Anatase Mg0.05Ta0.95O1.15N0.85: a Novel Photocatalyst for Solar Hydrogen Production

Honglin Gao,Meiming Zhao,Shicheng Yan,Peng Zhou,Zeyan Li,Zhigang Zou,Qingju Liu

DOI: https://doi.org/10.1039/c6ra17152d

IF: 4.036

2016-01-01

RSC Advances

Abstract:Anatase Mg0.05Ta0.95O1.15N0.85, exhibiting a narrow band gap for solar hydrogen, is a promising visible-light-response photocatalyst for photocatalytic or photoelectrochemical water splitting.

What problem does this paper attempt to address?

Anatase Mg0.05Ta0.95O1.15N0.85: a novel photocatalyst for solar hydrogen production

Honglin Gao,Meiming Zhao,Shicheng Yan,Peng Zhou,Zeyan Li,Zhigang Zou,Qing-Ju Liu

DOI: https://doi.org/10.1039/C6RA17152D

IF: 4.036

2016-01-01

RSC Advances

Abstract:Anatase Mg0.05Ta0.95O1.15N0.85, exhibiting a narrow band gap for solar hydrogen, is a promising visible-light-response photocatalyst for photocatalytic or photoelectrochemical water splitting. The excellent photocatalytic activity can be attributed to the satisfying light absorption and electron–hole separation rate.
ChemInform Abstract: Anatase Mg0.05Ta0.95O1.15N0.85: A Novel Photocatalyst for Solar Hydrogen Production.

Honglin Gao,Meiming Zhao,Shicheng Yan,Peng Zhou,Zeyan Li,Zhigang Zou,Qingju Liu

DOI: https://doi.org/10.1002/chin.201648010

2016-01-01

ChemInform

Abstract:AbstractThe title catalyst is prepared in two steps involving the preparation of Mg0.05Ta0.95O2.425 via a modified Pechini method by combining solutions of MgCl2 and TaCl5 in EtOH and citric acid and subsequent addition of ethylene glycol (150 °C).
Surface Energy-Driven Solution Epitaxial Growth of Anatase TiO2 Homostructures for Overall Water Splitting

Shi Li,Luoyuan Ruan,Shanpeng Wang,Zhiyu Wang,Zhaohui Ren,Gaorong Han

DOI: https://doi.org/10.1016/j.jmst.2020.01.038

2020-01-01

Journal of Material Science and Technology

Abstract:Titanium dioxide (TiO2) has been extensively investigated as a photocatalyst for water splitting to produce H-2. However, an overall water splitting by using anatase TiO2 is extremely difficult due to the short lifetime of holes. In this work, we propose that a surface energy decrease from {001} to {101} of anatase TiO2 is able to drive an epitaxial growth. A novel anatase TiO2 homostructure has been successfully synthesized via a facile hydrothermal route, where {101} semi-pyramid nanoparticles epitaxially grew on the both sides of the {001} nanosheets. The epitaxial relationship between the nanoparticles and the nanosheets has been characterized to be {001}/1{001} of anatase TiO2. For the first time, it is interesting to find that the homostructure with 12 wt% of {101} semi-pyramid can significantly improve the H-2 evolution rate by nearly 5 times compared to the pure nanosheets under the ultraviolet irradiation. More importantly, such homostructure enables 10.78 mu mol g(-1) h(-1) of O-2 production whereas the pure nanosheets cannot evolve detectable O-2 gas. Meanwhile, the time-resolved photoluminescence analysis indicates that the mean lifetime of the holes is increased from 2.20 ns of the nanosheets to 3.59 ns of the homostructure, accounting for the observed overall water splitting. The findings suggest that constructing a homostructure by a surface energy strategy could be promising towards overall water splitting, which may be applicable to other photocatalytic materials. (C) 2020 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
Boosting Solar Photothermal Synergy for Efficient Overall Water Splitting Based on Mg, Al Codoped and Rh/Cr2O3/CoOOH Coloaded SrTiO3

