A Novel Porous Mo3N2/MoO3 Hybrid Nanobelts As Supercapacitor Electrode Material

Yao Yuan,Xing-Ru Li,Xuyang Zhang,Jiacheng Wang,Yao Zhou,Cheng-Te Lin,Tsung-Wu Lin,Minghui Yang

DOI: https://doi.org/10.1088/2399-1984/aadbea

2019-01-01

Nano Futures

Abstract:Abstract This article is withdrawn as it is a duplicate of https://doi.org/10.1088/2399-1984/aad9b8.

What problem does this paper attempt to address?

A novel porous Mo3N2/MoO3 hybrid nanobelt as supercapacitor electrode material

Yao Yuan,Xing-Ru Li,Xuyang Zhang,Jiacheng Wang,Yao Zhou,Cheng-Te Lin,Tsung-Wu Lin,Minghui Yang

DOI: https://doi.org/10.1088/2399-1984/aad9b8

2018-01-01

Nano Futures

Abstract:Mo3N2/MoO3 hybrid composites with a porous nanobelt structure are prepared by a generally applicable strategy. Benefiting from the unique porous nanobelt architecture and the synergistic contributions of the components, Mo3N2/MoO3 hybrid exhibits excellent performance as a supercapacitors. Herein, Mo3N2/MoO3 hybrid is explored as a potential capacitive material for the first time. This composite shows a significantly larger specific capacitance (282 F g(-1) at the current density of 1 A g(-1)) than a single component with outstanding cyclic stability (with 93% retention of the original specific capacitance even after 1000 CV cycles). An asymmetric supercapacitor device is also fabricated with a maximum energy density of 17.4 Wh kg(-1) at 697 W kg(-1).
Enhanced Supercapacitor Performance Based on 3D Porous Graphene with MoO2 Nanoparticles

Zhang Lina,Lin Hongtao,Zhai Liming,Nie Mengfan,Zhou Jin,Zhuo Shuping

DOI: https://doi.org/10.1557/jmr.2016.438

2016-01-01

Abstract:Three dimensional (3D) porous graphene decorated with MoO2 nanoparticles were successfully synthesized by hydrothermal method and characterized by SEM and TEM, x-ray diffraction, Raman spectra, x-ray photoelectron spectroscopy, nitrogen adsorption–desorption analysis and electrochemical experiments. The results revealed that the in situ formed monoclinic MoO2 nanoparticles were randomly decorated on the surface of graphene sheets and the obtained graphene–MoO2 nanohybrids were 3D porous structures. The mass ratio of molybdenum precursor with GO has effects on the specific surface area and the electrochemical properties of the nanocomposite. The M30G1 (the mass ratio of molybdenum precursor with GO was 30:1) composite electrode exhibited a higher specific capacitance and better cycling stability. The specific capacitances were 356 F/g at the current density of 0.1 A/g in KOH electrolyte, which predicted their potential application in energy storage. The electrochemical performance of M30G1 composite was also investigated in Na2SO4 electrolyte, which was poorer than that in KOH electrolyte. Therefore, the chosen of electrolyte is important to materials performance.
A High-Performance Hybrid Supercapacitor with NiO Derived NiO@Ni-MOF Composite Electrodes

Shanshan Xiong,Shuyao Jiang,Juan Wang,Hongjun Lin,Mengxian Lin,Shuting Weng,Shuai Liu,Yang Jiao,Yanchao Xu,Jianrong Chen

