Abstract:The complexity of the urban environment and traffic characteristics give the dynamic simulation of traffic noise practical significances. A new dynamic modeling of traffic noise in both indoor and outdoor environments was proposed. First, considering multiple reflections and diffractions, 3D ray tracing method subordinated to space partitioning was used to simulate sound propagations. Then, microscopic traffic simulation which provided time-variant parameters for the vehicle emission model, was used to gain spatial and temporal outputs. Space partitioning improved the computational efficiency by transforming the global search into a local one in complex sound propagation simulation. A case was validated the accuracy, as the indoor and outdoor average errors of equivalent sound levels (L-eq) were respectively 1.68 dB and 1.65 dB. Moreover, less than 1.5 dB errors of statistical indicators (L-90, L-50 and L-10) and well coincidence of statistical distributions of the instantaneous sound pressure levels (L-eq,L-1s) illustrated a good performance on dynamic simulation. Finally, the effects of vehicle speed, proportion of heavy vehicles and signal phase on traffic noise were discussed. The results showed that 1) Indoor/outdoor L-eq had logarithmic relationships with vehicle speed. 2) It presented quadratic polynomial relationships between Leg and proportion of heavy vehicles. 3) Dynamic results showed that noise variations were consistent with the changes of the signal period, and it revealed different noise distributions with various vehicle statuses; upstream average L-eq was 3.3 dB louder than the downstream one with vehicle acceleration; average L-eq,L-1s during the red light was 20 dB softer than it during the green light. (C) 2017 Elsevier Ltd. All rights reserved.

Three-Dimensional Traffic Noise Propagation to Buildings with Atriums or Annexes by Using the Beam Tracing Method

The 3D Attenuation Calculation of Traffic Noise among Building Groups by Using Beam Tracing Method

Simulation and Analysis of Road Traffic Noise among Urban Buildings Using Spatial Subdivision-Based Beam Tracing Method

Dynamic Simulation of Traffic Noise by Applying Ray Tracing Method Based on Indoor Space Partitioning

Accuracy and Efficiency Analysis of a Road Traffic Noise Propagation Calculation Method Based on Beam Tracing

Simulation of Traffic Noise Both Indoors and Outdoors Based on an Integrated Geometric Acoustics Method

Areawide Dynamic Traffic Noise Simulation in Urban Built-Up Area Using Beam Tracing Approach

A Modified 3d Algorithm for Road Traffic Noise Attenuation Calculations in Large Urban Areas

Dynamic Modeling of Road Traffic Noise Around Buildings in an Urban Area

Dynamic Modeling of Traffic Noise in Both Indoor and Outdoor Environments by Using A Ray Tracing Method

Localized KD-Tree Accelerated Beam Tracing Method for Modelling Complex Urban Environment Propagation

A Ray Tracing Method Based on Indoor Space Partitioning

Comparison of Two Sound Attenuation Algorithms Using Beam Tracking Method Based on Different Spatial Subdivisions

Simulation Model of Sound Field in Street Space Caused by Noise Transmitted from Bordering Large Workshop Buildings

Predicting the Temperature Distribution of a Non-Enclosed Atrium and Adjacent Zones Based on the Block Model

An Efficient and Accurate OpenMP-MPI Based 3D Beam Tracing Method for Radio Propagation Simulation in Large Scale Urban Environments

Computer Simulation of Traffic Noise in Rectangular Cross-Section Tunnel

A Novel 3d Ray-Tracing Acceleration Technique Based On Kd-Tree Algorithm For Radio Propagation Predictionin Complex Indoor Environment

Analysis of the effect of traffic noise on the indoor environment in building

Dynamic Traffic Noise Simulation at A Signalized Intersection among Buildings

A Simulation of Traffic Noise Emissions at a Roundabout Based on a Cellular Automaton Model