A Bifunctional Electrocatalyst Α-Mno2-lanio3/carbon Nanotube Composite for Rechargeable Zinc–air Batteries

Hongyun Ma,Baoguo Wang

DOI: https://doi.org/10.1039/c4ra07401g

IF: 4.036

2014-01-01

RSC Advances

Abstract:α-MnO2-LaNiO3/CNTs as one integrated hybrid exhibits enhanced reactivity towards ORR and OER. Electrons are directly transferred by the CNT conductor.

What problem does this paper attempt to address?

A bifunctional electrocatalyst alpha-MnO2-LaNiO3/carbon nanotube composite for rechargeable zinc-air batteries

Hongyun Ma,Baoguo Wang

DOI: https://doi.org/10.1039/c4ra07401g

IF: 4.036

2014-01-01

RSC Advances

Abstract:Development of highly active, non-precious, electrochemical catalysts is needed to optimize rechargeable zinc-air battery electrodes. Herein, we fabricate a bifunctional electrocatalyst alpha-MnO2-LaNiO3/carbon nanotube (CNTs) composite to improve the activity of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). CNTs are used to support the bifunctional catalysts in one integrated material. The chemical and physical characterization of the bifunctional catalyst is performed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The electrochemical properties of the bifunctional catalyst tested by a rotating disc electrode system revealed enhanced catalytic activity toward both the ORR and OER. A four-electron reduction pathway contributes to the ORR process at different rotation speeds indicating an effective catalytic activity. A rechargeable zinc-air battery using the bifunctional catalyst achieved a maximum power density of 55.1 mW cm(-2), and its voltage polarization showed a 1.4% decrease in discharge and a 4.8% increase in charge after 75 charge-discharge (C-D) cycles. The charge transfer resistance for the ORR and OER catalyzed by the bifunctional catalyst increased from 1.24 to 4.68 Omega after 75 C-D cycles. The bifunctional electrocatalysts show satisfactory performance in an electrically rechargeable zinc-air battery.
Isolated Transition Metal Nanoparticles Anchored on N-doped Carbon Nanotubes As Scalable Bifunctional Electrocatalysts for Efficient Zn–air Batteries

Baohua Zhang,Meiying Wu,Liang Zhang,Yun Xu,Weidong Hou,Huazhang Guo,Liang Wang

DOI: https://doi.org/10.1016/j.jcis.2022.09.014

IF: 9.9

2023-01-01

Journal of Colloid and Interface Science

Abstract:Accelerating the sluggish anode reaction in a Zn–air battery can improve its energy efficiency, but the large-scale development of this battery is hindered by the lack of bifunctional catalysts. Herein, we designed a one-step carbonization strategy for synthesizing monodispersed Co nanoparticles supported on N-doped carbon nanotube (Co/CNT), which shows excellent bifunctional electrocatalytic performance with long-term durability for oxygen reduction reaction/oxygen evolution reaction. The formation of carbon substrates from the carbonization of nitrogenous organic molecules are benefit to capture more Co nanoparticles though strong metal–substrate interaction, then construct high-density effective active sites of the Lewis base for accelerating the electrocatalytic reaction process. To verify its superior performance, a rechargeable Zn–air battery with a Co/CNT air electrode was subsequently constructed. The battery exhibits an open-circuit voltage of 1.41 V and a specific discharge capacity of 835.2 mAh/gZn, which can be continuously charged and discharged with good cycle stability. Our study provides a new strategy for developing various practical carbon-based non-noble metallic bifunctional electrocatalysts with promising performance in electrocatalysis and batteries to achieve the target of carbon neutrality.
Multidimensional Bimetallic-Codoped MOF-derived M@N-CNTs Bifunctional Electrocatalysts for Rechargeable Zinc-Air Batteries

Leilei Lu,Jishen Tian,Jianyu Zhou,Weijie Li,Junpeng Li,Qiang Tan,Xifei Li

DOI: https://doi.org/10.1016/j.apcato.2024.206929

2024-01-01

Abstract:The design and synthesis of low-cost and efficient non-noble metal bifunctional electrocatalysts for enhancing the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is a pressing demand for the development of rechargeable zinc-air batteries. In this paper, a range of metal@nitrogen-doped carbon nanotubes (M@N-CNTs, M = Fe, Ni) materials were prepared by the typical solvothermal synthesis with Fe and Ni co-doped zeolitic imidazolate framework-8 (ZIF-8) as precursors. The synthesized catalysts have a multidimensional structure of one-dimensional M-N-doped carbon nanotubes coexisting with carbonized M-N-doped dodecahedra, providing abundant catalytically active sites for oxygen, as well as multidimensional channels for mass diffusion and electron transport, thus exhibiting excellent catalytic activity and stability. The FeNi@N-CNTs-10 electrocatalyst possesses a half-wave potential of E-1/2 = 0.92 V for ORR and E-j=10 = 1.46 V (eta = 230 mV) for OER in 0.1 molL-1 KOH, which is superior to commercial 20 wt% Pt/C+ RuO2 (E-1/2 = 0.82 V, E-j=10 = 1.61 V (eta = 380 mV)). Zinc-air battery loaded with FeNi@N-CNTs-10 presents a power density of 187 mWcm(-2) and smaller voltage gap (1.0 V) than commercial Pt/C + RuO2 for >1600 discharge-charge cycles at 10 mAcm(-2). The outstanding performance is due to the multidimensional structure, high graphitization carbon and complementary effect between FeNi and M-N-x moiety. The design of multidimensional structure with bifunctional active sites could be extended to other metal-air batteries.
3D Graphene-Carbon Nanotube Hybrid Supported Coupled Co-MnO Nanoparticles As Highly Efficient Bifunctional Electrocatalyst for Rechargeable Zn-Air Batteries.