DOI: https://doi.org/10.1016/j.electacta.2020.135956

IF: 6.6

2020-01-01

Electrochimica Acta

Abstract:Metal-organic framework (MOF) is a class of porous material, which has been gradually applied in supercapacitor fields but remains a significant challenge owing to their intrinsic instability and poor conductivity. Herein, we design a new strategy for synthesizing a well-aligned porous NiO@Ni-MOF/NF cylindrical cage-shape structure derived from NiO self-sacrificed template and precursor. Particularly, this unique construction structure could not only boost the conductivity of the electrode, but also endow the Ni-MOF with a good orientation to promote the transport of electrons and ion in electrochemical energy storage process. The as-prepared NiO@Ni-MOF/NF delivers an amazing specific capacity (1853 C cm(-2) at 1 mA cm(-2) ) superior to NiO/NF (242 C cm(-2)), as well as a relatively low impedance. The hybrid supercapacitor (HSC) is composed of the NiO@Ni-MOF/NF and carbon nanotube (CNT) as the positive and negative electrode, respectively. This HSC exhibits a specific capacitance of 144 F g(-1) at 1 A g(-1). The maximum energy and power densities of this HSC device reach to 39.2 W h kg(-1) and 7000 W kg(-1), respectively, showing good cycling stability with 94% capacity retention over 3000 cycles. This work proposes an innovative strategy for rational preparation well-aligned MOF arrays, which could serve as a promising method in the asymmetric supercapacitor devices field. (C) 2020 Elsevier Ltd. All rights reserved.
Nanoporous materials derived from metal-organic framework for supercapacitor application

Dandan Chen,Lishuang Wei,Jiangfeng Li,Qingsheng Wu

DOI: https://doi.org/10.1016/j.est.2020.101525

IF: 9.4

2020-01-01

Journal of Energy Storage

Abstract:Metal-organic frameworks as a novel class of porous coordination polymers are favored in the field of supercapacitors due to their adjustable composition, high devisable structures, super-large surface area, and governable porosity. However, the low electrical conductivity and poor cycling stability restrict the utilization of MOFs as electrode material. Recently, a serious of MOF-derived nanoporous material has been applied for supercapacitor, including mono-, binary- and ternary- metal and metal matric carbon composites. In this review, the recent achievement of MOF-derived nanoporous material and their synthetic method, morphology, electrochemical performance has been discussed. The effective strategies for MOF-derived material have also been proposed, and the application and development trend have been viewed.
Design and Fabrication of Macroporous Polyaniline Nanorods@graphene-Like MoS2 Nanocomposite with High Electrochemical Performance for Supercapacitors

Huihui Wang,Li Ma,Mengyu Gan,Tao Zhou

DOI: https://doi.org/10.1016/j.jallcom.2016.12.344

IF: 6.2

2016-01-01

Journal of Alloys and Compounds

Abstract:A novel macroporous polyaniline nanorods (MPN)@graphene-like MoS2 (MoS2) nanocomposite has been successfully prepared by combining the simple template method with hydrothermal reaction. The compositions of the nanocomposite is systematically characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques. The morphologies and microstructures of samples are examined by field-emission scanning electron microscopy (FESEM). The capacitive performance are investigated by cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD). The nano composite exhibits a high specific capacitance of 602.9 F g(-1) at a current density of 0.5 A g(-1) and excellent rate capability (retains 71.9% even at a current density of 10 A g(-1)). Moreover, the material also has a high energy density of 433 Wh kg(-1) at a power density of 6060 W kg(-1) and superior cycling stability that can maintain 86.7% of its initial capacitance after 2000 cycles at the current density of 10 A g(-1). The good electrochemical properties rendering MPN@MoS2 to be a promising electrode material for supercapacitors. (C) 2016 Elsevier B.V. All rights reserved.
Designed Synthesis of Porous NiMoO4/C Composite Nanorods for Asymmetric Supercapacitors

Boli Tong,Wutao Wei,Xueli Chen,Jing Wang,Wanyu Ye,Shizhong Cui,Weihua Chen,Liwei Mi

DOI: https://doi.org/10.1039/c9ce01031a

IF: 3.756

2019-01-01

CrystEngComm

Abstract:Porous and carbon composited binary transition metal oxide nanomaterials provide high ionic conductivity and electronic conductivity.
Porous Hybrid Composites of Few-Layer MoS2 Nanosheets Embedded in a Carbon Matrix with an Excellent Supercapacitor Electrode Performance.

