Electrochemical construction of three-dimensional porous Mn<sub>3</sub>O<sub>4</sub> nanosheet arrays as an anode for the lithium ion battery

Xiao-Yong Fan,Yu Cui,Pan Liu,Lei Gou,Lei Xu,Dong-Lin Li

DOI: https://doi.org/10.1039/c6cp03374a

IF: 3.3

2016-01-01

Physical Chemistry Chemical Physics

Abstract:The architectures of 3D pores, self-supported structure and nanosheet arrays synergistically improve the electrochemical performance of Mn3O4.

What problem does this paper attempt to address?

Electrochemical Construction Of Three-Dimensional Porous Mn3o4 Nanosheet Arrays As An Anode For The Lithium Ion Battery

Xiao-Yong Fan,Yu Cui,Pan Liu,Lei Gou,Lei Xu,Dong-Lin Li

DOI: https://doi.org/10.1039/c6cp03374a

IF: 3.3

2016-01-01

Physical Chemistry Chemical Physics

Abstract:Three-dimensional (3D) porous Mn3O4 nanosheet arrays were constructed via an electrodeposition followed by high temperature annealing using 3D porous Cu, prepared by a facile electroless plating method, as the substrate. The 3D pores and voids between the nanosheet arrays were able to provide rapid ion transfer channels, as well as accommodating the volumetric changes of Mn3O4 during the electrochemical cycling. Electrons can directly exchange between the substrate and the nanosheet units, avoiding curving and the long transfer distance in conventional electrodes constructed using casting technology. Furthermore, the nanosheets were transformed into the architecture with smaller sub-nanosheets on the pristine nanosheets after 1 cycle, facilitating ion transferring, and were thoroughly transformed into smaller sub-nanosheets after 1000 cycles but without obvious exfoliation, assuring good electrical contact between the active particles and substrate. Based on the above unique characteristics, the 3D porous Mn3O4 nanosheet arrays could be directly used as a binder-free and conductive-agent-free electrode to deliver ultrahigh electrochemical performance that is much better than achieved in previous reports. The first reversible capacity was 1166.3 mA h g(-1) and remained 667.9 mA h g(-1) after 1000 cycles at 1.0 A g(-1). Also, the reversible capacities at high current densities of 10.0 A g(-1) and 20.0 A g(-1) remained high at 416.1 and 216.7 mA h g(-1), respectively.
Electrospinning-based Construction of Porous Mn3O4/CNFs As Anodes for High-Performance Lithium-Ion Batteries

Ye Li,Yan Song,He Wang,Wensheng Yu,Jinxian Wang,Xiangting Dong,Guixia Liu,Qianli Ma

DOI: https://doi.org/10.1039/c9nj06296c

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:Porous one-dimensional Mn3O4/CNFs composites are fabricated and used as anode materials for Li-ion batteries; they exhibit excellent electrochemical performance.
Synthesis of nanoporous three-dimensional current collector for high-performance lithium-ion batteries

Jiazheng Wang,Ning Du,Zunqing Song,Hao Wu,Hui Zhang,Deren Yang

DOI: https://doi.org/10.1039/c3ra22369h

IF: 4.036

2013-01-01

RSC Advances

Abstract:We demonstrate the synthesis of Cu nanoporous three-dimensional current collector via a simple template-assisted method. Silicon, germanium and tin are selected as the anode materials to illustrate the enhanced performance. When tested as electrodes in lithium-ion batteries, they all show high reversible capacity with excellent rate performance. The three-dimensional nanostructure allows for good accommodation of the volume change and ensures a large surface area contact with active material and enhances the conductivity, which should be responsible for the enhanced performance.
Three dimensional hierarchically porous crystalline MnO2 structure design for a high rate performance lithium-ion battery anode

Shikun Liu,Xusong Liu,Jiupeng Zhao,Zhongqiu Tong,Jing Wang,Xiaoxuan Ma,Caixia Chi,Dapeng Su,Xiaoxu Liu,Yao Li