Xuan Zhu,Yan Liu,Menglin Wang,Li Zhang,Qiaoli Li,Entao Zhang,Hongfen Mo,Yuan Gao,Chenyu Xu,Yanwei Zhang

DOI: https://doi.org/10.1016/j.cej.2023.147636

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:The synergistic coupling of light and heat in solar energy has attracted increasing research attention. In this work, both codoping and coloading were applied to SrTiO3-based catalysts to improve their solar photo and thermal conversion, respectively, and maximum productivities of 51.55 and 25.59 mmol.g(-1).h(-1) were achieved for H-2 and O-2 in photothermal synergistic water splitting. The yield of H-2 was nearly double that achieved via pure photocatalysis. In addition to many experiments and characterizations, DFT calculations were also performed to clarify the photothermal synergy. It was found that both the light absorbance and mobility of photoinduced carriers could be promoted by solar thermal effects in the material. Meanwhile, the energy barriers of the key steps were reduced with increasing temperature in the hydrogen production driven by solar photo effects. This work offers new ideas for designing catalysts for solar hydrogen production with photothermal synergistic strategies.
Solid-state Z-scheme assisted hydrated tungsten trioxide/ZnIn2S4 photocatalyst for efficient photocatalytic H2 production

Lin Ye,Zhenhai Wen,Haitao Huang

DOI: https://doi.org/10.1088/2752-5724/ac7faf

2022-07-10

Materials Futures

Abstract:Efficient water splitting for H2 evolution over semiconductor photocatalysts is highly attractive in the field of clean energy. It is of great significance to construct heterojunctions, among which the direct Z-scheme nanocomposite photocatalyst provides effective separation of photo-generated carriers to boost the photocatalytic performance. Herein, Z-scheme hydrated tungsten trioxide/ZnIn2S4 is fabricated via an in-situ hydrothermal method where ZnIn2S4 nanosheets are grown on WO3⋅xH2O. The close contact between WO3⋅0.5H2O and WO3⋅0.33H2O as well as ZnIn2S4 improve the charge carrier separation and migration in the photocatalyst, where the strong reducing electrons in the conduction band of ZnIn2S4 and the strong oxidizing holes in the valence band of WO3⋅0.33H2O are retained, leading to enhanced photocatalytic hydrogen production. The obtained WO3⋅xH2O/ZnIn2S4 shows an excellent H2 production rate of 7200 μmol g-1h-1, which is 11 times higher than pure ZnIn2S4. To the best of our knowledge, this value is higher than most of the WO3-based noble metal-free semiconductor photocatalysts. The improved stability and activity are attributed to the formation of the Z-scheme heterojunction, which can markedly accelerate the interfacial charge separation for surface reaction. This work offers a promising strategy towards the design of efficient Z-scheme photocatalyst to suppress electron-hole recombination and optimize redox potential.
A Convenient In Situ Preparation of Cu2ZnSnS4–Anatase Hybrid Nanocomposite for Photocatalysis/Photoelectrochemical Water-Splitting Hydrogen Production

Ke-Xian Li,Cai-Hong Li,Hao-Yan Shi,Rui Chen,Ao-Sheng She,Yang Yang,Xia Jiang,Yan-Xin Chen,Can-Zhong Lu