Hongmei Ji,Chao Liu,Ting Wang,Jing Chen,Zhengning Mao,Jin Zhao,Wenhua Hou,Gang Yang

DOI: https://doi.org/10.1002/smll.201502355

IF: 13.3

2015-01-01

Small

Abstract:Porous hierarchical architectures of few-layer MoS2 nanosheets dispersed in carbon matrix are prepared by a microwave-hydrothermal method followed by annealing treatment via using glucose as C source and structure-directing agent and (NH4)(2)MoS4 as both Mo and S sources. It is found that the morphology and size of the secondary building units (SBUs), the size and layer number of MoS2 nanosheets as well as the distribution of MoS2 nanosheets in carbon matrix, can be effectively controlled by simply adjusting the molar ratio of (NH4)(2)MoS4 to glucose, leading to the materials with a low charge-transfer resistance, many electrochemical active sites and a robust structure for an outstanding energy storage performance including a high specific capacitance (589 F g(-1) at 0.5 A g(-1)), a good rate capability (364 F g(-1) at 20 A g(-1)), and an excellent cycling stability (retention 104% after 2000 cycles) for application in supercapacitors. The exceptional rate capability endows the electrode with a high energy density of 72.7 Wh kg(-1) and a high power density of 12.0 kW kg(-1) simultaneously. This work presents a facile and scalable approach for synthesizing novel heterostructures of MoS2-based electrode materials with an enhanced rate capability and cyclability for potential application in supercapacitor.
Design, Hydrothermal Synthesis and Electrochemical Properties of Porous Birnessite-Type Manganese Dioxide Nanosheets on Graphene As a Hybrid Material for Supercapacitors

Ying Liu,De Yan,Renfu Zhuo,Shuankui Li,Zhiguo Wu,Jun Wang,Pingyuan Ren,Pengxun Yan,Zhongrong Geng

DOI: https://doi.org/10.1016/j.jpowsour.2013.05.062

IF: 9.2

2013-01-01

Journal of Power Sources

Abstract:MnO2-graphene hybrid with a unique structure of porous birnessite-type manganese dioxide (MnO2) nanosheets on graphene has been designed and synthesized by a simple hydrothermal method. The formation mechanism of the hybrid is discussed based on a series of time-dependent experiments. Electrochemical measurements reveal that the MnO2-graphene electrode exhibits much higher specific capacitance (315 F g(-1) at a current density of 0.2 A g(-1)) and better rate capability (even 193 F g(-1) at 6 A g(-1)) compared with both the graphene and MnO2 electrodes. Moreover, the capacitance of MnO2-graphene electrode is still 87% retained after 2000 cycles at a charging rate of 3 A g(-1). The superior capacitive performance of the hybrid is attributed to its unique structure, which provides good electronic conductivity, fast electron and ion transport, and high utilization of MnO2. (C) 2013 Elsevier B.V. All rights reserved.
A dual CoNi MOF nanoshee/nanotube assembled on carbon cloth for high performance hybrid supercapacitors

Shusheng Xu,Ruiqi Liu,Xuerong Shi,Yujie Ma,Min Hong,Xinwei Chen,Tao Wang,Fangjie Li,Nantao Hu,Zhi Yang

DOI: https://doi.org/10.1016/j.electacta.2020.136124

IF: 6.6

2020-01-01

Electrochimica Acta

Abstract:Layered-structure MOF is a promising material for electrochemical energy storage applications. However, low conductivity hinders their electrochemical performance. Herein, a hierarchical layered-structure CoNi-MOF with ultrathin nanosheets and nanotube arrays are directly grown on carbon cloth (CC) with Co(OH)(2) as both template and Co source. The synthesized CC/CoNi-MOF shows high areal capacity of 1.01 C cm(-2) at 2 mA cm(-2), while keeps 61.4% capacity retention at 15 mA cm(-2). A hybrid supercapacitor is successfully fabricated with CC/CoNi-MOF as positive electrode and reduced graphene oxidecarbon nanotube as negative electrode, possessing a maximum areal capacitance of 846 mF cm(-2) at 1 mA cm(-2), a high energy density of 55.5 Wh kg(-1) at 175.5 W kg(-1), and excellent cycling stability (96.5% after 10000 cycles). This work may pave a new way for designing MOF based materials with similar structure for high performance supercapacitors. (C) 2020 Elsevier Ltd. All rights reserved.
Electrospun Porous MnMoO 4 Nanotubes As High-Performance Electrodes for Asymmetric Supercapacitors