DOI: https://doi.org/10.1039/c6ra16430g

IF: 4.036

2016-01-01

RSC Advances

Abstract:A reasonably designed anode of hierarchically porous crystalline manganese dioxide on nickel foam has been successfully synthesized by facile anodic electrochemical deposition in combination with heat treatment. The three dimensional structure avoids the application of binder and conductive additives. The Ni foam provides a highly electronically conductive network in conjunction with a large surface area to support well contacted MnO2 nanoparticles and effectively increases the mechanical strength of the MnO2 anode as well as suppresses the aggregation of MnO2 nanoparticles during discharge/charge processes. The hierarchical pores composed of a large amount of macropores and mesopores can not only accommodate the volume change of MnO2 nanoparticles during Li ion insertion/extraction, but also accelerate the penetration of electrolyte and promise fast transport and intercalation kinetics of Li ions. The crystalline MnO2 anode exhibits a higher electrochemical performance than the amorphous one. As a result, the hierarchically porous crystalline MnO2 anode shows a long cycling life of 778.0 mA h g(-1) after 200 cycles at a current density of 0.4 A g(-1) and high-rate capability of up to 82% capacity retention even after the current density increases 20 times from 0.1 to 2.0 A g(-1).
Three-dimensional Porous Carbon Nanosheet Networks Anchored with Cu6Sn5@carbon As a High-Performance Anode Material for Lithium Ion Batteries

Zhiyuan Wang,Shaohua Luo,Fang Chen,Dan Wang,Yanguo Liu,Xiwei Qi,Chunsheng Shi,Naiqin Zhao

DOI: https://doi.org/10.1039/c6ra04778e

IF: 4.036

2016-01-01

RSC Advances

Abstract:A three-dimensional porous carbon nanosheet networks anchored with Cu6Sn5@carbon nanoparticles as a high-performance anode of lithium ion batteries are synthesized.
Facile Template-Free Synthesis Of 3d Porous Mno/C Microspheres With Controllable Pore Size For High-Performance Lithium-Ion Battery Anodes

kai su,chao wang,honggang nie,yan guan,feng liu,jitao chen

DOI: https://doi.org/10.1039/c4ta01587h

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:3D porous MnO/C anode materials with controllable pore size are rationally designed and synthesized by a facile template-free strategy. The MnxZn1-xCO3 (x = 1, 2/3, 1/2 and 1/3) precursors were prepared by an ultrasonic-assisted co-precipitation method, and then heated with glucose in a reducing atmosphere to obtain a series of MnO/C microspheres through topochemical conversion. These MnO/C microspheres consist of nanosized primary particles and have interconnected pore architectures with high specific surface areas of up to 111.4 m(2) g(-1). Adjusting the Zn/Mn molar ratio of MnxZn1-xCO3 can easily tune the pore size of the MnO/C materials from 14.9 nm to 31.8 nm. Electrochemical performances of the MnO/C materials were found to be strongly correlated with their porous structures. The MnO/C material with optimized pore size exhibits a high reversible capacity (846 mA h g(-1) at 100 mA g(-1)), superior rate capability (406 mA h g(-1) at 3200 mA g(-1)) and excellent cycling stability. This strategy can be extended to prepare other candidate electrode materials.
Rational design of 3D net-like carbon-based Mn3O4 anode material with an enhanced lithium storage performance

Xue Li,Wence Yue,Jie Zhao,Yujiao Zhang,Ning Gao,Dan Feng,Bin Wu,Bao Wang,Wen-biao Li,Yi-bo Gao

DOI: https://doi.org/10.1039/d2nj01618d

IF: 3.3

2022-06-09

New Journal of Chemistry

Abstract:An optimized structure design of three-dimensional (3D) net-like carbon based Mn3O4 (Mn3O4/CP) composite was realized based on the theory of explosive nucleation and in situ growth. Mn3O4/CP composite has been successfully prepared on a large scale with the filter paper adsorbed with manganese (II) oleate served as the raw materials by a facile thermal decomposition route. The obtained Mn3O4/CP composite shows a reversible capacity of 1005 mAh/g after 90 cycles at a current density of 100 mA g-1, with a remarkably enhanced rate performance and an excellent cycling stability compared to the pure Mn3O4 nanostructure compared to the pure Mn3O4 nanostructure which lose most of the capacity within 10 cycles. Even at the current density of 2000 mA/g, the specific capacity of Mn3O4/CP composite is still as high as 486 mAh/g, which is much higher than that of pure Mn3O4 (38 mAh/g) and the carbon materials (111 mAh/g). The enhancement of the electrochemical performance could be attributed to the synergy of Mn3O4 enwrapped with the 3D conductive carbon network, thus making it a promising anode material for large-scale energy storage applications. Moreover, this facile and effective synthetic strategy can be further explored as a universal approach for the rapid synthesis of other transition metal oxides and carbon hybrids with subtle structure engineering.

