Fabrication of a visible-light In2S3/BiPO4 heterojunction with enhanced photocatalytic activity

Menghan Zhang,Zhiqiang Hou,Wei Ma,Xiaoxu Zhao,Changchang Ma,Zhi Zhu,Yongsheng Yan,Chunxiang Li

DOI: https://doi.org/10.1039/c8nj03284j

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:The construction of a heterojunction is an effective way to improve the photocatalytic activity of a semiconductor.

What problem does this paper attempt to address?

Fabrication of a Visible-Light In2S3/BiPO4 Heterojunction with Enhanced Photocatalytic Activity

Menghan Zhang,Zhiqiang Hou,Wei Ma,Xiaoxu Zhao,Changchang Ma,Zhi Zhu,Yongsheng Yan,Chunxiang Li

DOI: https://doi.org/10.1039/c8nj03284j

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:The construction of a heterojunction is an effective way to improve the photocatalytic activity of a semiconductor. In this study, to improve the photocatalytic activity of BiPO4 in visible light and the quantum yield of In2S3, a novel In2S3/BiPO4 heterojunction photocatalyst was successfully synthesized via a solvothermal method. XRD and TEM characterizations reveal that In2S3 was irregularly loaded on the surface of BiPO4, leading to good dispersion of In2S3, greatly improving the catalyst active site. Meanwhile, In2S3 also greatly improves the visible light absorption of BiPO4. An ESR spin-trap technique and trapping experiments on active species indicate that O-2(-) and h(+) are the main activated species during the photodegradation process. Finally, the as-obtained In2S3/BiPO4 heterojunction exhibits higher photocatalytic activity than those of pure In2S3 and BiPO4 for the photodegradation of rhodamine B (RhB) and tetracycline (TC). This work provides a promising way to photodegrade organic materials to reduce water pollution.
BiOBr–carbon Nitride Heterojunctions: Synthesis, Enhanced Activity and Photocatalytic Mechanism

Jie Fu,Yanlong Tian,Binbin Chang,Fengna Xi,Xiaoping Dong

DOI: https://doi.org/10.1039/c2jm34778d

2012-01-01

Journal of Materials Chemistry

Abstract:The high recombination rate of photogenerated charges is the main problem that limits the photocatalytic activity of semiconductor photocatalysts. Herein, we have reported novel heterojunctions of BiOBr–carbon nitride (BiOBr–C3N4) fabricated by depositing BiOBr nanoflakes onto the surface of C3N4. These visible light responsive heterojunctions possess intimately contacted interfaces and well-aligned straddling band-structures, which are propitious to the effective separation and transfer of photogenerated charges, bringing an improved performance. Their photocatalytic activities were evaluated by degrading Rhodamine B in aqueous solution induced by visible or indoor light. The optimum photocatalytic activity of the 0.5BiOBr–0.5C3N4 heterojunction was almost 4.9 and 17.2 times as high as those of individual BiOBr and C3N4 under visible light irradiation, and 1.5 and 48.9 times as high under indoor light irradiation, respectively. Moreover, its activity was also much higher than those of TiO2 (P25), BiOBr–TiO2, and C3N4–TiO2 heterojunctions. On the basis of experimental and theoretical results, the photocatalytic mechanism was proposed, which revealed that organic molecules were mainly oxidized by holes concentrated in the valence band of C3N4. Our work highlights that the design of heterojunctions with well-aligned straddling band-structures by combining two visible light responsive semiconductors provides an efficient method to prepare new photocatalysts working with natural light.
Fabrication of Multiple Heterojunctions with Tunable Visible-Light-active Photocatalytic Reactivity in BiOBr-BiOI Full-Range Composites Based on Microstructure Modulation and Band Structures.