Yang Lu,Menglong Zhao,Rongjie Luo,Qiuhong Yu,Jinru Lv,Weixiao Wang,Hailong Yan,Tao Peng,Xianming Liu,Yongsong Luo

DOI: https://doi.org/10.1007/s10008-017-3781-2

IF: 2.747

2017-01-01

Journal of Solid State Electrochemistry

Abstract:MnMoO4 nanotubes of diameter about 120 nm were successfully synthesized by a single-spinneret electrospinning technique followed by calcination in air, and their structural, morphological, and electrochemical properties were studied with the aim to fabricate high-performance supercapacitor devices. The obtained MnMoO4 nanotubes display a 1D architecture with a porous structure and hollow interiors. Benefiting from intriguing structural features, the unique MnMoO4 nanotube electrodes exhibit a high specific capacitance, excellent rate capability, and cycling stability. As an example, the tube-like MnMoO4 delivers a specific capacitance of 620 F g−1 at a current density of 1 A g−1, and 460 F g−1 even at a very high current density of 60 A g−1. Remarkably, almost no decay in specific capacitance is found after continuous charge/discharge cycling for 10,000 cycles at 1 A g−1. An asymmetric supercapacitor fabricated from this MnMoO4 nanotubes and activated carbon displayed a maximum high energy density of 31.7 Wh kg−1 and a power density of 797 W kg−1, demonstrating a good prospect for practical applications in energy storage electronics.
Three-Dimensional Porous Flower-like NiCo-MOF@Ni-LDH Composite Electrode for High-Performance Supercapacitors

Quanyou Feng,Haibiao Zhang,Zhixiang Guo,Yiren Liu,Naien Shi,Jingrui Zhang,Shasha Wang,Linghai Xie

DOI: https://doi.org/10.1021/acsaem.4c00919

IF: 6.4

2024-01-01

ACS Applied Energy Materials

Abstract:Metal-organic frameworks (MOFs) are renowned for their high porosity and meticulously structured pores. Nonetheless, intrinsic shortcomings, namely, low electrical conductivity and inadequate stability, impede their broad application as electrode materials. Herein, the bimetallic nickel-cobalt MOF (NiCo-MOF) was prepared using layered double hydroxides (LDH) as precursors by a reverse design strategy, and then the flower-like NiCo-MOF@Ni-LDH was synthesized by hydrothermal recombination of NiCo-MOF with nickel layer double hydroxide (Ni-LDH). The NiCo-MOF@Ni-LDH demonstrates an exceptional specific capacitance of 1880 F g(-1) at 1 A g(-1), coupled with an outstanding rate performance, maintaining 81.49% of its capacitance at a higher current density of 10 A g(-1). The excellent electrochemical characteristics can be ascribed to the unique porous structure, which significantly enhances the specific surface area and augments the availability of active sites, while the presence of open pore channels on the surface facilitates ion diffusion. Moreover, at a power density of 799.9 W kg(-1), an asymmetric supercapacitor (ASC) employing a NiCo-MOF@Ni-LDH//activated carbon configuration exhibits a remarkable energy density of 69.9 Wh kg(-1), concurrently preserving 75.6% capacity retention following 5000 charging and discharging cycles. These exceptional electrochemical properties highlight the promising potential of the NiCo-MOF@Ni-LDH nanocomposite as an electrode material for supercapacitors.
MoO3 Nanobelts Integrated with Partially-Exfoliated Graphite Paper for High-Performance Supercapacitors

