Abstract:Finite element analysis reveals stress transfer from external fixators to tibial bone during fracture healing. Key stress‐sensitive points identified in the fixator can non‐invasively monitor healing progress, potentially reducing reliance on traditional diagnostic tools. Background Although the specific relationship between the stress changes in the external fixator during tibial fracture treatment and the bone healing process remains unclear, it is believed that stress variations in the external fixator scaffold can, to a certain extent, reflect the progress of tibial healing. Objective This study aims to propose a non‐invasive method for assessing the degree of fracture healing by monitoring the changes in stress transmission, the locations of stress‐sensitive points, and displacement in the external fixator‐tibia system during the healing process of tibial fractures. Methods In this study, finite element models of tibial fractures at various healing stages were developed. Physiological conditions, including axial, torsional, and bending loads on the tibia, were simulated to evaluate stress and strain within the external scaffold‐tibia system under normal physiological loading conditions. Results The results indicate variations in the stress distribution between the external fixator and the tibia during different stages of healing. In the early phase of fracture healing, the external fixator plays a crucial role as the primary load‐bearing unit under all three loading conditions. As the fracture healing progresses, the stress on the tibia gradually increases, concentrating on the medial part of the tibia under axial and torsional loading, and at the upper and lower ends, as well as the central part of the anterior and posterior tibia during bending loading. The stress at the callus gradually increases, while micro‐movements decrease. The stress within the external bracket gradually decreases, with a tendency for the connecting rod to transfer stress towards the screws. Throughout the fracture healing process, the location of maximum stress in the external fixator remains unchanged. Under axial and torsional loading, the maximum stress is located at the intersection of the lowest screw and the bone cortex, while under bending loading, it is at the intersection of the second screw and the connecting rod. Conclusion During the bone healing process, stress is transferred between the external fixation frame and the bone. As bone healing advances, the stress on the connecting rods and screws of the external fixation frame decreases, and the amplitude of stress changes diminishes. When complete and robust fusion is achieved, stress variations stabilize, and the location of maximum stress on the external fixation frame remains unchanged. The intersections of the lowest screw and the bone cortex, as well as the second screw and the connecting rod, can serve as sensitive points for monitoring the degree of bone healing.

Investigate of the Influence of Pin Deviation on the Biomechanical Environment of Fixator-Bone System by Finite Element Method

The Influence of Pin Deviation on the Fracture Correction and the Fixator Adjustment with Sensitivity and Kinematic Analysis

A Theoretical Analysis and Finite Element Simulation of Fixator–bone System Stiffness on Healing Progression

Numerical investigation of the relationship between pin deviations and joint coordinates of a unilateral external fixator

A finite element analysis for monitoring the healing progression of fixator-bone system under three loading conditions.

Investigation of Load Transfer Process Between External Fixator and Bone Model by Experimental and Finite Element Methods.

A Trial of Measuring the Displacement of Tibial Fragments with Pinless External Fixator

Influence of Parameter Deviation on the Closeness of the Tibial Limb and External Fixator Based on a Novel Collision Detection Algorithm

How Does the Stress in the Fixation Device Change during Different Stages of Bone Healing in the Treatment of Fractures? A Finite Element Study of External Fixation for Tibial Fractures

Research on Biomechanical Application of Fracture Reduction Fixator Based on Finite Element Analysis

Stiffness of a New Unilateral External Fixator – a Biomechanical Study

Finite Element and Biomechanical Analysis of Risk Factors for Implant Failure During Tension Band Plating.

The dynamization of LCP: finite element analysis of micromovement and stress in fracture site

Computational analysis of the biomechanical stability of internal fixation of the lateral tibial plateau fracture: A mechanical stability study

Biomechanical analysis of fracture fixation with external fixator in vivo.

Three-dimensional finite element analysis of the biomechanical characteristics of micro-implant and the bone tissue

Biomechanics of external fixator of distal radius fracture, a new approach: Mutifix Wrist

Biomechanical analysis of internal fixation system stability for tibial plateau fractures

Biomechanical analysis of tibial fracture fixed by three fixation devices

Stress Distribution on the Mandibular Condyle and the Distraction Area in Distraction Osteogenesis by Finite Element Analysis

Finite element analysis of biomechanical stability of new and traditional type atlas pedicle screw