Abstract:[Abstract] Coupled aerodynamic and structural optimization is performed for the preliminary design of a high-subsonic transport-aircraft wing using surrogate models. The aerodynamic performance of wing/body combination in transonic flow is calculated with full-potential equation in conjunction with viscous correction method. Structural analysis is performed using finite-element method (FEM) to obtain stress and deform distribution. The span, taper ratio, sweep angle and linear twist angle are chosen as design variables that define the aerodynamic configuration of the wing. And another four representing thicknesses of spars and skin are selected as the design variables for structural discipline. After the aeroelastic analysis of the various candidate wings, the aerodynamic and structural performances are obtained such as the lift coefficient, the drag coefficient, and the deformation and equivalent stress of the wing. Based on these sample data, the approximation models for analyzing the aerodynamic and structural performances are established using surrogate models including quadratic response surface method (RSM), kriging model (KM) and radial-basis function (RBF) Network. The modeling accuracy is evaluated by numerical-error analysis. We aim to select the approximation models with best accuracy to replace the complicated and time-consuming analysis in optimization. It is found that KM and RSM has comparative high accuracy and both are more accurate than RBF. Multi-objective optimization for the supercritical wing is performed based on RSM, for maximizing lift-to-drag ratio and minimizing weight. And the optimization is constrained by lift, reference area, deform, equivalent stress. The performance of the optimal design is proven to be improved based on the initial design. And compared with the optimal design without considering aeroelastic effect, lift-to-drag ratio is increased by 5.77% and lift is increased by 19.55%. It is proven by practice that considering aeroelastic effect is necessary in priliminary design of aircraft when optimizing high-aspect-ratio wing.

Aero-Structural Optimization of a Supersonic Wing Model Using Adjoint-Based Optimization Algorithm

Aero-structural Optimization of Supersonic Wing under Thermal Environment Using Adjoint-Based Optimization Algorithm

Aerodynamic Design Optimization by Using a Continuous Adjoint Method

Three-Dimensional Aerodynamic Design Optimization of A Turbine Blade by Using an Adjoint Method

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Optimum Aerodynamic Design of Transonic Wing Based on Adjoint Equations Method

Inverse Design for Wing of Multi-point Aerodynamic Based on Adjoint Method

Aerodynamic Shape Optimization of a Transonic Fan by an Adjoint-Response Surface Method

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Optimum Aerodynamic Design of Transonic Wing Based on Viscous Adjoint Method

Wing Design by Solving Adjoint Equations

Aerodynamic Optimization Design of Supersonic Wing Based on Discrete Adjoint

An Aerodynamic Shape Optimization of Transonic Wing Design Method for Aeroelastic System

Adjoint-based airfoil optimization with adaptive isogeometric discontinuous Galerkin method

Multi-point Aerodynamic Optimization Design Strategy of Rotor Airfoil With Multi-constrain Conditions

Aerodynamic Optimization Design of the Supersonic Aircraft Based on Discrete Adjoint Method

Application of Mesh Adjoint in Airfoil Optimization

Aerodynamic-structure Multidisciplinary Optimization Design of Wing Based on Response Surface Methodology

Aerodynamic optimization utilizing control theory

Stress Sensitivity Analysis for a Wide-Chord Fan Blade Using an Adjoint Method

Coupled Aerodynamic/Structural Optimization of a Subsonic Transport Wing Using a Surrogate Model