Haifeng Cao,Yi Pan,Chenjing Shi,Li Guo,Jinlong Yang,Yanzhong Wang

DOI: https://doi.org/10.1016/j.diamond.2021.108806

IF: 3.806

2022-01-01

Diamond and Related Materials

Abstract:Due to its excellent electrochemical properties, MoO3 is considered to be a promising electrode material in the field of energy storage, but it still suffers low electronic conductivity and serious aggregation. Herein, the partially expanded graphite paper (EGP) with a three-dimensional porous structure is synthesized by a cathodic electrochemical exfoliation, serving as a conductive substrate for the in-situ growth of MoO3 nanobelts via a simple hydrothermal method. The self-supporting MoO3/EGP composite material directly used as the electrode material of the supercapacitor, shows a high specific capacitance of 7.1 F cm(-2) at 1 mA cm(-2). In addition, the assembled symmetrical supercapacitor by using MoO3/EGP as electrodes offers an energy density of 0.77 mWh cm(-2) at a power density of 2.41 mW cm(-2) and the capacitance retention is 84.1% after 5000 cycles at 10 mA cm(-2), indicating the excellent cyclic stability. The remarkable electrochemical performance of MoO3/EGP is attributed to the self-supporting porous structure of EGP with high electronic conductivity, which not only effectively prevents the aggregation of MoO3 nanobelts but also promotes the transfer kinetics of ion and electron.
Supercapacitive Energy Storage Performance of Molybdenum Disulfide Nanosheets Wrapped with Microporous Carbons

Qunhong Weng,Xi Wang,Xuebin Wang,Chao Zhang,Xiangfen Jiang,Yoshio Bando,Dmitri Golberg

DOI: https://doi.org/10.1039/c4ta06303a

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:We conceived a material composed of a pseudocapacitive core and an electrostatic double-layer capacitive porous shell for advanced electrochemical energy storage. As a proof-of-concept, the MoS2 nanosheets wrapped with MOF (ZIF-8)-derived microporous carbons (MoS2@MPC) were fabricated via a three-step strategy and applied in supercapacitor research. The structures exhibit a high specific capacitance, rate capability and cycling stability due to the combined involvement of both the structural portions under the electrochemical charge storage and release procedures.
MnO2 Nanosheets Grown on N and P Co-Doped Hollow Carbon Microspheres for High Performance Asymmetric Supercapacitor

Pengchao Wu,Meng Gao,Shichao Yu,Mengling Feng,Shaohua Liu,Jianwei Fu

DOI: https://doi.org/10.1016/j.electacta.2020.136681

IF: 6.6

2020-01-01

Electrochimica Acta

Abstract:The rapid development of supercapacitors has led to an increasing demand for the exploitation of stable and excellent electroactive electrode materials. Herein, a novel hybrid material of N, P co-doped hollow carbon microspheres (N/P-HCS) and ultrathin MnO2 nanosheets was facilely constructed for the electrode material of supercapacitors through a two-step synthetic strategy including the preparation of N/PHCS and subsequent growth of MnO2 nanosheets on N/P-HCS. The NIP-HCS@MnO2 hybrid possesses a N/P-HCS core and a porous shell composed of ultrathin MnO2 nanosheets. Moreover, the morphology and content of MnO2 in the hybrid can be controlled by designing the stoichiometric chemical reaction between N/P-HCS and KMnO4. The hybrid electrode exhibits excellent electron transport, fast electrolyte ions diffusion, rapid and reversible Faradaic reaction, and good rate performance. Additionally, a green asymmetric supercapacitor was manufactured using typical hybrid NIP-HCS@MnO2-30 as positive electrode and N/P-HCS as negative electrode, which displayed a high energy density of 32.21 Wh kg(-1) at a power density of 449.8 W kg(-1) and excellent cycling stability (capacitance retention of 94.5% after 3000 cycles). These results show that the NIP-HCS@MnO2 might be an attractive electrode material for practical application in advanced supercapacitor. (C) 2020 Elsevier Ltd. All rights reserved.
Mixed-Metallic Mof Based Electrode Materials For High Performance Hybrid Supercapacitors

