Abstract:Taking advantage of the extended specific surface area and high conductivity, graphene has been widely subjected to extensive investigations by many research groups. Herein, three-dimensional graphene (3DG) were prepared by a facile and scalable ion-exchange method, which exhibited a porous structure with a specific surface area of 2400 m(2)/g and pore volume of 2.0 cm(3)/g. In a typical sysnthesis, two procedures played an important role in preparing the novel characteristics of 3DG: First, metal ions were used as the catalysis to graphitize the ion-exchange resin. Second, an KOH activation step at low temperatures (800) was applied on the exchange resin to produce a hierarchical porous structure of 3DG materials. The method of catalysis, chemical activation and heating treatment can form a unique interconnected structure and also effectively prevent graphene nanosheets from aggregating. Various structural and morphology analyses have been characterized by X-ray powder diffraction, Raman, Scanning electron microscope and Transmission electron microscope. Additionally, the enhanced specific surface area can improve capacitor performance of 3DG, which exhibited a high specific capacitance of 250 F/g when measured in a three-electrode system (KOH aqueous solution) and 120 F/g in asymmetric supercapacitor (TEMABF(4)/PC organic electrolytes). Furthermore, the as-prepared 3DG were successfully employed as both cathode and anode active materials for lithium ion capacitors (3DG-LIC) with high energy density (105 Wh/kg) because the potential window of 3DG-LIC extended from 2.5 to 4.0 V compared to traditional supercapacitor (SC) by prelithiation of anode. The performance and operating mechanism of 3DG-LIC were further studied by cyclic voltammetry, gals anostatic charge/discharge, and electrochemical impedance spectroscopy. The similar chemistry and microstructure maximizes the capacity and rate performance of cathode and anode, which indicates that the 3DG-LIC can be a promising candidate for high-energy power storage system and would have a wide application in other electrochemical applications.

A quasi-solid-state Li-ion capacitor with high energy density based on Li<sub>3</sub>VO<sub>4</sub>/carbon nanofibers and electrochemically-exfoliated graphene sheets

A quasi-solid-state Li-ion capacitor with high energy density based on Li3VO4/carbon nanofibers and electrochemically-exfoliated graphene sheets

A Quasi‐Solid‐State Sodium‐Ion Capacitor with High Energy Density

A Quasi-Solid-State Li-Ion Capacitor Based on Porous TiO 2 Hollow Microspheres Wrapped with Graphene Nanosheets.

A Quasi-Solid-State Li-Ion Capacitor Based on Porous TiO2 Hollow Microspheres Wrapped with Graphene Nanosheets

Peapod-Like Li3vo4/N-Doped Carbon Nanowires with Pseudocapacitive Properties As Advanced Materials for High-Energy Lithium-Ion Capacitors

Hybrid Lithium-Ion Capacitors with Asymmetric Graphene Electrodes

A Quinone-Amine Coupling Route to Interwoven Heterodiatomic Carbon Nanofiber Networks with Fast and Durable Charge Storage

High energy density Li-ion capacitor assembled with all graphene-based electrodes

Hierarchically Porous Li3VO4/C Nanocomposite As an Advanced Anode Material for High-Performance Lithium-Ion Capacitors

3D porous Li3VO4@C composite anodes with ultra-high rate capacity for lithium-ion capacitors

All Graphene Lithium Ion Capacitor with High-Energy-Power Density Performance

Towards Ultrahigh Volumetric Capacitance: Graphene Derived Highly Dense but Porous Carbons for Supercapacitors

A laser synthesis of vanadium oxide bonded graphene for high-rate supercapacitors

Coupled and decoupled hierarchical carbon nanomaterials toward high-energy-density quasi-solid-state Na-Ion hybrid energy storage devices

Carbon Nanowires: Peapod-like Li3 VO4 /N-Doped Carbon Nanowires with Pseudocapacitive Properties As Advanced Materials for High-Energy Lithium-Ion Capacitors (adv. Mater. 27/2017)

Three-dimensional graphitized carbon nanovesicles for high-performance supercapacitors based on ionic liquids.

Compressing Carbon Nanocages by Capillarity for Optimizing Porous Structures toward Ultrahigh-Volumetric-Performance Supercapacitors.

3D CNTs/graphene network conductive substrate supported MOFs-derived CoZnNiS nanosheet arrays for ultra-high volumetric/gravimetric energy density hybrid supercapacitor

Nitrogen-enriched graphene framework from a large-scale magnesiothermic conversion of CO2 with synergistic kinetics for high-power lithium-ion capacitors

Achieving Ultrahigh Volumetric Energy Storage by Compressing Nitrogen and Sulfur Dual‐Doped Carbon Nanocages via Capillarity