Abstract:Recently, a new kind of optical zooming technique in which no moving elements are involved has been paid much attention. The elimination of moving elements makes optical zooming suitable for applications which has exacting requirements in space, power cost and system stability. The mobile phone and the space-borne camera are two typical examples. The key to realize non-moving elements optical zooming lies in the introduction of variable curvature mirror (VCM) whose radius of curvature could be changed dynamically. When VCM is about to be used to implement optical zoom imaging, two characteristics should be ensured. First, VCM has to provide large enough saggitus variation in order to obtain a big magnification ratio. Second, after the radius of curvature has been changed, the corresponding surface figure accuracy should still be maintained superior to a threshold level to make the high quality imaging possible. In this manuscript, based on the elasticity theory, the physical model of the annular force based variable curvature mirror is established and numerically analyzed. The results demonstrate that when the annular force is applied at the half-the-aperture position, the actuation force is reduced and a smaller actuation force is required to generate the saggitus variation and thus the maintenance of surface figure accuracy becomes easier during the variation of radius of curvature. Besides that, a prototype VCM, whose diameter and thickness are 100mm and 3mm respectively, have been fabricated and the maximum saggitus variation that could be obtained approaches more than 30 wavelengths. At the same time, the degradation of surface figure accuracy is weakly correlated to the curvature radius variation. Keywords: optical zooming; variable curvature mirror; surface figure accuracy; saggitus

P-27: an Optical Zoom Method Based on Spatial Light Modulator

Zoom Optical System Using Tunable Polymer Lens

3D fluorescence emission difference microscopy based on spatial light modulator

An Optical Zoom System Based on Tunable Lens with Polymer Membrane and Multilayered Structure

Wavefront Modulation with Spatial Light Modulator for Fourier Ptychographic Microscopy

Shift-photography-assisted Image Super-Resolution for Optical Zooming System Based on Alvarez Lenses

Design of a Compact Varifocal Panoramic System Based on the Mechanical Zoom Method.

Mathematical Modeling and Implementation of a Panoramic Zoom System Without Central Blind Area

Zoom Imaging System Using Liquid Crystal Lens Array

Lensless coherent diffraction imaging based on spatial light modulator with unknown modulation curve

Annular Force Based Variable Curvature Mirror Aiming to Realize Non-Moving Element Optical Zooming

The design method of off-axis reflective stabilized zoom system based on deformable mirrors

Synthetic System Design Method for Off-Axis Stabilized Zoom Systems with a High Zoom Ratio.

Using the Spatial Light Modulator As a Binary Optical Element: Application to Spatial Beam Shaping for High-Power Lasers.

Multifocal Axial Confocal Microscopic Scanning with a Phase-Only Liquid Crystal Spatial Light Modulator

Optical Design and Optimization of a Micro Zoom System with Liquid Lenses

Quantitative Optic Experiments of Diffraction and Interference Based on Spatial Light Modulator and CCD Camera

Zoom System Realized Using Liquid Crystal Lenses

High-speed programmable lithium niobate thin film spatial light modulator

Design of a small non-displacement zoom optical system based on Gaussian brackets and traversal ideation

Off-axis Zoom Optical Systems Based on Mirror Rotation and Their Design Method