DOI: https://doi.org/10.3390/molecules29112514

IF: 4.6

2024-05-26

Molecules

Abstract:This study details the rational design and synthesis of Cu2ZnSnS4 (CZTS)-doped anatase (A) heterostructures, utilizing earth-abundant elements to enhance the efficiency of solar-driven water splitting. A one-step hydrothermal method was employed to fabricate a series of CZTS–A heterojunctions. As the concentration of titanium dioxide (TiO2) varied, the morphology of CZTS shifted from floral patterns to sheet-like structures. The resulting CZTS–A heterostructures underwent comprehensive characterization through photoelectrochemical response assessments, optical measurements, and electrochemical impedance spectroscopy analyses. Detailed photoelectrochemical (PEC) investigations demonstrated notable enhancements in photocurrent density and incident photon-to-electron conversion efficiency (IPCE). Compared to pure anatase electrodes, the optimized CZTS–A heterostructures exhibited a seven-fold increase in photocurrent density and reached a hydrogen production efficiency of 1.1%. Additionally, the maximum H2 production rate from these heterostructures was 11-times greater than that of pure anatase and 250-times higher than the original CZTS after 2 h of irradiation. These results underscore the enhanced PEC performance of CZTS–A heterostructures, highlighting their potential as highly efficient materials for solar water splitting. Integrating Cu2ZnSnS4 nanoparticles (NPs) within TiO2 (anatase) heterostructures implied new avenues for developing earth-abundant and cost-effective photocatalytic systems for renewable energy applications.

chemistry, multidisciplinary,biochemistry & molecular biology
Hydrogenated TiO2/SrTiO3 porous microspheres with tunable band structure for solar-light photocatalytic H2 and O2 evolution

Taoran Han,Yajie Chen,Guohui Tian,Wei Zhou,Yuting Xiao,Jinxin Li,Honggang Fu

DOI: https://doi.org/10.1007/s40843-016-5126-1

2016-11-29

Science China Materials

Abstract:The production of H2 and O2 from solar-light photocatalytic water splitting has attracted significant research attention as a clean and renewable source of energy. In this study, hydrogenated TiO2/SrTiO3 porous microspheres were prepared as a high-performance photocatalyst. Titanium glycerolate and then strontium complex precursors were first prepared via a two-step solvothermal process, then, after calcination in air and subsequent H2/Ar reduction treatments, hydrogenated TiO2/SrTiO3 porous microspheres with controllable defects and band positions were prepared. Several characterization techniques were used to demonstrate that the catalyst heterostructures, the oxygen-vacancy content, and the unique porous structures synergistically enhanced the visible-light harvesting abilities and photogenerated charge separation, and resulted in improved photocatalytic efficiency for H2 and O2 evolution. As expected, the optimum treatment conditions provided hydrogenated TiO2/SrTiO3 porous microspheres that showed excellent photocatalytic activity with H2 and O2 evolution rates of 239.97 and 103.79 μmol h−1 (50 mg catalyst, under AM 1.5 irradiation), respectively, which were ca. 5.9 and 6.6 times higher, respectively, than those of solid TiO2/SrTiO3 materials. Thus, this type of hydrogenated TiO2/SrTiO3 porous microsphere catalyst shows great potential as a photocatalyst for solar-energy conversion applications.

materials science, multidisciplinary
Enhanced Overall Water Splitting by a Zirconium-Doped TaON-Based Photocatalyst.

Y. Inoue,T. Hisatomi,J. Vequizo,Jiadong Xiao,Lihua Lin,Akira Yamakata,Mamiko Nakabayashi,K. Domen,S. Nishimae,Naoya Shibata,Huihui Li

DOI: https://doi.org/10.1002/anie.202116573

2022-02-19

Angewandte Chemie

Abstract:Solar-powered one-step-excitation overall water splitting (OWS) using semiconducting materials is a simple means of achieving scalable and sustainable hydrogen production. While tantalum oxynitride (TaON) is one of the few photocatalysts capable of promoting OWS via single-step visible light excitation, the efficiency of this process remains extremely poor. The present work employed 15 nm amorphous Ta 2 O 5 •3.3H 2 O nanoparticles as a new precursor together with Zr doping and an optimized nitridation duration to synthesize a TaON-based photocatalyst with reduced particle sizes and low defect densities. Upon loading with Ru/Cr 2 O 3 /IrO 2 cocatalysts, this material exhibited stoichiometric water splitting into hydrogen and oxygen, with an order of magnitude improvement in efficiency. Our findings demonstrate the importance of inventing/selecting the appropriate synthetic precursor and of defect control for fabricating active OWS photocatalysts.

