Abstract:Plant breeding programs and a wide range of plant science applications would greatly benefit from the development of in-field high throughput phenotyping technologies. In this study, a terrestrial LiDAR-based high throughput phenotyping system was developed. A 2D LiDAR was applied to scan plants from overhead in the field, and an RTK-GPS was used to provide spatial coordinates. Precise 3D models of scanned plants were reconstructed based on the LiDAR and RTK-GPS data. The ground plane of the 3D model was separated by RANSAC algorithm and a Euclidean clustering algorithm was applied to remove noise generated by weeds. After that, clean 3D surface models of cotton plants were obtained, from which three plot-level morphologic traits including canopy height, projected canopy area, and plant volume were derived. Canopy height ranging from 85th percentile to the maximum height were computed based on the histogram of the z coordinate for all measured points; projected canopy area was derived by projecting all points on a ground plane; and a Trapezoidal rule based algorithm was proposed to estimate plant volume. Results of validation experiments showed good agreement between LiDAR measurements and manual measurements for maximum canopy height, projected canopy area, and plant volume, with R2-values of 0.97, 0.97, and 0.98, respectively. The developed system was used to scan the whole field repeatedly over the period from 43 to 109 days after planting. Growth trends and growth rate curves for all three derived morphologic traits were established over the monitoring period for each cultivar. Overall, four different cultivars showed similar growth trends and growth rate patterns. Each cultivar continued to grow until ~88 days after planting, and from then on varied little. However, the actual values were cultivar specific. Correlation analysis between morphologic traits and final yield was conducted over the monitoring period. When considering each cultivar individually, the three traits showed the best correlations with final yield during the period between around 67 and 109 days after planting, with maximum R2-values of up to 0.84, 0.88, and 0.85, respectively. The developed system demonstrated relatively high throughput data collection and analysis.

Experimental Study on Measuring the Internal Porosity of Plant Canopy by Laser Distance Measuring

CMPC: An Innovative Lidar-Based Method to Estimate Tree Canopy Meshing-Profile Volumes for Orchard Target-Oriented Spray

Using Airborne Lidar to Retrieve Crop Structural Parameters

In-field High Throughput Phenotyping and Cotton Plant Growth Analysis Using LiDAR

Mechanical Analysis of Rice Canopy Using Explicit Dynamics and Practical Applications of Canopy Opener

Method for Estimating Canopy Thickness Using Ultrasonic Sensor Technology

Dynamic stratified porosity computation from canopy interaction simulation between airflow and leaves

Computational model of pesticide deposition distribution on canopies for air-assisted spraying

Three-Dimensional Structure Measurement for Potted Plant Based on Millimeter-Wave Radar

Canopy Volume Measurement of Fruit Trees Using Robotic Platform Loaded LiDAR Data

Development of a 3D point cloud reconstruction-based apple canopy liquid sedimentation model

Research on Estimating Rice Canopy Height and LAI Based on LiDAR Data

Study of the Distribution Characteristics of the Airflow Field in Tree Canopies Based on the CFD Model

Sensitivity Analysis of Canopy Structural and Radiative Transfer Parameters to Reconstructed Maize Structures Based on Terrestrial LiDAR Data

Automated methods for measuring DBH and tree heights with a commercial scanning lidar

Canopy Parameter Estimation of Citrus grandis var. Longanyou Based on LiDAR 3D Point Clouds

Multifactorial analysis and experiments affecting the effect of fog droplet penetration in fruit tree canopies

Pesticide Uptake and Translocation in Plants Monitored in situ via Laser Ablation Dielectric Barrier Discharge Ionization Mass Spectrometry Imaging

Estimation of FPAR and FPAR Profile for Maize Canopies Using Airborne LiDAR

Cotton canopy airflow simulation and velocity attenuation model based upon 3D phenotype and stratified sub-regional porous medium

Evaluation of the deposition and distribution of spray droplets in citrus orchards by plant protection drones