Hongwei Huang,Xu Han,Xiaowei Li,Shichao Wang,Paul K. Chu,Yihe Zhang

DOI: https://doi.org/10.1021/am5065409

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:The fabrication of multiple heterojunctions with tunable photocatalytic reactivity in full-range BiOBr-BiOI composites based on microstructure modulation and band structures is demonstrated. The multiple heterojunctions are constructed by precipitation at room temperature and characterized systematically. Photocatalytic experiments indicate that there are two types of heterostructures with distinct photocatalytic mechanisms, both of which can greatly enhance the visible-light photocatalytic performance for the decomposition of organic pollutants and generation of photocurrent. The large separation and inhibited recombination of electron-hole pairs rendered by the heterostructures are confirmed by electrochemical impedance spectra (EIS) and photoluminescence (PL). Reactive species trapping, nitroblue tetrazolium (NBT, detection agent of (•)O2(-)) transformation, and terephthalic acid photoluminescence (TA-PL) experiments verify the charge-transfer mechanism derived from the two types of heterostructures, as well as different enhancements of the photocatalytic activity. This article provides insights into heterostructure photocatalysis and describes a novel way to design and fabricate high-performance semiconductor composites.
Bi2O2(OH)NO3/AgI Heterojunction with Enhanced UV and Visible-Light Responsive Photocatalytic Activity and Mechanism Investigation

Mengyue Zhou,Haoxin Shi,Hongwei Huang,Fang Chen,Yitao Li,Ke Wang,Yihe Zhang

DOI: https://doi.org/10.1016/j.materresbull.2018.08.039

IF: 5.6

2018-01-01

Materials Research Bulletin

Abstract:Fabricating heterojunction between a wide-band-gap semiconductor and a narrow-band-gap semiconductor has become an important strategy to simultaneously improve the photoabsorption and charge separation. In this work, a new heterojunction photocatalyst Bi2O2(OH)NO3/AgI was prepared through a facile in-situ crystallization method under ambient atmosphere. The crystal morphology, surface structure and element distribution were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) mapping and X-ray photoelectron spectroscopy (XPS). Compared with the pristine Bi2O2(OH)NO3 and AgI, Bi2O2(OH)NO3/AgI shows much enhanced degradation performance for eliminating MO regardless of UV or visible light. Photocurrent, electrochemical impedance spectra (EIS) and photoluminescence (PL) demonstrated that the enhanced photocatalytic activity is ascribed to the greatly promoted charge separation and transfer resulted from the matchable band energy levels of Bi2O2(OH)NO3 and AgI, favoring the formation of heterojunction. In addition, according to the active species trapping experiment, the main active species are superoxide radicals (O-.(2)-) and holes (h(+)) during the degradation process.
In Situ Co-Crystallization for Fabrication of G-C3n4/bi5o7i Heterojunction for Enhanced Visible-Light Photocatalysis

Chengyin Liu,Hongwei Huang,Xin Du,Tierui Zhang,Na Tian,Yuxi Guo,Yihe Zhang

DOI: https://doi.org/10.1021/acs.jpcc.5b03707

2015-01-01

Abstract:We developed for the first tithe an in situ co-crystallization route for fabrication of a heterojunctional photocatalyst g-C3N4/Bi5O7I by adopting melamine and BiOI as coprecursors. This synthetic Method enables intimate interfacial interaction with chemical bonding between g-C3N4 and Bi5O7I, which is beneficial for charge transfer at the interface. The photocatalysis properties of g-C3N4/Bi5O7I composites were studied by photodegradation of Rhodarnine B (RhB) and phenol and generation of transient photocurrent with illumination of visible-light (lambda > 420 nm), The results revealed that the g-C3N4/Bi5O7I composite shows enhanced photocatalytic reactivity compared to the pristine g-C3N4 and Bi5O7I samples. Investigations on the behaviors of charge carriers via electrochemical impedance spectra (EIS) and photoluminescence (PL) spectra suggests that the g-C3N4/Bi5O7I heterojunctional structure constructed of the in situ cothermolysis approach is responsible for the efficient separation and transfer of photogenerated electrons (e(-)) and holes (h(+)), thus giving rise to the higher photocatalytic activity. The present work opens a new avenue for manipulation of high-performance semiconductor heterojunction for photocatalytic and photoelectrochemical application.
Fabrication of Z-scheme MoO3/Bi2O4 heterojunction photocatalyst with enhanced photocatalytic performance under visible light irradiation