Chemistry,Materials Science,Medicine,Environmental Science,Engineering
Promoted Interfacial Charge Transport and Separation of Size-Uniform Zn, Ni-Doped CdS-1T/2H O-MoS 2 Nanoassemblies for Efficient Visible-Light Photocatalytic Water Splitting

Haifeng Lin,Xiaowei Ma,Hui Wang,Bo Wang,Shao-Xiang Li,Xiujie Yi,Yan-Yan Li,Lei Wang

DOI: https://doi.org/10.1021/acs.cgd.0c01546

2021-01-19

Abstract:Producing solar fuels by photocatalysis has been of great interest in recent years. Nevertheless, developing noble-metal-free photocatalysts for efficient solar-to-fuel conversion still remains challenging now. Herein, size-uniform nanoassemblies constructed by ultra-small Zn, Ni-doped CdS nanocrystals and 1T/2H (∼67% 1T phase) oxygen-incorporated MoS2 (O-MoS2) nanosheets were obtained through an ultrasonic water-bath strategy combined with an electrostatic assembly process, which are highly active for visible-light photocatalytic H2 evolution reaction (HER), displaying a superior H2 formation rate of 112.78 mmol·g–1·h–1 (21 times that of Pt–CdS) and the corresponding apparent quantum efficiency (AQE) of 72.0% at 420 nm. The outstanding HER performance originates from the following aspects: First, the interfacial charge transfer and separation between CdS and O-MoS2 are dramatically boosted by the enlarged electron-transfer driving force and the prolonged carrier lifetime via Zn, Ni-doping. Besides, the defect-rich O-MoS2 nanosheets with 1T/2H mixed phases are provided with abundant active sites for H2 production. Moreover, the oxygen incorporation in MoS2 enhances the conductivity and lowers the energy barrier of H2 evolution. The results indicated in this work could offer new ideas for designing novel nanostructures to promote the conversion and utilization of solar energy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.cgd.0c01546?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.cgd.0c01546</a>.Zeta potentials; TEM images; XRD patterns; UV–vis absorption spectra; XPS spectrum; H2 evolution activities; effects of Ni-doping content and the sacrificial agent on H2 generation activity; cycling stability for H2 evolution; calculated band gap energies; BET surface areas; and comparison of H2 evolution activities (<a class="ext-link" href="/doi/suppl/10.1021/acs.cgd.0c01546/suppl_file/cg0c01546_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary,materials science,crystallography
Nanostructured Heterogeneous Photocatalysts for H2 Production Using Solar Energy

Zhaosheng Li,Zhigang Zou

DOI: https://doi.org/10.1504/ijnp.2011.040505

2011-01-01

International Journal of Nanoparticles

Abstract:Hydrogen is an ideal candidate for the replacement of fossil fuels, because it features high combustion energy and no environmental pollution. As a sustainable approach for new energy sources, photocatalytic hydrogen production utilising solar energy is a promising strategy for the world. Nanostructured heterogeneous photocatalysts have attracted intensive interest because of their large specific surface area and short distance for photoinduced carrier transport. This article briefly reviews the recent advances in nanostructured heterogeneous photocatalysts for hydrogen production.
The Roles of Surface Oxygen Vacancy over Mg4Ta2O9-x Photocatalyst in Enhancing Visible-Light Photocatalytic Hydrogen Evolution Performance

Entian Cui,Qiangqiang Meng,Chengyan Ge,Guiyun Yu,Guihua Hou,Ning Xu,Feng Zhang,Yuqi Wu