Yang Jiao,Jian Pei,Dahong Chen,Chunshuang Yan,Yongyuan Hu,Qiang Zhang,Gang Chen

DOI: https://doi.org/10.1039/c6ta09805c

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Metal-organic frameworks (MOFs) have obtained increasing attention as a kind of novel electrode material for energy storage devices. Yet low capacity in most MOFs largely thwarts their application. In this study, an effective strategy was developed to improve the conductivity of MOFs by partially substituting Ni2+ in the Ni-MOF with Co2+ or Zn2+. The mixed-metal organic frameworks (M-MOFs) showed excellent electrochemical performance, which is attributed not only to the favorable paths for charge transport due to the presence of free pores, but also to the raised electrochemical double-layer capacitance (EDLC) at the enlarged specific surface area of the material. Meanwhile, the cycling stability of the assembled hybrid supercapacitors (M-MOFs//CNTs-COOH) is enhanced due to the alleviation of phase transformation during electrochemical cycling tests. More interestingly, the Co/Ni-MOF//CNTs-COOH also exhibited an excellent energy density (49.5 W h kg(-1)) and power density (1450 W kg(-1)) simultaneously. These values demonstrated the better performance of all the MOF materials in supercapacitors at present. In addition to broadening the application of MOFs, our study may open a new avenue for bridging the performance gap between batteries and supercapacitors.
Self-assembled Mo doped Ni-MOF nanosheets based electrode material for high performance battery-supercapacitor hybrid device

Qi Li,Hao Guo,Rui Xue,Mingyue Wang,Mengni Xu,Wenhu Yang,Junye Zhang,Wu Yang

DOI: https://doi.org/10.1016/j.ijhydene.2020.05.143

IF: 7.2

2020-08-01

International Journal of Hydrogen Energy

Abstract:The application of MOF materials in supercapacitors has been greatly restricted due to the poor conductivity and structural stability. Given that, this work improves the conductivity and stability of Ni-MOF by self-assembled strategy. We report here the Mo-doped Ni-MOF nanosheets (M-NMN), in which the Mo-based clusters are encapsulated in the holes of the Ni-MOF frame structure by self-assembly. The results show that the M-NMN-1 material with a Mi/Mo molar ratio of 1: 1 exhibits an excellent electrochemical performance. Furthermore, the nanosheet structure of the M-NMN-1 materials acts as a "superhigh way" for charge transport to accelerate charge transfer rate and enhance the conductivity of the electrode materials. As-prepared M-NMN-1 electrode material exhibits high specific capacity of 802 C g−1 at 1 A g−1. Furthermore, assembled battery-supercapacitor hybrid device exhibits an excellent energy density of 59 Wh kg−1 at a power density of 802 W kg−1, and superior cycle retention of 93% after 20,000 cycles.

energy & fuels,electrochemistry,chemistry, physical
Amorphous Porous Molybdenum Dioxide as an Efficient Supercapacitor Electrode Material

Shuhua Liu,Li Tian,Xiang Qi

DOI: https://doi.org/10.1002/crat.202100083

2021-10-10

Crystal Research and Technology

Abstract:Molybdenum dioxide (MoO2) with amorphous and porous nanostructure is synthesized via a facile hydrothermal methodology in a short reaction time and used as a supercapacitors electrode material. X-ray diffraction, transmission electron microscopy and cyclic voltammetry, galvanostatic charge–discharge measurements, and cycle stability tests of the amorphous and porous MoO2 are investigated. The novel-innovative structure conduces to the high specific capacity of 444.7 F g−1 at 1 A g−1 in 0.5 m H2SO4 solution. After 1000 cycles, 92% capacity is retained, indicating that the as-prepared electrodes possess excellent stabilities. Furthermore, at a high current density of 8 A g−1, the capacity can reach 210.67 F g−1, exhibiting outstanding rate characteristics. The amorphous and porous MoO2 achieves preeminent electrochemical performance, which can be attributed to the short ion diffusion routes and can provide reversible and fast faradic reactions and the porous structure will increase the utilization of the electrode materials. Besides that, the amorphous and porous MoO2 will let each MoO2 nanoparticles to participate in electrochemical reactions due to the full contact between electrolyte and MoO2. Therefore, MoO2 will be a promising anode material for aqueous supercapacitors.