Tiangui Jiang,Kai Wang,Ting Guo,Xiaoyong Wu,Gaoke Zhang

DOI: https://doi.org/10.1016/S1872-2067(19)63391-7

IF: 16.5

2020-01-01

Chinese Journal of Catalysis

Abstract:Constructing Z-scheme heterojunction to improve the separation efficiency of photogenerated carriers of photocatalysts has gained extensive attention. In this work, we fabricated a novel Z-scheme MoO3/Bi2O4 heterojunction photocatalyst by a hydrothermal method. XPS analysis results indicated that strong interaction between MoO3 and Bi2O4 is generated, which contributes to charge transfer and separation of the photogenerated carriers. This was confirmed by photoluminescence (PL) and electrochemical impedance spectroscopy (EIS) tests. The photocatalytic performance of the as-synthesized photocatalysts was evaluated by degrading rhodamine B (RhB) in aqueous solution under visible light irradiation, showing that 15% MoO3/Bi2O4 (15-MB) composite exhibited the highest photocatalytic activity, which is 2 times higher than that of Bi2O4. Besides, the heterojunction photocatalyst can keep good photocatalytic activity and stability after five recycles. Trapping experiments demonstrated that the dominant active radicals in photocatalytic reactions are superoxide radical (•O2−) and holes (h+), indicating that the 15-MB composite is a Z-scheme photocatalyst. Finally, the mechanism of the Z-scheme MoO3/Bi2O4 composite for photo-degrading RhB in aqueous solution is proposed. This work provides a promising strategy for designing Bi-based Z-scheme heterojunction photocatalysts for highly efficient removal of environmental pollutants.

chemistry, physical,engineering, chemical, applied
Fabrication of a Β-Bi2o3/bioi Heterojunction and Its Efficient Photocatalysis for Organic Dye Removal

Suiqi Han,Jia Li,Kailun Yang,Jun Lin

DOI: https://doi.org/10.1016/s1872-2067(15)60974-3

IF: 16.5

2015-01-01

Chinese Journal of Catalysis

Abstract:To improve β-Bi2O3 photocatalysis, we couple β-Bi2O3 with BiOI to form β-Bi2O3/BiOI heterojunctions through an in-situ treatment with hydriodic acid. The prepared heterojunctions are characterized with X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, ultra violet-diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. Upon visible-light irradiation (λ > 420 nm), the β-Bi2O3/BiOI heterojunctions, especially with the molar ratio of HI to β-Bi2O3 at 0.4, exhibit much higher photocatalytic activity than pure β-Bi2O3 and BiOI for the degradation of methyl orange. The efficient separation of photogenerated electron-hole pairs across the interface of the heterojunction between β-Bi2O3 and BiOI would be responsible for the enhanced photocatalytic performances.
Constructing a Novel Bi2SiO5/BiPO4 Heterostructure with Extended Light Response Range and Enhanced Photocatalytic Performance