chemistry, multidisciplinary
Ultrathin NiO Nanosheets Anchored on a Highly Ordered Nanostructured Carbon As an Enhanced Anode Material for Lithium Ion Batteries

Zhaoyang Fan,Jin Liang,Wei Yu,Shujiang Ding,Shaodong Cheng,Guang Yang,Yonglong Wang,Yingxin Xi,Kai Xi,R. Vasant Kumar

DOI: https://doi.org/10.1016/j.nanoen.2015.06.009

IF: 17.6

2015-01-01

Nano Energy

Abstract:CMK-3, a member of the ordered mesoporous carbon materials, has been considered as one of the most leading electrode materials due to its high conductivity, uniform diameter, an interconnected mesoporous structure with a large pore volume and a highly ordered hexagonal morphology. However, the relatively low specific capacity of CMK-3 can be substantially improved by hybridizing with NiO. Herein, we demonstrate a simple precipitation method followed by a calcination treatment to fabricate ultrathin NiO nanosheets (NiO-NSs) on highly ordered CMK-3 such that the final electrode composite displays a novel nanosheets-mesoporous structure. The as-synthesized electrode composite exhibits excellent electrochemical stability and high rate performance, which can be ascribed to the hybrid structures of NiO-NSs and the conductive mesoporous matrix. The porous ultrathin NiO-NSs and the inner channels of CMK-3 are beneficial for the lithium ion diffusion while the conductive interconnected CMK-3 network is favorable to fast electron transfer. The suggested nanosheet-mesoporous structure provides a promising innovative design for battery electrodes with improved electrochemical performance.
Construction of self-supporting macro-porous MnO@CNT anode for stable Li-ion battery

Jin Wang,Wei Yue,Tian Gan,Yunlong Liao,Fugen Wu,Zhiping Lin,Guo Ai

DOI: https://doi.org/10.1016/j.materresbull.2023.112407

IF: 5.6

2023-06-20

Materials Research Bulletin

Abstract:Nano-structure design and carbonous coupling are the most popular strategies to tackle the shortcomings of MnO-based anode materials. Herein, a nano-hybrid MnO anode is constructed with a self-supported carbon nanotube (CNT) framework interlacing MnO nanoparticles, denoted as The CNT can spontaneously agglomerate and form a self-supported macro-porous sphere with interconnected CNT framework and abundant inner channels, which is beneficial for e − transport, Li + conduction, and kinetics propulsion. The macro-porous structure delivers abundant interior volume to limit the outer expansion of the anode, which effectively improves the solid electrolyte interface (SEI) stability, particle integrity, and cycling stability. Excellent cycling stability of over 750 cycling life and over 99% Coulombic efficiency can be achieved by the anode, which is demonstrated to be closely related to the multi-functionalities of the hybrid structure. Therefore, our work provides an effective design idea and mechanism investigation for the high-capacity manganese oxide-based anodes.

materials science, multidisciplinary
Synthesis and Electrochemical Properties of Manganese Oxides/Carbon-Nitrogen Three-Dimensional Networks Composite as an Anode Material for Lithium Ion Batteries

Yang Rong,Liu Xu-Wang,Peng Lu-Ming

DOI: https://doi.org/10.11862/CJIC.2017.025

2017-01-01

Chinese journal of inorganic chemistry

Abstract:Sesquioxide coated on melamine foams (MF) were prepared by hydrothermal method using manganese nitrate and ethanol. After calcinating the resulting material at different temperatures in N-2 atmosphere, manganese oxides loaded on C-N three-dimensional networks were obtained. Due to the presence of C-N networks, the structure stability and conductivity of the materials have been increased. The pores and channels generated during the calcination processes facilitate the lithium ions transportation. The composites present excellent charge/discharge ability and cycling stability as anode materials for lithium ion batteries. Therefore, the specific capacity and cycling stability have been greatly enhanced. MnO/CNnws-500 can maintain a specific capacity of 590 mAh center dot g(-1) after 160 cycles which accounts for 78% of theoretical capacity (755 mAh center dot g(-1)) of manganese monoxide (MnO).
A Bottom‐Up Approach to Build 3D Architectures from Nanosheets for Superior Lithium Storage

