Abstract:A new generation of red phosphors of complex fluoride matrices activated with Mn4+ has gained a broad interest in getting high color quality and low color temperature of solid-state white light-emitting diodes (WLEDs). However, besides their instability toward moisture, the extremely irregular and nonuniform morphologies of these phosphors have limited their practical industry applications. In the present study, a novel type of K3ScF6:Mn4+ red phosphor with highly regular, uniform, and high color purity was obtained successfully through a facile coprecipitation route under mild conditions. The crystal structure was identified with aids of the powder X-ray diffraction, Rietveld refinement, and density functional theory calculations. The prototype crystallizes in the space group Fm3 m with a cubic structure, and the lattice parameters are fitted well to be a = b = c = 8.4859(8) Å and V = 611.074(2) Å3. The Mn4+ ions occupy Sc3+ sites and locate at the centers of the distorted ScF6 octahedrons. A wide band gap of approximately 6.15 eV can provide sufficient space to accommodate impurity energy levels. Unlike most other Mn4+ ion-activated fluoride phosphors, the as-prepared K3ScF6:Mn4+ phosphors demonstrate highly uniform and regular morphologies with shapes transforming from cube to octahedron with increasing Mn4+ ion concentration. Under blue light excitation, the as-prepared K3ScF6:Mn4+ sample exhibits intense sharp-line red fluorescence (the strongest peak located at 631 nm) with high color purity. An excellent recovery in luminescence upon heating and cooling processes implies high stability of K3ScF6:Mn4+. Furthermore, a warm WLED fabricated with blue GaN chips merged with the mixture of K3ScF6:Mn4+ and the well-known commercial YAG:Ce3+ yellow phosphors exhibits wonderful color quality with lower correlated color temperature (3250 K) and higher color-rendering index ( Ra = 86.4). These results suggest that the K3ScF6:Mn4+ phosphor possesses stupendous potentiality for practical applications.

Room-temperature synthesis, controllable morphology and optical characteristics of narrow-band red phosphor K<sub>2</sub>LiGaF<sub>6</sub>:Mn<sup>4+</sup>

Room-temperature synthesis, controllable morphology and optical characteristics of narrow-band red phosphor K2LiGaF6:Mn4+

White-light-emitting Diodes Based on Ba2+ Co-Doped Sr3SiO5: Ce3+, Li+ Phosphor

Ca(La1-xEux)4Si3O13 red emitting phosphor for white light emitting diodes

Room-temperature synthesis, optimized photoluminescence and warm-white LED application of a highly efficient non-rare-earth red phosphor

Optical Characteristics, Morphology Evolution and Thermal Stability of Novel Red-Emitting Mn4+-activated K2LiAl1-yGayF6 Solid Solution Phosphors for High-Performance Warm WLED

Designed synthesis, morphology evolution and enhanced photoluminescence of a highly efficient red dodec-fluoride phosphor, Li3Na3Ga2F12:Mn4+, for warm WLEDs

Green synthesis, luminescent properties and application for WLED of flower-like K2LiAlF6:Mn4+ phosphor

The electronic and optical properties of a narrow-band red-emitting nanophosphor K<sub>2</sub>NaGaF<sub>6</sub>:Mn<sup>4+</sup>for warm white light-emitting diodes

Insight into a Novel Rare-Earth-free Red-Emitting Phosphor Li3Mg2NbO6:Mn4+: Structure and Luminescence Properties

The electronic and optical properties of a narrow-band red-emitting nanophosphor K2NaGaF6:Mn4+ for warm white light-emitting diodes

Hydrothermal Synthesis of Narrow-Band Red Emitting K2NaAlF6:Mn4+phosphor for Warm-White LED Applications

Co-precipitation Synthesis, Luminescent Properties and Application in Warm WLEDs of Na3GaF6:Mn4+ Red Phosphor

Highly Regular, Uniform K3ScF6:Mn4+ Phosphors: Facile Synthesis, Microstructures, Photoluminescence Properties, and Application in Light-Emitting Diode Devices

The design and preparation of the thermally stable, Mn<sup>4+</sup> ion activated, narrow band, red emitting fluoride Na<sub>3</sub>GaF<sub>6</sub>:Mn<sup>4+</sup> for warm WLED applications

Synthesis, Structure, and Performance of Efficient Red Phosphor Linage4o9: Mn4+ and Its Application in Warm Wleds

Room-temperature Synthesis and Warm-White LED Applications of Mn4+ Ion Doped Fluoroaluminate Red Phosphor Na3AlF6:Mn4+

Luminescence properties, crystal field and nephelauxetic effect on (NH4)2NaMF6: Mn4+ (M = Al, Ga and In) red phosphors for warm white light-emitting diodes

Luminescence properties, crystal field and nephelauxetic effect on (NH<sub>4</sub>)<sub>2</sub>NaMF<sub>6</sub>: Mn<SUP>4+</SUP> (M = Al, Ga and In) red phosphors for warm white light-emitting diodes

A Novel and Highly Efficient&nbsp;Rare-Earth Element-Free K <sub>2</sub>ge &Lt;sub>1-X</sub>ti <sub>x</sub>f <sub>6</sub>: Mn <sup>4+</sup> Red Phosphor for Warm White LEDs

A Red-Emitting Mn4+ Activated Phosphor with Controlled Morphology and Two-Dimensional Luminescence Nanofiber Film: Synthesis and Application for High-Performance Warm White Light-Emitting Diodes (Wleds)