Di Liu,Weibin Cai,Yonggang Wang,Yongfa Zhu

DOI: https://doi.org/10.1016/j.apcatb.2018.05.022

2018-01-01

Abstract:To further extend the light response range of BiPO4 and meanwhile keep its strong photocatalytic oxidation ability, the design of a type-II heterojunction by coupling BiPO4 with a narrower band gap semiconductor of Bi2SiO5 as a novel and efficient photocatalytic catalyst has been successfully realized through a simple co-precipitate method. Moreover, under 365 nm UV light irradiation, pure BiPO4 shows no photo-activity, whereas the optimal Bi2SiO5/BiPO4 heterostructure exhibits highly enhanced photocatalytic activity than pure Bi2SiO5 in systems of photo-degradation over phenol and MB, which is 4.36 times and 1.13 times the values of pure Bi2SiO5. Experimental results reveal that the superior photocatalytic performance can be attributed to the synergetic effect of the evidently improved charge separation ability via the heterojunction, good crystallinity, expanded light absorbance and the moderate BET specific surface area.
Fabrication of Novel G-C3n4@bi/bi2o2co3 Z-Scheme Heterojunction with Meliorated Light Absorption and Efficient Charge Separation for Superior Photocatalytic Performance.

Hongxia Fan,Xiaohui Ma,Xinyang Li,Li Yang,Yongzhong Bian,Wenjun Li

DOI: https://doi.org/10.3390/molecules27238336

2022-01-01

Abstract:Herein, a novel g-C3N4@Bi/Bi2O2CO3 Z-scheme heterojunction was synthesized via simple methods. UV/Vis diffuse reflectance spectroscopy (DRS) revealed that the visible light absorption range of heterojunction composites was broadened from 400 nm to 500 nm compared to bare Bi2O2CO3. The XRD, XPS and TEM results demonstrated that metal Bi was introduced into g-C3N4@Bi/Bi2O2CO3 composites, and Bi may act as an electronic bridge in the heterojunction. Metal Bi elevated the separation efficiency of carriers, which was demonstrated by photocurrent and photoluminescence. The performance of samples was assessed via the degradation of Rhodamine B (RhB), and the results exhibited that g-C3N4@Bi/Bi2O2CO3 possessed notably boosted photocatalytic activity compared with g-C3N4, Bi2O2CO3 and other binary composites. The heterojunction photocatalysts possessed good photostability and recyclability in triplicate cycling tests. Radical trapping studies identified that h+ and •O2− were two primary active species during the degradation reaction. Based on the energy band position and trapping radical experiments, the possible reaction mechanism of the indirect Z-scheme heterojunction was also proposed. This work could provide an effective reference to design and establish a heterojunction for improving the photocatalytic activity of Bi2O2CO3.
Construction of a novel Ca2Bi2O5/α-Bi2O3 semiconductor heterojunction for enhanced visible photocatalytic application

Xiaohui Ji,Qin Wang,Jiu-Fu Lu,Dan Zhang

DOI: https://doi.org/10.1016/j.ceramint.2020.02.149

IF: 5.532

2020-01-01

Ceramics International

Abstract:Bi3+-containing compounds have been intensively investigated for their potential application as photocatalysts for degrading pollutants and splitting water. In this work, a Ca2Bi2O5/α-Bi2O3 heterojunction photocatalyst was successfully prepared via the facile sol–gel method. The excess of the initial Bi raw material can result in the Ca2Bi2O5/α-Bi2O3 heterojunction of the final products. The as-synthesized nanoparticles were investigated via X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy-dispersive spectrometry, UV–Vis optical absorption, and X-ray photoelectron spectroscopy. The band energy of the Ca2Bi2O5 substrate semiconductor was 2.49 eV and characterized with a direct transition nature. The photocatalytic effect on the photodegradation of Rhodamine B solutions was evaluated. Ca2Bi2O5/α-Bi2O3 heterojunctions showed improved photocatalytic abilities compared with single Ca2Bi2O5 and α-Bi2O3 under viable light irradiation. The mechanism was discussed in terms of the microstructure, luminescence intensities, and decay curves (lifetimes). The photo-produced electrons and holes can be adequately separated in Ca2Bi2O5/α-Bi2O3 heterojunctions ensuring its photocatalytic activities. The present results can serve as reference for investigating the optical properties of Bi semiconductors.
In Situ Co-Precipitation for the Synthesis of an Ag/Agbr/Bi5o7i Heterojunction for Enhanced Visible-Light Photocatalysis