Yongji Gong,Shubin Yang,Liang Zhan,Lulu Ma,Robert Vajtai,Pulickel M. Ajayan

DOI: https://doi.org/10.1002/adfm.201300844

IF: 19

2013-01-01

Advanced Functional Materials

Abstract:Two‐dimensional (2D) atomic layers such as graphene, and metal chalcogenides have recently attracted tremendous attention due to their unique properties and potential applications. Unfortunately, in most cases, the free‐standing nanosheets easily re‐stack due to their van der Waals forces, and lose the advantages of their separated atomic layer state. Here, a bottom‐up approach is developed to build three‐dimensional (3D) architectures by 2D nanosheets such as MoS2 and graphene oxide nanosheets as building blocks, the thin nature of which can be well retained. After simply chemical reduction, the resulting 3D MoS2‐graphene architectures possess high surface area, porous structure, thin walls and high electrical conductivity. Such unique features are favorable for the rapid diffusions of both lithium ions and electrons during lithium storage. As a consequence, MoS2‐graphene electrodes exhibit high reversible capacity of ≈1200 mAh g−1, with very good cycling performance. Moreover, such a simple and low‐cost assembly protocol can provide a new pathway for the large‐scale production of various functional 3D architectures for energy storage and conversions.
Porous Hydroxide Nanosheets on Preformed Nanowires by Electrodeposition: Branched Nanoarrays for Electrochemical Energy Storage

Xinhui Xia,Jiangping Tu,Yongqi Zhang,Jiao Chen,Xiuli Wang,Changdong Gu,Cao Guan,Jingshan Luo,Hong Jin Fan

DOI: https://doi.org/10.1021/cm302416d

IF: 10.508

2012-01-01

Chemistry of Materials

Abstract:Fast, high-yield, and controllable synthesis of functional hydroxide and oxide nanomaterials on conductive substrates is highly desirable for the energy generation and storage applications. For the same purpose, three-dimensional hierarchical porous nanostructures are being regarded advantageous. In this work, we report the fabrication of porous metal hydroxide nanosheets on a preformed nanowires scaffold using the fast and well-controllable electrodeposition method. Co(OH)(2) and Mn(OH)(2) nanosheets are electrochemically deposited on the Co3O4 core nanowires to form core/shell arrays. Such oxide/hydroxide core/shell nanoarrays can be realized on various conductive substrates. The Co3O4/Co(OH)(2) core/shell nanowire arrays are evaluated as a supercapacitor cathode material that exhibits high specific capacitances of 1095 F/g at 1 A/g and 812 F/g at 40 A/g, respectively. The mesoporous homogeneous Co3O4 core/shell nanowire arrays, obtained by annealing the Co3O4/Co(OH)(2) sample, are applied as the anode material for lithium ion batteries. A high capacity of 1323 mAh/g at 0.5 C and excellent cycling stability are demonstrated. Our results show that electrodeposition is a versatile technique for fabrication of nanometal oxides on 3-D templates for electrochemical energy applications.
MCo2O4 (m=co, Mn, Ni, Zn) Nanosheet Arrays Constructed by Two-Dimension Metal-Organic Frameworks As Binder-Free Electrodes for Lithium-Ion Batteries

Junlei Qi,Pengcheng Wang,Yaotian Yan,Xiaohang Zheng,Jian Cao,Jicai Feng

DOI: https://doi.org/10.1016/j.vacuum.2019.108959

IF: 4

2019-01-01

Vacuum

Abstract:Metal-organic frameworks (MOFs) derived ternary transition metal oxides have attracted more attention because of their unique features of large specific surface area, high porosity, and tunable morphology. Herein, we report a synthesis route for constructing porous MOF-derived MCo2O4 (M = Co, Mn, Ni, Zn) arrays directly on the Ni foam. Among them, MCo2O4 nanosheet arrays electrode shows a higher capacity of 848 mAh g(-1) at 0.2 A g(-1). Further, MnCo2O4 electrode shows a good rate capability of 544 mAh g(-1) at 2 A g(-1). The MnCo2O4 electrode exhibits such good electrochemical performance primarily due to the unique nanostructure, composition of electrodes, and direct growth on the conductive substrates.
CoMn2O4 Spinel Hierarchical Microspheres Assembled with Porous Nanosheets As Stable Anodes for Lithium-ion Batteries