DOI: https://doi.org/10.1016/j.catcom.2017.09.018

IF: 3.51

2017-01-01

Catalysis Communications

Abstract:Extending the light absorption range of wide-band-gap semiconductor oxides is crucial to the effective solar-hydrogen energy conversion. Here, we introduced surface oxygen vacancies into Mg4Ta2O9 and constructed a narrow band-gap Mg4Ta2O9-x photocatalyst by a simple low temperature reduction method. The as-synthesized Mg4Ta2O9-x exhibits a significantly extended absorption edge in visible light range, which originates from the intermediate defect level band and electronic states created by introducing surface oxygen vacancy. With the same Pt loaded content (0.5wt%), the Pt-loaded Mg4Ta2O9-x exhibits the excellent photocatalytic stability and higher hydrogen evolution activity (4.42μmol·h−1) than the Pt-loaded Mg4Ta2O9 (0.14μmol·h−1) under visible light irradiation.
Enhanced Water‐Splitting Performance of Perovskite SrTaO2N Photoanode Film Through Ameliorating Interparticle Charge Transport

Yujiao Zhong,Zhaosheng Li,Xin Zhao,Tao Fang,Huiting Huang,Qinfeng Qian,Xiaofeng Chang,Peng Wang,Shicheng Yan,Zhentao Yu,Zhigang Zou

DOI: https://doi.org/10.1002/adfm.201603021

IF: 19

2016-01-01

Advanced Functional Materials

Abstract:Here SrTaO2N has been found to exhibit photoelectrochemical water splitting, with a theoretical solar‐to‐hydrogen efficiency of 14.4%. Ameliorating the interparticle charge transport by H2 annealing, the solar photocurrent of the SrTaO2N(H) granular film at 1.23 V versus reversible hydrogen electrode (RHE) is increased by ≈250% in comparison with the SrTaO2N film. Using an aberration corrected scanning transmission electron microscope and super‐X energy dispersive spectroscopy, the atomic scale observation has proved a decrease of oxygen concentrations in the surface of SrTaO2N(H) particle, which may allow its electrical conductivity to be increased from 0.77 × 10−6 to 2.65 × 10−6 S cm−1 and therefore the charge separation efficiency has been greatly increased by ≈330%. After being modified by Co–Pi water oxidation catalyst, the SrTaO2N(H) photoanode shows a solar photocurrent of 1.1 mA cm−2 and an incident photo‐to‐current efficiency value of ≈20% at 400–460 nm and 1.23 V versus RHE, which suggests that it is a new promising photoanode material for solar water splitting.
A Novel Visible‐Light‐Responsive Semiconductor ScTaO4−xNx for Photocatalytic Oxygen and Hydrogen Evolution Reactions

Lang Pei,Hong Cai,Hao Jin,Taozhu Li,Heng Zhu,Yongjun Yuan,Jiasong Zhong,Shicheng Yan,Zhigang Zou

DOI: https://doi.org/10.1002/cctc.202001341

IF: 4.5

2020-01-01

ChemCatChem

Abstract:Screening of visible-light-responsive semiconductor photocatalysts is a significant target for solar water splitting systems. Herein, a newly designed Ta-based oxynitride, namely ScTaO4-xNx, was successfully synthesized via nitrogen doping of ScTaO(4)oxide precursors at 1273 K under NH(3)flow. The ScTaO(4-x)N(x)photocatalyst, with a strong band-to-band visible light absorption as far as 540 nm, can be employed for both water oxidation and reduction half-reactions under visible light illumination, demonstrating great potential for photocatalytic water splitting.
Nanostructured materials for photocatalytic hydrogen production

