Abstract:3D Concrete Printing (3DCP) is considered a solution to confront both labor shortages and material waste in the construction industry. However, to realize non-standard, large-scale buildings, substantial amounts of supporting material and manual assembly are still required to print structures with significant overhangs, including the inclined structure and the cantilever structure. In response, the study draws inspiration from mushroom lamellae and proposes a geometry-based approach to adjusting the large-overhang shape into a self-supported one. This approach imitates lamella morphology by creating folds on the given geometry based on constraints established through empirical studies, thereby reducing overhangs and improving printability. Specifically, the proposed approach includes two shape variation methods. The first method generates lamellae perpendicular to the inclined shape, thereby providing lateral support to the filament. The second method creates lamellae under the cantilever, facilitating a seamless horizontal-to-vertical transition. The effectiveness of these methods is demonstrated through the generation and printing of four column capital samples. Upon evaluating the overhang mechanisms of these geometries, an approachable optimization method is also presented to further minimize the amplitude of lamellae while maintaining self-supporting ability. Compared with control groups that focus on either maximizing printability or minimizing material usage, the optimal result for the inclined structure prototype showcases an over 75 % overhang reduction on the critical layer with just about 15 % use of additional material. As for the cantilever prototype, an over 75 % overhang reduction is achieved on the critical layer with about 35 % additional material usage. Various large-scale structure examples are presented at the end of the research, illustrating the applicability and scalability of the lamella-inspired method in a wider range of building types.

Build-to-last

Self-supporting Topology Optimization for Additive Manufacturing

Toward Support-free 3D Printing: A Skeletal Approach for Partitioning Models.

Layout and Geometry Optimization Design for 3D Printing of Self-Supporting Structures

Cross Section-Based Hollowing and Structural Enhancement

Adaptive Density Optimization of Lattice Structures Sustaining the External Multi-load

Solid Stress-Distribution-Oriented Design and Topology Optimization of 3D-Printed Heterogeneous Lattice Structures with Light Weight and High Specific Rigidity

3D fabrication with universal building blocks and pyramidal shells.

Building Orientation Determination Based On Multi-Objective Optimization For Additive Manufacturing

Cost-effective Printing of 3D Objects with Skin-Frame Structures

A non-uniform lattice design method for lightweight structures in 3D printing

More Stiffness with Less Fiber: End-to-End Fiber Path Optimization for 3D-Printed Composites

Topologically engineered 3D printed architectures with superior mechanical strength

Generating Hybrid Interior Structure for 3D Printing

Lattice Structures—Mechanical Description with Respect to Additive Manufacturing

Designing modular 3D printed reinforcement of wound composite hollow beams with semidefinite programming

Topology optimization for additive manufacturing with length scale, overhang, and building orientation constraints

Self-Supporting Lamellae: Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures

The influence of internally architected voids in the creation of high-strength, low-weight 3D-printed cobalt-chromium prototypes

A Support-free Infill Structure Based on Layer Construction for 3D Printing