Abstract:In this work, peculiar porous α-Fe2O3 nanospheres were fabricated by a glycine-assisted hydrothermal method. They have large mesopores (ca. 10nm) in the core and small mesopores (<4nm) in the shell. To our best knowledge, there have been so far no reports on the synthesis of such peculiar porous α-Fe2O3 nanospheres. X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy and transmission electron microscopy were employed to characterize the obtained Fe2O3 nanospheres. Effects of preparation conditions, such as reactants, reaction temperature and reaction duration, were investigated on the morphology and structure of Fe2O3 nanospheres. It was shown that the morphology and structure could be readily controlled by the time and temperature of hydrothermal treatment. The formation mechanism was proposed based on experimental results, which shows that glycine molecules play an important role in the formation of the morphology and porous structure of α-Fe2O3. The α-Fe2O3 porous nanospheres were used as gas sensing layer, and exhibited excellent gas-sensing properties to ethanol in terms of response and selectivity. The sensors showed good reproducibility and stability as well as short response (9s) and recovery time (43s) even at an ethanol concentration as low as 50ppm. The gas-sensing properties of porous α-Fe2O3 nanospheres are also significantly better than those of previously reported Fe2O3 nanoparticles (ca. 30nm). The sensitivity of the former is over four times higher than that of the latter at varied ethanol concentrations. The gas-sensing mechanism was discussed in details. Both fast response and steady signal make these peculiar nanostructures a promising candidate for ethanol detection.

Synthesis, Characterization and Gas Sensing Properties of Ag-doped α-Fe<sub>2</sub>O<sub>3</sub> by Solid-state Grinding Method

Low-temperature H2S Sensors Based on Ag-doped Α-Fe2o3 Nanoparticles

An Ultrahigh-Sensitivity and Selective Sensing Material for Ethanol: Α-/Γ-fe2o3 Mixed-Phase Mesoporous Nanofibers

Synthesis, Characterization, and Gas-Sensing Property for Hcho of Ag-Doped In2o3 Nanocrystalline Powders

Synthesis and Characterization of Highly Sensitive Hydrogen (H₂) Sensing Device Based on Ag Doped SnO₂ Nanospheres.

Monodisperse Hematite Porous Nanospheres: Synthesis, Characterization, and Applications for Gas Sensors.

Glycine-assisted hydrothermal synthesis of peculiar porous α-Fe2O3 nanospheres with excellent gas-sensing properties

Facile synthesis of Ag lattice doped mesoporous In2O3 nanocubes for high performance ethanol sensing

and sensitive H 2 S sensor at low temperatures based on Cr-doped aFe 2 O 3 nanoparticles

A Highly Selective and Sensitive H2S Sensor at Low Temperatures Based on Cr-doped Α-Fe2o3 Nanoparticles

Porous Α-Fe2o3 Hollow Microspheres: Hydrothermal Synthesis and Their Application in Ethanol Sensors

Preparation and Gas Sensing Properties ofα-Fe2 O3 Hollow Microspheres

Synthesis of Α-Fe2o3 with the Aid of Graphene and Its Gas-Sensing Property to Ethanol

A Low Operating Temperature and High Performance Sensor for H2S Detection Based on Α-Fe2o3/tio2 Heterojunction Nanoparticles Composite

Room-temperature NH3 Gas Sensors Based on Ag-doped Γ-Fe2o3/sio2 Composite Films with Sub-Ppm Detection Ability

Synthesis of porous α-Fe2O3 microrods via in situ decomposition of FeC2O4 precursor for ultra-fast responding and recovering ethanol gas sensor

Synthesis and Gas Sensing Properties of Α-Fe2o3@zno Core–shell Nanospindles

Study on Preparation and Physical Properties of Fe2O3 Nanopowders

A Fast Response & Recovery H2S Gas Sensor Based on Α-Fe2o3 Nanoparticles with Ppb Level Detection Limit.

Synergistic effects of α-Fe2O3nanoparticles and Fe-doping on gas-sensing performance of NiO nanowires and interface mechanism

Synthesis and Gas Sensing Properties of ∝-Fe2o3 Microspheres Toward Ppb-Level Aniline Detection

Synthesis, Characterization and Gas Sensing Properties of Ag-doped &#945;-Fe<sub>2</sub>O<sub>3</sub> by Solid-state Grinding Method