Jiefang Zhu,Michael Zäch

DOI: https://doi.org/10.1016/j.cocis.2009.05.003

2009-08-01

Abstract:Photocatalytic hydrogen (H2) production represents a very promising but challenging contribution to a clean, sustainable and renewable energy system. The photocatalyst material plays a key role in photocatalytic H2 production, and it has proven difficult to obtain corrosion resistant, chemically stable, visible light harvesting and highly efficient photocatalysts, which have their band edges matching the O2 and H2 production levels. Nanoscience and nanotechnology are opening a new vista in the development of highly active, nanostructured photocatalysts with large surface areas for optimized light absorption, minimized distances (or times) for charge-carrier transport, and further favorable properties. Our focus here is on recently developed nanostructured photocatalysts. In particular, the particle size, chemical composition (including dopants), microstructure, crystal phase, morphology, surface modification, bandgap and flat-band potential of the nanophotocatalysts have shown a visible effect on photocatalytic H2 production rates, which may be further increased by adding sensitizers, cocatalysts or scavengers. Finally, potential directions required to push this research field a step further are highlighted.

chemistry, physical
Zinc-vacancy mediated Z-scheme photocatalyst of ZnS/LaTiO 2 N for hydrogen evolution under visible-light

Jiaqi Yu,Jinwei Qi,Nansong Lin,Zizhong Zhang,Tao Ji,Wenyue Su

DOI: https://doi.org/10.1016/j.jallcom.2023.173301

IF: 6.2

2024-01-05

Journal of Alloys and Compounds

Abstract:Solar-powered photocatalytic water splitting for hydrogen evolution presents a promising solution to the energy crisis and contemporary environmental challenges. Herein, a Z-scheme ZnS/LaTiO 2 N heterojunction composite, incorporating zinc vacancies, has been successfully synthesized to enable photocatalytic hydrogen evolution under visible-light illumination. The optimized ZnS(V Zn )/LaTiO 2 N composite demonstrates a hydrogen evolution activity 13 times higher than that of individual ZnS(V Zn ). The heterojunction between ZnS and LaTiO 2 N, in conjunction with zinc vacancies, expands the photoresponse spectrum and facilitates the spatial separation and transfer of photogenerated carriers. Consequently, this synergy significantly enhances the performance of photocatalytic hydrogen evolution. The collaborative action of the Z-scheme heterojunction and zinc vacancies paves the way for innovative approaches in designing future high-efficiency photocatalysts.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Enhanced Visible-Light-induced Hydrogen Evolution from Water in a Noble-Metal-free System Catalyzed by ZnTCPP-MoS2/TiO2 Assembly

Yongjun Yuan,Hongwei Lu,Zhenguo Ji,Jiasong Zhong,Mingye Ding,Daqing Chen,Yonghui Li,Wenguang Tu,Dapeng Cao,Zhentao Yu,Zhigang Zou

DOI: https://doi.org/10.1016/j.cej.2015.04.015

IF: 15.1

2015-01-01

Chemical Engineering Journal

Abstract:Titanium dioxide is an excellent photocatalyst for photocatalytic hydrogen production but its application is limited by its poor visible light harvesting capability. In this work, a visible-light-responsive photocatalytic hydrogen production system was developed using Zn(II)-5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (ZnTCPP) sensitized MoS2/TiO2 (ZnTCPP-MoS2/TiO2) as photocatalysts. The as-prepared composite photocatalysts have apparent adsorption in visible light region, making them active for visible-light-induced hydrogen evolution. Even without noble metals, ZnTCPP-MoS2/TiO2 photocatalyst loaded with 1.00wt% MoS2 shows the highest H2 production rate of 10.2μmolh−1, and the turnover number (TON) with respect to ZnTCPP dye reaches 261 after visible light irradiation for 12h. The highest H2 production rate of ZnTCPP-MoS2/TiO2 is much higher than that of ZnTCPP-Pt/TiO2, suggesting that MoS2 can act as a more effective cocatalyst than the commonly used platinum. This study presents a noble-metal-free and visible-light-responsive TiO2-based photocatalyst for solar-to-hydrogen conversion.
Concentrated Solar Light Photoelectrochemical Water Splitting for Stable and High‐Yield Hydrogen Production

Wan Jae Dong,Zhengwei Ye,Songtao Tang,Ishtiaque Ahmed Navid,Yixin Xiao,Bingxing Zhang,Yuyang Pan,Zetian Mi