Lin Hu,Hao Zhong,Xinrui Zheng,Yimin Huang,Ping Zhang,Qianwang Chen

DOI: https://doi.org/10.1038/srep00986

IF: 4.6

2012-01-01

Scientific Reports

Abstract:Herein, we report the feasibility to enhance the capacity and stability of CoMn2O4 anode materials by fabricating hierarchical mesoporous structure. The open space between neighboring nanosheets allows for easy diffusion of the electrolyte. The hierarchical microspheres assembled with nanosheets can ensure that every nanosheet participates in the electrochemical reaction, because every nanosheet is contacted with the electrolyte solution. The hierarchical structure and well interconnected pores on the surface of nanosheets will enhance the CoMn2O4/electrolyte contact area, shorten the Li+ ion diffusion length in the nanosheets and accommodate the strain induced by the volume change during the electrochemical reaction. The last, hierarchical architecture with spherical morphology possesses relatively low surface energy, which results in less extent of self-aggregation during charge/discharge process. As a result, CoMn2O4 hierarchical microspheres can achieve a good cycle ability and high rate capability.
Structural Optimization of 3D Porous Electrodes for High-Rate Performance Lithium Ion Batteries

Jianchao Ye,Andreas C. Baumgaertel,Y. Morris Wang,Juergen Biener,Monika M. Biener

DOI: https://doi.org/10.1021/nn505490u

IF: 17.1

2014-12-17

ACS Nano

Abstract:Much progress has recently been made in the development of active materials, electrode morphologies and electrolytes for lithium ion batteries. Well-defined studies on size effects of the three-dimensional (3D) electrode architecture, however, remain to be rare due to the lack of suitable material platforms where the critical length scales (such as pore size and thickness of the active material) can be freely and deterministically adjusted over a wide range without affecting the overall 3D morphology of the electrode. Here, we report on a systematic study on length scale effects on the electrochemical performance of model 3D np-Au/TiO2 core/shell electrodes. Bulk nanoporous gold provides deterministic control over the pore size and is used as a monolithic metallic scaffold and current collector. Extremely uniform and conformal TiO2 films of controlled thickness were deposited on the current collector by employing atomic layer deposition (ALD). Our experiments demonstrate profound performance improvements by matching the Li(+) diffusivity in the electrolyte and the solid state through adjusting pore size and thickness of the active coating which, for 200 μm thick porous electrodes, requires the presence of 100 nm pores. Decreasing the thickness of the TiO2 coating generally improves the power performance of the electrode by reducing the Li(+) diffusion pathway, enhancing the Li(+) solid solubility, and minimizing the voltage drop across the electrode/electrolyte interface. With the use of the optimized electrode morphology, supercapacitor-like power performance with lithium-ion-battery energy densities was realized. Our results provide the much-needed fundamental insight for the rational design of the 3D architecture of lithium ion battery electrodes with improved power performance.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Controllable Synthesis of Mesoporous Peapod‐like Co3O4@Carbon Nanotube Arrays for High‐Performance Lithium‐Ion Batteries

Dong Gu,Wei Li,Fei Wang,Hans Bongard,Bernd Spliethoff,Wolfgang Schmidt,Claudia Weidenthaler,Yongyao Xia,Dongyuan Zhao,Ferdi Schueth

DOI: https://doi.org/10.1002/anie.201501475

2015-01-01

Abstract:Transition metal oxides are regarded as promising anode materials for lithium-ion batteries because of their high theoretical capacities compared with commercial graphite. Unfortunately, the implementation of such novel anodes is hampered by their large volume changes during the Li+ insertion and extraction process and their low electric conductivities. Herein, we report a specifically designed anode architecture to overcome such problems, that is, mesoporous peapod-like Co3O4@ carbon nanotube arrays, which are constructed through a controllable nanocasting process. Co3O4 nanoparticles are confined exclusively in the intratubular pores of the nanotube arrays. The pores between the nanotubes are open, and thus render the Co3O4 nanoparticles accessible for effective electrolyte diffusion. Moreover, the carbon nanotubes act as a conductive network. As a result, the peapod-like Co3O4@carbon nanotube electrode shows a high specific capacity, excellent rate capacity, and very good cycling performance.
Facile synthesis of mesoporous Mn3O4 nanotubes and their excellent performance for lithium-ion batteries