Zhihao Zhao,Meng Wang,Tianzi Yang,Minghao Fang,Lina Zhang,Hekai Zhu,Chao Tang,Zhaohui Huang

DOI: https://doi.org/10.1016/j.molcata.2016.08.004

2016-01-01

Abstract:An Ag/AgBr/Bi5O7I heterojunction was developed using a simple in situ co-precipitation method. Ag/AgBr nanoparticles were tightly bound to Bi5O7I, improving charge transfer at the heterojunction interface. The photocatalytic activities of the Ag/AgBr/Bi5O7I composites were studied by monitoring the photodegradation of Rhodamine B (RhB) and through the generation of a transient photocurrent under visible-light irradiation (lambda > 420 nm). The Ag/AgBr/Bi5O7I composites displayed enhanced photocatalytic activities compared to either pure Ag/AgBr or Bi5O7I. Charge carrier behavior was investigated using electrochemical impedance spectroscopy (EIS) which indicated the enhanced separation and transfer of photogenerated electrons and holes, thus giving to the higher photocatalytic activity. The high-performance semiconductor heterojunction developed in this work is a good candidate for photocatalytic application. (C) 2016 Elsevier B.V. All rights reserved.
Fabrication and efficient visible light-induced photocatalytic activity of Bi 2WO 6/BiVO 4 heterojunction

Xiufang Zhang,Yan Gong,Xiaoli Dong,Xinxin Zhang,Chun Ma,Fei Shi

DOI: https://doi.org/10.1016/j.matchemphys.2012.07.013

IF: 4.778

2012-01-01

Materials Chemistry and Physics

Abstract:The Bi2WO6/BiVO4 photocatalyst with heterojunction structure was synthesized. X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images indicated that Bi2WO6 nanoplate was loaded on the BiVO4 surface. UV–vis diffusion absorption spectra (DRS) displayed no obvious difference between the band gap absorption edges of the BiVO4 and Bi2WO6/BiVO4. It was found that the phenol degradation rate with Bi2WO6/BiVO4 was 2.55 times as great as that with the BiVO4 under visible light (λ > 400 nm) by the photocatalytic measurements. The enhanced photocatalytic performance of the Bi2WO6/BiVO4 sample was attributed to the improved separation efficiency of photogenerated hole–electron pairs generated by the heterojunction between Bi2WO6 and BiVO4.
Rationally designed Sb2S3/PDI composites with enhanced visible light photoactivity

Jin-Ge Hao,Hui-Qi Chen,Lei Xie,Ze-Xiang Li,Jia-Lin Zhang,Wei-Ya Huang,Tao Deng,Kang-Qiang Lu,Kai Yang

DOI: https://doi.org/10.1016/j.catcom.2021.106368

IF: 3.51

2022-02-01

Catalysis Communications

Abstract:Constructing organic-inorganic semiconductor heterojunctions is an efficient way to inhibit the recombination of photogenerated charge carriers and enhance photocatalytic performance of semiconductor. Herein, a novel heterojunction antimony sulfide-perylene diimides (Sb2S3-PDI) heterojunction has been fabricated through a facile hydrothermal method. Compared with bare Sb2S3 and PDI, the Sb2S3-PDI hybrid has showed significantly superior activity in photocatalytic reduction of Cr (VI). The superior photocatalytic performance of Sb2S3-PDI hybrid is due to the formation of type-I heterojunction, which leads to a more efficient separation and migration of photogenerated electron-hole pairs. This work is expected to promote continued interest in the construction of organic-inorganic semiconductor composites with enhanced photocatalytic performance.

chemistry, physical
Fabrication Of N-Tio2/Inbo3 Heterostructures With Enhanced Visible Photocatalytic Performance

