Abstract:Abstract Background The motion capture has been used as the usual method for measuring movement parameters of human, and most of the measuring data are obtained by partial manual process based on commercial software. An automatic kinematics data process was developed by programming on MATLAB software in this paper. Methods The motion capture measurement of healthy volunteers was carried out and the MATLAB program was used for data process. Firstly, the coordinate data of markers and anatomical points on human lower limb measured by motion capture system were read and repaired through the usual and the patch program. Meantime, the local coordinate systems of human femur and tibia were established with anatomical points. Then flexion/extension, abduction/adduction and internal/external rotation of human knee tibiofemoral joint were obtained by special coordinate transformation program. Results Using the above methods, motion capture measurements and batch data processing were carried out on squatting and climbing stairs of 29 healthy volunteers. And the motion characteristics (flexion/extension, internal/external rotation and adduction/abduction) of the knee joint were obtained. For example, the maximum internal/external rotation in squatting and climbing stairs were respectively was 30.5 degrees and 14 degrees, etc. Meantime, the results of this paper also were respectively compared with the results processed by other research methods, and the results were basically consistent, thus the reliability of our research method was verified. After calibration processing, the compiled MATLAB program of this paper can directly be used for efficient batch processing and avoiding manual modeling one by one. Conclusion A novel Patch Program of this paper has been developed, which can make reasonable compensation for missing and noise signals to obtain more complete motion data. At the same time, a universal data processing program has also been developed for obtaining the relative movement of various components of the human body, and the program can be modified for detail special analysis. These motion capture technologies can be used to judge whether the human body functions are abnormal, provide a reference for rehabilitation treatment and design of rehabilitation equipment, and evaluate the effectiveness before and after surgery.

2P1-A11 Measurement and Analysis of Upper Limb Movement of a Human Using Motion Capture

Human Motion Capture Using Wireless Inertial Sensors

Human upper limb dynamic motion measurement based on multi-dimensional video system

Motion Parameters Measurement of User-Defined Key Points Using 3D Pose Estimation

3D Upper Limb Motion Modeling and Estimation Using Wearable Micro-sensors

A Real-Time Upper Limb Motion Estimation System

Wearable Sensors for 3D Upper Limb Motion Modeling and Ubiquitous Estimation

Ubiquitous Human Body Motion Capture Using Micro-Sensors

A wearable motion capture device able to detect dynamic motion of human limbs

A Human Motion Capture System Based on Inertial Sensing and a Complementary Filter

A data process of human knee joint kinematics obtained by motion-capture measurement

Modification of muscle antagonistic relations and hand trajectory on the dynamic motion of Musculoskeletal Humanoid

Application of the Electromagnetic Tracking System to the Motion Measurement of Human Upper-Limb

A Motion-based User Interface for the Control of Virtual Humans Performing Sports.

Articulated-model based upper-limb pose estimation

The Design and Implementation of Natural Human-Robot Interaction System Based on Kinect Sensor

Anthropomorphic Reaching Movement Generating Method for Human-Like Upper Limb Robot

Method to measure human upper-limb motion based on the electromagnetic tracking system

Leveraging Two Kinect Sensors for Accurate Full-Body Motion Capture

Comparison of Motion Analysis Systems in Tracking Upper Body Movement of Myoelectric Bypass Prosthesis Users

[Measuring Human Arm Motion Parameters Based on High-Speed Camera].