crystallography
A novel MOF-derived binary metal oxides and carbon nanocomposite for high-performance symmetric supercapacitor application

Sheng Qiang Zheng,Siew Shee Lim,Chuan Yi Foo,Choon Yian Haw,Wee Siong Chiu,Chin Hua Chia,Poi Sim Khiew

DOI: https://doi.org/10.1007/s10854-023-10976-9

2023-07-26

Abstract:Transition metal oxides/carbon nanocomposites derived from metal–organic frameworks (MOFs) with enhanced electronic conductivity and high theoretical capacitance have been viewed as novel porous nanostructured electrode materials for electrochemical energy storage applications. Herein, sodium ion-intercalated MoO 3 /NiO/C nanostructures derived from MOFs were prepared through a facile solvothermal approach and followed by calcination at 400 °C. The as-synthesized nanocomposites were characterized using FT-IR, FESEM, EDX, XRD, TEM, and TGA. Benefitting from the synergistic effects and improved ionic transfer channels, the delivered maximum electrochemical capacitance was 548.41 F g −1 in 2-M KOH. Moreover, the electrochemical property was analyzed in terms of CV, EIS, and GCD, respectively, in a two-electrode system in an environmental-friendly aqueous electrolyte and a high energy density of 17.93 Wh kg −1 was acquired when a symmetric supercapacitor device was assembled. Besides, a remarkable retained specific capacitance and coulombic efficiency were approximately at 99.67% and 96.66% after 8000 continuous cycles. It evidently revealed the potential application of MOF-derived metal oxides/carbon composites in high-performance electrochemical energy storage devices.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Designing Nanographitic Domains in N-doped Porous Carbon Foam for High Performance Supercapacitors

Ling Ni,Runwei Wang,Hongbin Wang,Chuanyin Sun,Bing Sun,Xin Guo,Shang Jiang,Zhiqiang Shi,Wendan Jing,Liangkui Zhu,Shilun Qiu,Zongtao Zhang

DOI: https://doi.org/10.1016/j.carbon.2018.07.057

IF: 10.9

2018-01-01

Carbon

Abstract:Porous carbon with high surface area and low cost has emerged as promising alternative electrode for supercapacitor. However, the poor electrical conductivity arising from the rich existence of sp(3) carbon remains a big challenge. Here, a novel strategy is reported for the nanographitic domains (sp(2) carbon) distributed in porous carbon via transition metal acetate (M(CH3COO)(2)M = Fe, Co, Ni) assistance and in situ N-doping during the activation process. The resultant different N-doped porous carbon foams (denoted as NCF (Fe), NCF (Co), NCF (Ni)) exhibit a localized graphitic structure and hierarchically porous framework with micropore integrating into macroporous scaffold. Whereas, the NCF (Fe) shows ultrahigh BET surface areas of up to 2630 m(2)g(-1), a large pore volume of up to 1.1 cm(3)g(-1), notable nitrogen content of 5.34 wt %, optimal pore size and superior hydrophilicity. When adopted as supercapacitor electrode, the NCF (Fe) presents a reversible capacity of 273.7 F g(-1) in 6 M KOH aqueous electrolyte. Even at a high current of 10 A g(-1), a capacity of 200.5 F g(-1) can also be achieved, which makes it a potential capacitive material for high-rate supercapacitor. Considering other advantages of the method such as cheap precursor, facile process et al., NCF (Fe) can be rendered to be a promising candidate for commercial supercapacitors. (C) 2018 Elsevier Ltd. All rights reserved.
Sandwich-like Nitrogen-Doped Porous Carbon Nanosheet/MnO2 Nanosheet Composites for Asymmetric Supercapacitors

