Abstract:Aiming at the problem of lower single granularity and uniformity of the existing air-suction seed-metering device under the condition of densely planted crops according to the agronomic requirements of soybean-maize strip intercropping mode, the disturbing effect of seeds on the seed-filling performance was studied to improve the seeding performance of the seed-metering device under the condition of high speed. Based on the theory of discrete element method (DEM), taking the air-suction seed-metering device designed for both soybean and maize as a model and maize variety of 'Zhengdan 958' suitable for densely planted as the research object, the DEM single-factor test was conducted on the influence of the structure, position, and number of bosses on disturbing performance with the average kinetic energy, average velocity, and average normal force of seeds as evaluation indexes. The results showed that the disturbing performance of seeds was better when the boss structure was D-type, the diameter of the base circle where bosses located was 160 mm, and the number of bosses was 13. To further improve the structural parameters of the D-type boss, the primary structural parameters, such as the side length and arc radius, were simulated by a single-factor test. The position, side length, and arc radius of the D-type boss were further optimized and verified using central composite design (CCD) based on the results of the single-factor test. The CCD results showed that the average kinetic energy of seeds was 7.39 × 10 −7 J, the average velocity was 4.53 × 10 −2 m/s, and the average normal force was 6.18 × 10 −2 N when the diameter of the base circle where bosses located at 159.865 mm, the side length and arc radius of the D-type boss of 5.690 mm and 5.476 mm, which significantly enhanced the disturbing performance of the seed-metering device. The optimized boss structures and parameters of the seed-metering device were validated with an all-factor test of working speed and working pressure. When the working speed and working pressure were 4 ~ 6 km/h and 7 ~ 7.5 kPa, the qualified rate was 94.75% ~ 97.49%, the multiple rate was 0.92% ~ 1.43%, and the leakage rate was 1.59% ~ 3.82%, all of which were substantially lower than the original one. Therefore, the seed-filling performance of the seed-metering device will be improved by increasing the disturbance of seeds to a certain extent.

The Flow-field Optimization of Vacuum Precision Seed-metering Device with Synchronous Plate and Chamber Based on CFD

Design and Experiment of Air-Suction Maize Seed-Metering Device with Auxiliary Guide

Design and Experimental Analysis of an Air-Suction Wheat Precision Hill-Seed Metering Device

Design And Experiment of Axial Air-Suction Drum Seed-Metering Device

Design and Experiment of Precision Seed Metering Device for Flow Adsorption of Quinoa Seeds

SIMULATION AND TEST OF FILLING PERFORMANCE OF PNEUMATIC PRECISION SEED METERING DEVICE BASED ON EDEM SOFTWARE

Numerical Analysis of Friction-Filling Performance of Friction-Type Vertical Disc Precision Seed-Metering Device Based on EDEM

Design and experiment of a centrifugal filling and cleaning high-speed precision seed metering device for maize

Raising the Speed Limit of Axial Piston Pumps by Optimizing the Suction Duct

Experimenting and Optimizing Design Parameters for a Pneumatic Hill-Drop Rapeseed Metering Device

Optimization and experiment of seed-filling performance of the air-suction densely planted seed-metering device based on DEM

Numerical Simulation of Turbine Flowmeter's Three-Dimensional Flow Fields

A Performance Test and Internal Flow Field Simulation of a Vortex Pump

Design shaped hole inserts by simulating and analysing the high-speed filling posture of maize seed particles

Test on adsorption posture and seeding performance of the high-speed precision dual-chamber maize metering device based on the seed characteristics

Seeding Performance Simulations and Experiments for a Spoon-Wheel Type Precision Cottonseed-Metering Device Based on EDEM

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

DEM Study of Seed Motion Model-Hole-Wheel Variable Seed Metering Device for Wheat

Simulation and Optimization Experiment: Working Process of a Cleaning Device for Flax Combine Harvester

Development of a new environmentally friendly and efficient centrifugal variable diameter metering device

Mixed Seeds of Oat and Vetch Based on DEM-Fluent Coupling Motion Simulation in a Venturi Tube