Abstract:Fused deposition modelling (FDM) is a well-known additive manufacturing technique, which can transfer digital three-dimensional (3D) models into functional components directly. Despite many advantages FDM can offer, poor surface accuracy of fabricated objects has always been a big issue that attracts increasing attention. To study the influence on the surface profiles imposed by various process parameters effectively as well as quantitatively, the mathematical model of the surface profile need to be developed. In this work, a new surface profile model is developed to characterize the surface profile of FDM fabricated parts. The process parameters are classified into two groups (i.e. pre-process parameters and fabrication process parameters) to investigate the impacts on surface characterization. Corresponding experiments are conducted using an FDM machine to make comparison with the predicted values and to validate the reliability and effectiveness of the proposed surface models. Both the experimental results and theoretical values indicate that the surface accuracy of the top surface is mainly determined by the ratio between molten paste flowrate and the nozzle feedrate under specified layer thickness and path spacing. On the other hand, the surface quality of the side surface is primarily affected by the layer thickness and the stratification angle of the surface. At the same time, some optimization approaches for the surface improvement are presented: appropriate ratio between paste flowrate and fabrication speed are required for desirable top surface and thinner layer thickness can, to some extent, alleviate the staircase effect out of the slicing procedure and the stratification angle of the side surface should be confined to a range to avoid large geometric errors.

Predicting Surface Roughness of Microcellular Foam Injection Parts Molded by PC/N2 System

Surface Morphology Analysis of Microcellular Foam Injection Parts Molded Using the PP/N2 System

Research progress of improving surface quality of microcellular foam injection parts

An Analytical Model for Pressure Distribution in Automated Fiber Placement on Irregular Surfaces and Its Application in Aeronautical Manufacturing

Microcellular Foam Injection Molding Surface Improvement Methods

Relationship Between Nucleation Process of Microcellular Foam Injection Molding and Cell Morphology

OPTIMUM DESIGN OF PROCESS PARAMETERS IN MICROCELLULAR FOAM INJECTION MOLDING

A Design of Experiment Approach for Surface Roughness Comparisons of Foam Injection-Moulding Methods

A Study on the Effects of Process Parameters on Swirl Marks of Microcellular Injection Molded PC Parts

Response Surface Optimization for Producing Microcellular Polymethyl Methacrylate Foam Using Supercritical Co2

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

Microcellular injection molding of foamed engineering plastic parts with high dimensional accuracy

Effect of Gas Counter Pressure on the Surface Roughness, Morphology, and Tensile Strength between Microcellular and Conventional Injection-Molded PP Parts

The Impact of Surface Roughness on Conformal Cooling Channels for Injection Molding

Surface Features of Polymer and Ceramic Microstructured Parts Manufactured by Micro Injection Molding

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Study on the definition, mechanism and controllability of secondary bubbles based on the bubble nucleation model in injection foaming polypropylene

Experiment and Simulation of Foaming Injection Molding of Polypropylene/nano-Calcium Carbonate Composites by Supercritical Carbon Dioxide

Analysis of the Effects on the Quality of Micro Injection Molded Products

Cavity Filling Analysis of Injection Molding Simulation:The Formation of Bubble and Weld Line

Surface Roughness Prediction of Parts Produced Through Fusion Deposition Modelling