Abstract:Heterogeneous-structured laminates (HSLs), which consist of multiple layers of metallic materials arranged in successive pairs of coarse-grained (CG) and nano-grained (NG) layers, have been recently reported to display excellent balance of strength and ductility. However, it is argued that accompanying state-of-art numerical models developed to simulate the deformation of this specific class of composite materials have limitations for investigating their underlying damage evolution. Addressing this issue is essential to support the rational design, optimisation and application of HSLs, especially when subjected to contact and dynamic processes. For this reason, a novel 3D numerical framework for HSLs is proposed and tested in this research considering published experimental findings and dislocation theories. This framework comprehensively considers the evolution of various types of dislocations and back stress while being coupled with the Johnson Cook damage criterion. The HSL specimens simulated here were made of alternating layers of CG and NG copper separated by interface affected zones. Following initial microhardness and uniaxial tensile simulations on homogenous copper with different grain sizes, simulations of HSLs were conducted to study the effect of different layer thickness and the volume fraction of the NG layer. Overall, a good correlation between numerical and experimental results was achieved. An important and distinguishing characteristic of this research is that the proposed model enables the evolution of internal damage and the synergetic effect between the CG and NG layers to be investigated. Through the evaluation of the damage accumulation factor in the NG layer, the simulations results yielded quantitative information which aligned with the following known experimental observations: 1) the smaller the layer thickness, then the smaller the internal damage and 2) the internal damage increases with the increase in volume content of the NG layer. In addition, for a set simulated strain of 10%, the developed model could be used to show that the damage accumulation factor in the NG layer was 10 times lower than that in its counterpart, i.e., a stand-alone NG layer not sandwiched between two CG layers.

Mixed Mode I/II Damage Initiation and Evolution in 3D-Printed Soft Interfacial Layer

Progressive failure analysis of 2D woven composites at the meso-micro scale

Failure Mechanism Transition of 3D-Printed Biomimetic Sutures

A Visco-Hyperelastic Softening Model for Predicting the Strain Rate Effects of 3D-Printed Soft Wavy Interfacial Layer

Construction and Simulation of Constitutive Model of Periodontal Ligament Based on Hyperelasticity-Viscoelasticity

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Predicting the Mixed-Mode I/II Spatial Damage Propagation along 3D-Printed Soft Interfacial Layer Via a Hyperelastic Softening Model

Mechanical Model of Suture Joints with Fibrous Connective Layer

Influence of design parameters on the flexural properties of a bio-inspired suture structure

A predictive microstructure-based approach for the anisotropic damage, residual stretches and hysteresis in biodegradable sutures

Stiffness and Toughness of Soft/stiff Suture Joints in Biological Composites

The Effects of Morphological Irregularity on the Mechanical Behavior of Interdigitated Biological Sutures under Tension.

Microstructural and damage parameter effect analysis on the failure mechanism of fibrous soft tissues with a structure-based unit cell model

Analysing fracture properties of bio-inspired 3D printed suture structures

Micromechanics-Based Modeling of Interfacial Debonding in Multilayer Structures

Crack modes and toughening strategies of bioinspired 3D printed double-helicoidal architectures

Computing the bond strength of 3D printed polylactic acid scaffolds in mode I and II using experimental tests, finite element method and cohesive zone modeling

Failure Characterization of Solid Structures Based on an Equivalence of Cohesive Zone Model

Numerical investigation of internal damage in heterogeneous-structured laminates using a 3D multiple physical mechanisms based constitutive model

A visco-hyperelastic-damage constitutive model for the analysis of the biomechanical response of the periodontal ligament

Three-dimensional numerical simulation of soft-tissue wound healing using constrained-mixture anisotropic hyperelasticity and gradient-enhanced damage mechanics