Abstract:By combining inorganic hydrated salt phase change materials (PCMs) with traditional building materials, new multifunctional building materials are prepared, which can achieve energy optimization of building envelope structures and improve indoor thermal comfort. This study chose disodium hydrogen phosphate dodecahydrate (DHPD) as PCM and 4 % Na 2 SiO 3 ·9H 2 O as the nucleating agent to prepare a modified PCM with extremely low supercooling degree (0.3 °C). Then, the modified PCM was introduced into 45 % diatomite to gain a composite PCM (CPCM) with a melting temperature of 30.4 °C, a melting enthalpy of 130.1 J/g, and a thermal conductivity of 0.24 W m −1 K −1 by melt mixing method, being suitable for building insulation. The corrosion test of steel bar showed the introduction of diatomite can solve the corrosion problem of reinforcing steel bar by DHPD. The results of SEM, pore structure analysis, FT-IR and XRD illustrated that the pores and disc surfaces of diatomite were almost covered by the modified PCM, and that were combination between the diatomite and PCM was a physical interaction. After 200 cold-heating cycles, the melting temperature change of the CPCM was less than 3 % with the loss of melting enthalpy of only 4.7 %, indicating its good thermal stability. In addition, the CPCM was filled into polycarbonate hollow panels to produce PCM board, and its temperature regulation performance was evaluated through two experimental rooms. The results showed that the thermal comfort time of the room equipped with PCM board accounted for 47.46 %, which was 40.09 % higher than that of (7.37 %) the one without PCM board, presenting a better building energy-saving effect. Therefore, the prepared CPCM has broad application prospect in the building energy conservation.

Preparation and Thermal Performance of Diatomite-Based Composite Phase Change Materials Wallboard

Experimental study on the performance of an active novel vertical partition thermal storage wallboard based on composite phase change material with porous silica and microencapsulation

Study on the heat transfer of a concrete wall outfitted with phase change materials

Study on optimization of thermal property parameters of phase change wallboard and its application simulation in the building

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Parametric analysis of influencing factors in Phase Change Material Wallboard (PCMW)

Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves

Characteristics optimization of composite phase-change wall during intermittent heating process

Design of Na2HPO4·12H2O/diatomite composite phase change materials with low supercooling degree, excellent thermal properties and corrosion resistance for building energy conservation

Study on Preparation of Montmorillonite-Based Composite Phase Change Materials and Their Applications in Thermal Storage Building Materials

Characteristics, energy saving and carbon emission reduction potential of gypsum wallboard containing phase change material

Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard

Energy, Economic and Environmental (3E) Analysis of Residential Building Walls Enhanced with Phase Change Materials

Numerical Study on the Effect of Incorporating Phase Change Materials in a Wall

Thermal Performance Assessment of Concrete Walls Using Different Phase Change Materials

Study on the performance of phase change energy storing gypsum boards

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones

Experimental study of breathable and heterogeneous phase change material (B&H-PCM) wall for all-season thermal performance enhancement

The Reduction Of Indoor Temperature Fluctuation By Using Phase Change Materials Incorporated Inside Some Building Walls

Characterization of paraffin/ultrasonic-treated diatomite for use as phase change material in thermal energy storage of buildings

Experimental assessment of concrete masonry units integrated with insulation and phase change material: A wall-pattern study