Pengchao Wu,Kai Wang,Shichao Yu,Mengling Feng,Shaohua Liu,Jianwei Fu

DOI: https://doi.org/10.1021/acsanm.1c03223

IF: 6.14

2021-01-01

ACS Applied Nano Materials

Abstract:The hybrid of MnO2 and advanced carbon materials is an effective route to develop high-performance supercapacitors. Herein, a distinctive nanohybrid architecture of sandwich-like nitrogen-doped porous carbon nanosheets/MnO2 nanosheets (N-PCNs/MnO2) is controllably prepared via a simple explosion-assisted activation strategy and a subsequent hydrothermal reaction in KMnO4 solution and applied in high energy density asymmetric supercapacitors. A series of characterization results show that the crisscross and continuous MnO2 nanosheets are well deposited on the porous carbon substrate as core materials. Under the optimized feeding concentration of the KMnO4 solution, the resultant typical sample N-PCNs/MnO2-30 nanohybrid exhibits a large specific surface area of up to 116.1 m(2) g(-1) and good electrochemical performance such as a high specific capacitance of 295 F g(-1) at 0.5 A g(-1) coupled with remarkable cycling stability (93.1% capacitance retention after 5000 cycles). Meanwhile, the assembled asymmetric supercapacitor device possesses a wide operating voltage (2.0 V) in the Na2SO4 aqueous electrolyte and shows a high energy density of 41.66 W h kg(-1 )at a power density of 522.6 W kg(-1) with 93% capacitance retention after 5000 charge-discharge cycles. The observed findings suggest that the sandwich-like N-PCNs/MnO2-30 nanohybrid has promising potential for practical application in state-of-the-art energy storage devices.

A Novel Porous Mo3N2/MoO3 Hybrid Nanobelts As Supercapacitor Electrode Material

A novel porous Mo3N2/MoO3 hybrid nanobelt as supercapacitor electrode material

Enhanced Supercapacitor Performance Based on 3D Porous Graphene with MoO2 Nanoparticles

A High-Performance Hybrid Supercapacitor with NiO Derived NiO@Ni-MOF Composite Electrodes

Nanoporous materials derived from metal-organic framework for supercapacitor application

Design and Fabrication of Macroporous Polyaniline Nanorods@graphene-Like MoS2 Nanocomposite with High Electrochemical Performance for Supercapacitors

Designed Synthesis of Porous NiMoO4/C Composite Nanorods for Asymmetric Supercapacitors

Porous Hybrid Composites of Few-Layer MoS2 Nanosheets Embedded in a Carbon Matrix with an Excellent Supercapacitor Electrode Performance.

Design, Hydrothermal Synthesis and Electrochemical Properties of Porous Birnessite-Type Manganese Dioxide Nanosheets on Graphene As a Hybrid Material for Supercapacitors

A dual CoNi MOF nanoshee/nanotube assembled on carbon cloth for high performance hybrid supercapacitors

Electrospun Porous MnMoO 4 Nanotubes As High-Performance Electrodes for Asymmetric Supercapacitors

Three-Dimensional Porous Flower-like NiCo-MOF@Ni-LDH Composite Electrode for High-Performance Supercapacitors

MoO3 Nanobelts Integrated with Partially-Exfoliated Graphite Paper for High-Performance Supercapacitors

Supercapacitive Energy Storage Performance of Molybdenum Disulfide Nanosheets Wrapped with Microporous Carbons

MnO2 Nanosheets Grown on N and P Co-Doped Hollow Carbon Microspheres for High Performance Asymmetric Supercapacitor

Mixed-Metallic Mof Based Electrode Materials For High Performance Hybrid Supercapacitors

Self-assembled Mo doped Ni-MOF nanosheets based electrode material for high performance battery-supercapacitor hybrid device

Amorphous Porous Molybdenum Dioxide as an Efficient Supercapacitor Electrode Material

A novel MOF-derived binary metal oxides and carbon nanocomposite for high-performance symmetric supercapacitor application

Designing Nanographitic Domains in N-doped Porous Carbon Foam for High Performance Supercapacitors

Sandwich-like Nitrogen-Doped Porous Carbon Nanosheet/MnO2 Nanosheet Composites for Asymmetric Supercapacitors