Yanlong Yu,Yue Tang,Jixiang Yuan,Qiang Wu,Wenjun Zheng,Yaan Cao

DOI: https://doi.org/10.1021/jp412375z

2014-01-01

Abstract:A new type of heterostructured photocatalysts (N-TiO2/InBO3) were synthesized by coupling nitrogen-modified TiO2 (N-TiO2) with indium borate (InBO3) via a one-step sol-gel method. It was revealed that N-TiO2/InBO3 exhibited an improved photocatalytic performance compared with TiO2, N-TiO2, and InBO3 under both UV and visible light irradiation because of the formation of a heterostructure at the interface as well as the introduction of surface NOx species and InBO3. These results may provide a paradigm to fabricate and design the optoelectronic functional materials with high efficiency and performance.
In Situ Fabrication of Bi2WO6/MoS2/RGO Heterojunction with Nanosized Interfacial Contact via Confined Space Effect toward Enhanced Photocatalytic Properties

Congmin Zhang,Gang Chen,Chunmei Li,Jingxue Sun,Chade Lv,Weinan Xing

DOI: https://doi.org/10.1021/acssuschemeng.6b00640

IF: 8.4

2016-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Heterojunction photocatalysts with nanosized interfacial contact possess excellent photocatalytic performance due to special natures such as shortening carriers transfer distance and expanding interfacial contact areas. Herein, the heterostructured interface with nanosized contact areas on Bi2WO6/MoS2/RGO (BMG) is obtained successfully. Bi2WO6 nanocrystals are anchored on MoS2/RGO (MG) substrate in a ternary composite. The confined space effect of MG two-dimensional material restricts the growth of Bi2WO6, which endows a heterojunction with nanosized interfacial contact. This kind of nanoscale heterojunction promotes interfacial carriers transfer and separation, leading to significantly enhanced photocatalytic performance of as-fabricated BMG compared to pure Bi2WO6. The present work provides a new understanding into design and fabrication of a novel heterojunction photocatalyst with nanosized interfacial contact by confined space effect.
Fabrication of hierarchical hollow BiOBr@ZnIn 2 S 4 heterojunction to enhance the visible-light-driven photodegradation of dyes

Mei Cai,Bin Du,Anze Shui,Chao He

DOI: https://doi.org/10.1016/j.apsusc.2022.155807

IF: 6.7

2022-12-09

Applied Surface Science

Abstract:The photodegradation of pollutants is a significant and friendly technology to protect the environment. The fabrication of hierarchical heterojunction is the efficient method to improve the photocatalytic performance. Herein, the hierarchical type-II 2 S 4 heterojunction is fabricated successfully via a simple chemistry method. The optimal sample BS170 (the volume of 170 mL ethylene glycol) exhibits the higher photodegradation under the visible light and presents 2.3 times higher than that of pure BiOBr for degradation of MO and the mass of BS170 is the half of BiOBr could achieve the same photocatalytic effect as BiOBr for the photodegradation of RhB. The results indicate the fabric of heterojunction could enhance the absorption capacity of visible light and separation efficiency of photoinduced electron-hole pairs to increase the photodegradation. Therefore, this work provides the novel strategy for fabricating the hierarchical type-II heterojunction photocatalyst for the degradation of dyes.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Fabrication of BiVO4/Bi12O15Cl6 Heterojunction Photocatalyst with Enhanced Photocatalytic Performance under Visible Light

Xu Yan,Ziyang Wu,Peipei Yang,Yongmei Fu,Wei Ma,Yong Zhao,Biao Liu,Yanli Mao,Hao Shen,Lijun Jia