DOI: https://doi.org/10.1002/advs.202309548

IF: 15.1

2024-03-11

Advanced Science

Abstract:Photoelectrodes consisting of Pt nanoparticles (NPs) loaded on single crystal GaN nanowires grown on n+‐p Si wafers reveal high hydrogen evolution activity, productivity, and stability under concentrated solar light. Lattice alignment between Pt and GaN at the heterointerface stably anchors the cocatalysts during the harsh reaction conditions. Repeated redeposition of Pt NPs greatly improves the performance and stability for over 1500 h. Photoelectrochemical water splitting is a promising technique for converting solar energy into low‐cost and eco‐friendly H2 fuel. However, the production rate of H2 is limited by the insufficient number of photogenerated charge carriers in the conventional photoelectrodes under 1 sun (100 mW cm−2) light. Concentrated solar light irradiation can overcome the issue of low yield, but it leads to a new challenge of stability because the accelerated reaction alters the surface chemical composition of photoelectrodes. Here, it is demonstrated that loading Pt nanoparticles (NPs) on single crystalline GaN nanowires (NWs) grown on n+‐p Si photoelectrode operates efficiently and stably under concentrated solar light. Although a large number of Pt NPs detach during the initial reaction due to H2 gas bubbling, some Pt NPs which have an epitaxial relation with GaN NWs remain stably anchored. In addition, the stability of the photoelectrode further improves by redepositing Pt NPs on the reacted Pt/GaN surface, which results in maintaining onset potential >0.5 V versus reversible hydrogen electrode and photocurrent density >60 mA cm−2 for over 1500 h. The heterointerface between Pt cocatalysts and single crystalline GaN nanostructures shows great potential in designing an efficient and stable photoelectrode for high‐yield solar to H2 conversion.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Z-scheme G-C3n4-aq-moo3 Photocatalyst with Unique Electron Transfer Channel and Large Reduction Area for Enhanced Sunlight Photocatalytic Hydrogen Production

Xue Ma,Guowei Wang,Lifan Qin,Jue Liu,Bing Li,Yuanan Hu,Hefa Cheng

DOI: https://doi.org/10.1016/j.apcatb.2021.120025

2021-01-01

Abstract:The transfer rate of photo-generated electrons is a critical factor that determines the photocatalytic efficiency of Z-scheme photocatalytic systems. Here, a novel Z-scheme g-C3N4-AQ-MoO3 photocatalyst with anthraquinone (AQ) serving as an e- transfer channel for hydrogen production was proposed. Its enhanced photocatalytic activity is due to the accelerated transfer of e(-) in the form of charge inside AQ, which also suppresses the recombination of photo-generated e(-) and h(+). In addition, the reduction area is significantly increased by the exfoliation of g-C3N4 into thin layers. Due to the synergistic effect of rapid e(-) transfer and large reduction area, Z-scheme g-C3N4-AQ-MoO3 has a high hydrogen production efficiency that can reach 2018 mu mol/g with the presence of triethanolamine as a hole sacrificial agent after 180 min of simulated sunlight illumination. This work provides a new strategy to design and develop Z-scheme photocatalytic systems with excellent electron migration rates and high charge separation efficiency.
Hydrogenated anatase: Strong photocatalytic H2 evolution without the use of a co-catalyst

Ning Liu,Christopher Schneider,Detlef Freitag,Umamaheswari Venkatesan,V. R. Reddy Marthala,Martin Hartmann,Benjamin Winter,Erdmann Spiecker,Eva Zolnhofer,Karsten Meyer,Patrik Schmuki

DOI: https://doi.org/10.1002/anie.201408493

2016-10-20

Abstract:In the present work we show, how a high pressure hydrogenation of commercial anatase or anatase/rutile powder can create a photocatalyst for hydrogen evolution that is highly effective and stable without the need of any additional co-catalyst. This activation effect can not be observed for rutile. For anatase/rutile mixtures, however, a strong synergistic effect is found (similar to findings commonly observed for noble metal decorated TiO2). ESR measurements indicate the intrinsic co-catalytic activation of anatase TiO2 to be due to specific defect centers formed during hydrogenation.

