Abstract:A simplified (7 species and 9 processes) plasma kinetic model is proposed to investigate the mechanism of the plasma aerodynamic actuation driven by nanosecond-pulsed dielectric barrier discharge (NS-DBD). The governing equations include conservation equations for each species, the Poisson equation for the electric potential, and Navier-Stokes equations for the gas dynamic flow. Numerical simulations of plasma discharge and flow actuation on NS-DBD plasma actuators have been carried out. Key discharge characteristics and the responses of the quiescent air were reproduced and compared to those obtained in experiments and numerical simulations. Results demonstrate that the reduced plasma kinetic model is able to capture the dominant species and reactions to predict the actuation in complicated hydrodynamics. For the one-dimensional planar and two-dimensional symmetric NS-DBD, the forming of the sheath collapse is mainly due to the charge accumulation and secondary emission from the grounded electrode. Rapid species number density rise and electric field drop occur at the edge of the plasma sheath, where the space charge density gradient peaks. For the aerodynamic actuation with typical asymmetry electrodes, discharge characteristics have a core area on the right edge of the upper electrode, where the value can be much higher. The formation and propagation of the compression waves generated through rapid heating have also been performed and compared to those measured in a recent experiment. Energy release leads to gas expansion and forms a cylindrical shock wave, centering at the upper electrode tip with low gas acceleration. For the present single pulsed 12 kV case, the mean temperature of gas heating reaches about 575 K at 1 μs and decreases to about 460 K at 10 μs.

Back Cover: Plasma Process. Polym. 5/2018

Inside Front Cover: Plasma Process. Polym. 4/2021

Outside Front Cover Picture: Plasma Process. Polym. 12/2020

Inside Back Cover: Plasma Process. Polym. 2/2022

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Ouside Cover Picture: Plasma Process. Polym. 11/2019

Outside Front Cover: Plasma Process. Polym. 9/2021

Outside Front Cover: Plasma Process. Polym. 5/2022

Numerical Study of the Influence of Dielectric Tube on Propagation of Atmospheric Pressure Plasma Jet Based on Coplanar Dielectric Barrier Discharge

Outside Front Cover: Plasma Process. Polym. 6/2023

Numerical Study of Plasma–Electrode Interaction During Arc Discharge in a DC Plasma Torch

Outside Front Cover: Plasma Process. Polym. 1/2024

Outside Front Cover: Plasma Process. Polym. 2/2022

Study of transport process and discharge structure of inductively coupled electronegative plasmas via fluid model and analytic theory collaboration

Numerical and Experimental Study on a Pulsed-Dc Plasma Jet

Ignition Properties of Helium Discharges in Dielectric Tubes with Radius from 50 Μm to 3 Mm

Two-phase flow simulation of plasma-ignited combustion in an energetic fluid bed

An Electrothermal Plasma Model Considering Polyethylene and Copper Ablation Based on Ignition Experiment

Modeling and Simulation of Plasma Gas Flow Driven by A Single Nanosecond-Pulsed Dielectric Barrier Discharge

Non-premixed Flame Dynamics Excited by Flow Fluctuations Generated from Dielectric-Barrier-Discharge Plasma

Numerical study of the interaction of a helium atmospheric pressure plasma jet with a dielectric material