DOI: https://doi.org/10.1088/2053-1591/ab20b1

IF: 2.025

2019-01-01

Materials Research Express

Abstract:In this paper, BiVO4/Bi12O15Cl6 was prepared by combination of ion exchange process and hydrothermal method. The photocatalytic performance of the as-prepared photocatalyst was systematically investigated via the photodegradation of tetracycline (TC) under visible light irradiation. The BiVO4/Bi12O15Cl6 composites showed much higher photocatalytic efficiency than that of BiVO4 and Bi12O15Cl6 . The increased photocatalytic performance is attributed to the formation of heterojunction between BiVO4 and Bi12O15Cl6, which results in the effective charges separation and visible light absorption. Significantly, hydroxy radical (center dot OH) and superoxide radical (center dot O-2(-)) were confirmed to be the dominant reactive species. Additionally, a direct Z-scheme mechanism was proposed on the basis of photoelectrochemical measurement and bang gap analyses.
Construction of ZnIn2S4/Bi2MoO6 Heterojunction Enhancement Photocatalytic Hydrogen Evolution Performance under Visible Light

Chenmei Gao,Yu Xie,Yong Chen,Yun Ling,Yongcun Ma,Yifan Zhang,Yi Shao

DOI: https://doi.org/10.1016/j.ijhydene.2023.04.123

IF: 7.2

2023-01-01

International Journal of Hydrogen Energy

Abstract:One of the major challenges in photocatalytic hydrogen production is to improve the separation efficiency of photo-generated carriers. Therefore, we prepared ZIS/BMO heterojunctions by hydrothermal method to promote the directional separation of photo-generated carriers. A series of characterization results show that the successful preparation of heterojunctions substantially increases the separation and transfer rate of photogenerated carriers. 11% ZIS/BMO had the highest photocatalytic hydrogen production performance reached 1502.6 mmol/g/h, which is 2.78 times than ZIS monomer. Simple construction of heterojunctions but dramatic improvement of photocatalytic hydrogen production performance opens up new horizons for photocatalyst modification.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Enhanced visible light photocatalytic activity in BiOCl/SnO2: heterojunction of two wide band-gap semiconductors

menglin sun,qihang zhao,chunfang du,zhiliang liu

DOI: https://doi.org/10.1039/c4ra14187c

IF: 4.036

2015-01-01

RSC Advances

Abstract:A series of BiOCl/SnO2 heterojunctions exhibiting exceptional visible light photocatalytic performance have been successfully prepared using a two-step solution route. The physical and chemical properties of the as-prepared samples were characterized by a range of techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), Brunauer-Emmett-Teller (BET), photoluminescence spectroscopy (PL), Mott-Schottcky measurement and surface photovoltage spectroscopy ( SPS). It's found that SnO2 nanoparticles with average particle size of similar to 4 nm were uniformly dispersed on the {110} facets of BiOCl nanosheets and a heterojunction was formed at the interface between SnO2 and BiOCl. A defect state referenced to oxygen vacancies and (VBiVOVBi "')-V-"'-V-center dot center dot vacancy associates play a vital role in reducing the band gap energy of SnO2 and BiOCl, respectively. With well-defined defect chemistry and heterostructure, the conjunction of two wide band-gap semiconductors (SnO2 and BiOCl) may lead to visible light harvesting and enhanced photocatalytic performance. The photocatalytic activities of the BiOCl/SnO2 heterojunction photocatalysts were evaluated by measuring the degradation of rhodamine B (RhB) under visible light irradiation. As was expected, the BiOCl/SnO2 composites displayed highly enhanced photocatalytic activity in comparison to the individual counterpart. The PL and SPS spectra confirmed that the formation of a p-n heterojunction between BiOCl and SnO2 can markedly accelerate the separation rate and inhibit the recombination of photo-induced electro-hole pairs, thus promoting the photocatalytic activity. As a consequence of well-modulated electronic structures, defect centers and heterostructure, the photocatalytic performance of BiOCl/SnO2 heterojunctions was well regulated and optimized.
Enhanced visible light photocatalytic performance of a novel heterostructured Bi4O5Br2/Bi24O31Br10/Bi2SiO5 photocatalyst