Chemical Physics
A thin-film silicon based photocathode with a hydrogen doped TiO2 protection layer for solar hydrogen evolution

Junhui Liang,Hairen Tan,Min Liu,Bofei Liu,Ning Wang,Qixing Zhang,Ying Zhao,Arno H. M. Smets,Miro Zeman,Xiaodan Zhang

DOI: https://doi.org/10.1039/c6ta07701c

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:There is a trade-off relationship between activity and stability in silicon based monolithic photovoltaic electrochemical (PV–EC) systems, especially when a thick TiO2 protection layer (preferred to enhance the chemical stability in the electrolyte) is used.

Anatase Mg0.05Ta0.95O1.15N0.85: a Novel Photocatalyst for Solar Hydrogen Production

Anatase Mg0.05Ta0.95O1.15N0.85: a novel photocatalyst for solar hydrogen production

ChemInform Abstract: Anatase Mg0.05Ta0.95O1.15N0.85: A Novel Photocatalyst for Solar Hydrogen Production.

Surface Energy-Driven Solution Epitaxial Growth of Anatase TiO2 Homostructures for Overall Water Splitting

Boosting Solar Photothermal Synergy for Efficient Overall Water Splitting Based on Mg, Al Codoped and Rh/Cr2O3/CoOOH Coloaded SrTiO3

Solid-state Z-scheme assisted hydrated tungsten trioxide/ZnIn2S4 photocatalyst for efficient photocatalytic H2 production

A Convenient In Situ Preparation of Cu2ZnSnS4–Anatase Hybrid Nanocomposite for Photocatalysis/Photoelectrochemical Water-Splitting Hydrogen Production

Hydrogenated TiO2/SrTiO3 porous microspheres with tunable band structure for solar-light photocatalytic H2 and O2 evolution

Enhanced Overall Water Splitting by a Zirconium-Doped TaON-Based Photocatalyst.

Promoted Interfacial Charge Transport and Separation of Size-Uniform Zn, Ni-Doped CdS-1T/2H O-MoS 2 Nanoassemblies for Efficient Visible-Light Photocatalytic Water Splitting

Nanostructured Heterogeneous Photocatalysts for H2 Production Using Solar Energy

The Roles of Surface Oxygen Vacancy over Mg4Ta2O9-x Photocatalyst in Enhancing Visible-Light Photocatalytic Hydrogen Evolution Performance

Enhanced Water‐Splitting Performance of Perovskite SrTaO2N Photoanode Film Through Ameliorating Interparticle Charge Transport

A Novel Visible‐Light‐Responsive Semiconductor ScTaO4−xNx for Photocatalytic Oxygen and Hydrogen Evolution Reactions

Nanostructured materials for photocatalytic hydrogen production

Zinc-vacancy mediated Z-scheme photocatalyst of ZnS/LaTiO 2 N for hydrogen evolution under visible-light

Enhanced Visible-Light-induced Hydrogen Evolution from Water in a Noble-Metal-free System Catalyzed by ZnTCPP-MoS2/TiO2 Assembly

Concentrated Solar Light Photoelectrochemical Water Splitting for Stable and High‐Yield Hydrogen Production

Z-scheme G-C3n4-aq-moo3 Photocatalyst with Unique Electron Transfer Channel and Large Reduction Area for Enhanced Sunlight Photocatalytic Hydrogen Production

Hydrogenated anatase: Strong photocatalytic H2 evolution without the use of a co-catalyst

A thin-film silicon based photocathode with a hydrogen doped TiO<sub>2</sub> protection layer for solar hydrogen evolution