Zhongchao Bai,Na Fan,Zhicheng Ju,Chunli Guo,Yitai Qian,Bin Tang,Shenglin Xiong

DOI: https://doi.org/10.1039/c3ta11910f

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:Because of the low cost and operating potential, Mn3O4 is highly noticeable among transition metal oxides as an anode material for Li-ion batteries. Here, mesoporous Mn3O4 nanotubes with a high surface area of 42.18 m(2) g(-1) and an average pore size of 3.72 nm were synthesized for the first time through the hydrogen reduction of beta-MnO2 nanotubes under a H-2/Ar atmosphere at 280 degrees C for 3 h. Electrochemical results demonstrate that the reversible capacity of mesoporous Mn3O4 nanotubes is 641 mA h g(-1) (much higher than the theoretical capacity of graphite, similar to 372 mA h g(-1)) after 100 cycles at a high current density of 500 mA g(-1). The superior electrochemical performance can be attributed to the unique 1D mesoporous nano-tubular structure, which offers fast and flexible transport pathways for electrolyte ions, and also provides sufficient free space to buffer the large volume change of anodes based on the conversion reaction during the repeated lithium-ion insertion/extraction. The improved electrochemical performance makes such a mesoporous Mn3O4 tubular structure promising as an anode material for next-generation lithium-ion batteries.
3D spatially-confined magnetic anodes towards advanced lithium ion batteries

Shanshan Xiao,Yichuan Zhang,Xianggang Zhou,Xuning Leng,Yingqi Li,Fei Bi,Li Zhao,Liyan Wang,Guangqing Gai,Yangguang Li

DOI: https://doi.org/10.1016/j.jallcom.2023.171827

IF: 6.2

2023-08-25

Journal of Alloys and Compounds

Abstract:Magnetic transition-metal oxides show great prospect as alternatives to prevail anodic carbonaceous substances for lithium ion battery in virtue of their splendid theoretical capacity. However, in addition to their intrinsic poor electronic conductivity, the severe agglomeration of the forming magnetic metal nanoparticles during discharging will deteriorate their actual electrochemical performance in a strong magnetic field environment. Here, we demonstrate a 3D spatially-confining magnetic anode to settle all these dilemmas, in which conversion-type magnetic Fe 3 O 4 nanoparticles with a thin carbon encapsulation layer are anchoring onto 3D nickel nanotube arrays skeleton (Ni/Fe 3 O 4 @C NTAs). The carbon shell spatially confines the agglomeration of Fe nanoparticles and maintains the exceptional integrity of structure. The Ni/Fe 3 O 4 @C NTAs anode exhibits high-capacity lithium storage (∼1286 mAh g −1 at 0.1 C) and superior rate/cycle capability (retaining ∼97 % of initial reversible value at 1 C after long-term 1000 cycles).

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
A Two-Step Strategy for the Preparation of Ultra-Small Mn3O4 @C Anode for Lithium-Ion Batteries

Hongbo Liang,Yanan Liu,Meixiu Song,Xiaoshuang Wang,Yan Song,Xiaoxiao Huang

DOI: https://doi.org/10.1016/j.jallcom.2023.173037

IF: 6.2

2024-01-01

Journal of Alloys and Compounds

Abstract:Nano-engineering and hybrid with carbon are effective methods for improving the electrochemical performance of Mn3O4 anodes. However, there are many difficulties in further reducing the size of Mn3O4. To solve these challenges, a novel hollow microsphere structure constituted of ultra-small Mn3O4 nanoparticles (less than 5 nm) embedded within ultrathin carbon nanosheets is designed as anode materials by a simple two-step heating treatment method. The ultra-small Mn3O4 nanoparticles will accelerate the kinetic reaction process and relieve volume variation. Meanwhile, In-situ fabrication of conductive carbon nanosheets play an important role in the electronic/ion transfer and the structure stability. Due to the synergistic effect of ultra-small Mn3O4 nanoparticles and carbon nanosheets, the material shows a topmost reversible capacity of 804 mAh g-1 at the current density of 1 C and maintains a high specific capacity of 603 mAh g-1 after 700 cycles. The strategy can be extended to prepare of other functional nanoparticles and apply in energy storage and catalysis.
Freestanding Three-Dimensional Core–shell Nanoarrays for Lithium-Ion Battery Anodes