Di Liu,Wenqing Yao,Jun Wang,Yanfang Liu,Mo Zhang,Yongfa Zhu

DOI: https://doi.org/10.1016/j.apcatb.2015.01.037

2015-01-01

Abstract:A novel Bi4O5Br2/Bi24O31Br10/Bi2SiO5 heterostructure photocatalyst was synthesized successfully by in situ ion exchange reaction using BiOBr microspheres as the starting material for the first time. The heterostructured semiconductor showed superior photocatalytic activity in visible light degradation of phenol compared to pure BiOBr and other reported Bi-based photocatalysts. The exceptional photocatalytic activity of the heterostructured system can be attributable to the well-aligned straddling band-gap structures which can promote the flow of charge carriers via the heterojunction, extended light absorbance and a large Brunauer-Emmett-Teller (BET) specific surface area. The present work also proves that engineering of heterojunctions with high matching of lattices and well-aligned straddling band-structures is a significantly efficient way to achieve photocatalysts with high photocatalytic activity. (C) 2015 Elsevier B.V. All rights reserved.

Fabrication of a visible-light In<sub>2</sub>S<sub>3</sub>/BiPO<sub>4</sub> heterojunction with enhanced photocatalytic activity

Fabrication of a Visible-Light In2S3/BiPO4 Heterojunction with Enhanced Photocatalytic Activity

BiOBr–carbon Nitride Heterojunctions: Synthesis, Enhanced Activity and Photocatalytic Mechanism

Fabrication of Multiple Heterojunctions with Tunable Visible-Light-active Photocatalytic Reactivity in BiOBr-BiOI Full-Range Composites Based on Microstructure Modulation and Band Structures.

Bi2O2(OH)NO3/AgI Heterojunction with Enhanced UV and Visible-Light Responsive Photocatalytic Activity and Mechanism Investigation

In Situ Co-Crystallization for Fabrication of G-C3n4/bi5o7i Heterojunction for Enhanced Visible-Light Photocatalysis

Fabrication of Z-scheme MoO3/Bi2O4 heterojunction photocatalyst with enhanced photocatalytic performance under visible light irradiation

Fabrication of a Β-Bi2o3/bioi Heterojunction and Its Efficient Photocatalysis for Organic Dye Removal

Constructing a Novel Bi2SiO5/BiPO4 Heterostructure with Extended Light Response Range and Enhanced Photocatalytic Performance

Fabrication of Novel G-C3n4@bi/bi2o2co3 Z-Scheme Heterojunction with Meliorated Light Absorption and Efficient Charge Separation for Superior Photocatalytic Performance.

Construction of a novel Ca2Bi2O5/α-Bi2O3 semiconductor heterojunction for enhanced visible photocatalytic application

In Situ Co-Precipitation for the Synthesis of an Ag/Agbr/Bi5o7i Heterojunction for Enhanced Visible-Light Photocatalysis

Fabrication and efficient visible light-induced photocatalytic activity of Bi 2WO 6/BiVO 4 heterojunction

Rationally designed Sb2S3/PDI composites with enhanced visible light photoactivity

Fabrication Of N-Tio2/Inbo3 Heterostructures With Enhanced Visible Photocatalytic Performance

In Situ Fabrication of Bi2WO6/MoS2/RGO Heterojunction with Nanosized Interfacial Contact via Confined Space Effect toward Enhanced Photocatalytic Properties

Fabrication of hierarchical hollow BiOBr@ZnIn 2 S 4 heterojunction to enhance the visible-light-driven photodegradation of dyes

Fabrication of BiVO4/Bi12O15Cl6 Heterojunction Photocatalyst with Enhanced Photocatalytic Performance under Visible Light

Construction of ZnIn2S4/Bi2MoO6 Heterojunction Enhancement Photocatalytic Hydrogen Evolution Performance under Visible Light

Enhanced visible light photocatalytic activity in BiOCl/SnO2: heterojunction of two wide band-gap semiconductors

Enhanced visible light photocatalytic performance of a novel heterostructured Bi4O5Br2/Bi24O31Br10/Bi2SiO5 photocatalyst