid microdispersion strategy

Catalytic Wet Air Oxidation of Phenol with Functionalized Carbon Materials As Catalysts: Reaction Mechanism and Pathway

Process Intensification Of Catalytic Hydrogenation Of Ethylanthraquinone With Gas-Liquid Microdispersion

Liquid-phase oxidation of cyclohexane with air in a microreactor: Kinetics and process intensification

Process intensification of H2O2 extraction using gas–liquid–liquid microdispersion system

Phenolic compounds removal by wet air oxidation based processes

Catalytic Wet Air Oxidation of Phenol with Ru/ZrO2-CeO2 Catalyst

Catalytic Wet Air Oxidation of Phenols over Porous Plate Cu-based Catalysts

Catalytic Wet Air Oxidation of Phenol, Nitrobenzene and Aniline over the Multi-Walled Carbon Nanotubes (mwcnts) As Catalysts

Multi-walled carbon nanotubes (MWNTs) as an efficient catalyst for catalytic wet air oxidation of phenol

Mechanistic insights and catalytic enhancement of phenolic wastewater supercritical water gasification: A combined experiment and density functional theory study

Gas-Liquid-Solid interface enhanced photocatalytic reaction in a microfluidic reactor for water treatment

Intensification of Catalytic Oxidation with a T-junction Microchannel Reactor for Deep Desulfurization