Guoqiang Tan,Feng Wu,Yifei Yuan,Renjie Chen,Teng Zhao,Ying Yao,Ji Qian,Jianrui Liu,Yusheng Ye,Reza Shahbazian-Yassar,Jun Lu,Khalil Amine

DOI: https://doi.org/10.1038/ncomms11774

IF: 16.6

2016-01-01

Nature Communications

Abstract:Structural degradation and low conductivity of transition-metal oxides lead to severe capacity fading in lithium-ion batteries. Recent efforts to solve this issue have mainly focused on using nanocomposites or hybrids by integrating nanosized metal oxides with conducting additives. Here we design specific hierarchical structures and demonstrate their use in flexible, large-area anode assemblies. Fabrication of these anodes is achieved via oxidative growth of copper oxide nanowires onto copper substrates followed by radio-frequency sputtering of carbon-nitride films, forming freestanding three-dimensional arrays with core–shell nano-architecture. Cable-like copper oxide/carbon-nitride core–shell nanostructures accommodate the volume change during lithiation−delithiation processes, the three-dimensional arrays provide abundant electroactive zones and electron/ion transport paths, and the monolithic sandwich-type configuration without additional binders or conductive agents improves energy/power densities of the whole electrode.

Electrochemical construction of three-dimensional porous Mn<sub>3</sub>O<sub>4</sub> nanosheet arrays as an anode for the lithium ion battery

Electrochemical Construction Of Three-Dimensional Porous Mn3o4 Nanosheet Arrays As An Anode For The Lithium Ion Battery

Electrospinning-based Construction of Porous Mn3O4/CNFs As Anodes for High-Performance Lithium-Ion Batteries

Synthesis of nanoporous three-dimensional current collector for high-performance lithium-ion batteries

Three dimensional hierarchically porous crystalline MnO2 structure design for a high rate performance lithium-ion battery anode

Three-dimensional Porous Carbon Nanosheet Networks Anchored with Cu6Sn5@carbon As a High-Performance Anode Material for Lithium Ion Batteries

Facile Template-Free Synthesis Of 3d Porous Mno/C Microspheres With Controllable Pore Size For High-Performance Lithium-Ion Battery Anodes

Rational design of 3D net-like carbon-based Mn3O4 anode material with an enhanced lithium storage performance

Ultrathin NiO Nanosheets Anchored on a Highly Ordered Nanostructured Carbon As an Enhanced Anode Material for Lithium Ion Batteries

Construction of self-supporting macro-porous MnO@CNT anode for stable Li-ion battery

Synthesis and Electrochemical Properties of Manganese Oxides/Carbon-Nitrogen Three-Dimensional Networks Composite as an Anode Material for Lithium Ion Batteries

A Bottom‐Up Approach to Build 3D Architectures from Nanosheets for Superior Lithium Storage

Porous Hydroxide Nanosheets on Preformed Nanowires by Electrodeposition: Branched Nanoarrays for Electrochemical Energy Storage

MCo2O4 (m=co, Mn, Ni, Zn) Nanosheet Arrays Constructed by Two-Dimension Metal-Organic Frameworks As Binder-Free Electrodes for Lithium-Ion Batteries

CoMn2O4 Spinel Hierarchical Microspheres Assembled with Porous Nanosheets As Stable Anodes for Lithium-ion Batteries

Structural Optimization of 3D Porous Electrodes for High-Rate Performance Lithium Ion Batteries

Controllable Synthesis of Mesoporous Peapod‐like Co3O4@Carbon Nanotube Arrays for High‐Performance Lithium‐Ion Batteries

Facile synthesis of mesoporous Mn3O4 nanotubes and their excellent performance for lithium-ion batteries

3D spatially-confined magnetic anodes towards advanced lithium ion batteries

A Two-Step Strategy for the Preparation of Ultra-Small Mn3O4 @C Anode for Lithium-Ion Batteries

Freestanding Three-Dimensional Core–shell Nanoarrays for Lithium-Ion Battery Anodes