Chaoqi Zhang,Fantao Kong,Yu Qiao,Qingbiao Zhao,Aiguo Kong,Yongkui Shan

DOI: https://doi.org/10.1002/asia.202000913

2020-01-01

Chemistry - An Asian Journal

Abstract:The development of high-efficiency and low-cost catalysts is one of the core and important issues to improve the efficiency of electrochemical reactions on electrodes, and it is also the goal we ultimately pursue in the commercialization of large-scale clean energy technologies, such as metal-air batteries. Herein, a nitrogen-doped graphene oxide (GO)-carbon nanotube (CNT) hybrid network supported coupled Co/MnO nanoparticles (Co/MnO@N-C) catalyst was prepared with a hydrothermal-pyrolysis method. The unique three-dimensional network structure of substrate allowed for the uniform dispersion of Co-MnO nanoparticles in the carbon skeleton. These characters enable the Co/MnO@N-C to possess the excellent bifunctional electrocatalysts. In alkaline electrolyte, the Co/MnO@N-C presents the outstanding oxygen evolution reaction (OER) performance comparable to the commercial RuO(2)catalyst and the exceedingly good oxygen reduction reaction (ORR) activity with positive half-wave potential of 0.90 V vs. RHE outperforming commercial Pt/C (0.84 V vs. RHE) and the recently reported analogous electrocatalysts. When it is applied to homemade Zn-air batteries, such a non-noble metal electrocatalyst can deliver a better power density, specific capacity and cycling stability than mixed Pt/C and RuO(2)catalyst, and exhibits a wide application prospect and great practical value.
MnOx anchored on N and O co-doped carbon nanotubes encapsulated with FeCo alloy as highly efficient bifunctional electrocatalyst for rechargeable Zinc-Air batteries

Shanhua Chen,Yanqing Huang,Ming Li,Panpan Sun,Xiaowei Lv,Bing Li,Liang Fang,Xiaohua Sun

DOI: https://doi.org/10.1016/j.jelechem.2021.115513

IF: 4.598

2021-01-01

Journal of Electroanalytical Chemistry

Abstract:Currently, development of OER/ORR bifunctional electric catalysts with low cost, high catalytic activity and stability is the key step to promote the practical application of zinc-air batteries. Herein, composite catalyst with manganese oxide on N and O co-doped carbon nanotubes encapsulated with FeCo alloy (CoFe@CNT/ MnO) was prepared in situ on CFP by hydrothermal and CVD pyrolysis methods. Owing to rich C=O functional group on in situ growing carbon nanotubes with 3D open structure, alloying effect of CoFe core metal embedded in carbon nanotube and the contribution of MnO supported on carbon nanotubes to ORR performance and stability, the CoFe@CNT/MnO catalyst exhibits low overpotential of 193 mV at the current density of 10 mA/ cm2 for OER, larger diffusion-limited current density of 5.75 mA/cm2 and half-wave potential (E1/2 = 0.85 V) for ORR, high specific capacity (810 mAh/gZn) and peak power density (164 mW/cm2) with the Zn-air battery and superior stability. Moreover, the peak power density of the single CoFe@CNT/MnO-based quasi-solid state ZAB could reach 142 mW/cm2, and two quasi-solid state ZABs connected in series can power a mini fan.
A Highly Active Bifunctional Catalyst of Mn-Co-Fe-N/S@CNT for Rechargeable Zinc-Air Batteries

Keliang Wang,Xiaotian Liu,Yayu Zuo,Manhui Wei,Yu Xiao,Pengfei Zhang,Jianyin Xiong,Pucheng Pei

DOI: https://doi.org/10.1149/1945-7111/ac3718

IF: 3.9

2021-01-01

Journal of The Electrochemical Society

Abstract:Rechargeable zinc-air batteries are promising candidates for energy storage due to their high energy density, environmentally friendliness, and low cost. However, such batteries are limited by the high cost and sluggish kinetics of noble metal catalysts. Here, we present a highly active bifunctional catalyst of Mn–Co–Fe–N/S@CNT, where the catalyst is synthesized by Mn, Co, and Fe oxides doped with N and S on porous carbon nanotubes. Mn–Co–Fe–N/S@CNT has higher electrocatalytic activity than the commercial catalysts of Pt/C and RuO2, demonstrating that the half-wave potential of the oxygen reduction reaction (ORR) of Mn–Co–Fe–N/S@CNT is 0.807 V (0.9 V with Pt/C), the initial potential is 0.85 V (0.789 V with Pt/C), the limiting current is 5.66 mA cm−2 at 0.2 V (5.69 mA cm−2 with Pt/C), and oxygen evolution reaction overpotential of Mn–Co–Fe–N/S@CNT is 0.386 V at 10 mA cm−2 (0.371 V with RuO2). Moreover, a rechargeable zinc-air battery using Mn–Co–Fe–N/S@CNT outputs a discharging voltage of 1.2 V and a stable cycle life of over 150 h at 10 mA cm−2.
FeNiCrCoMn High-Entropy Alloy Nanoparticles Loaded on Carbon Nanotubes as Bifunctional Oxygen Catalysts for Rechargeable Zinc-Air Batteries

Xinhui Cao,Yiting Gao,Zihe Wang,Huanzhi Zeng,Yifei Song,Shanguang Tang,Liuxiong Luo,Shen Gong

DOI: https://doi.org/10.1021/acsami.3c04120

IF: 9.5

2023-06-30

ACS Applied Materials & Interfaces

Abstract:An efficient and stable bifunctional oxygen catalyst is necessary to complete the application of the rechargeable zinc-air battery. Herein, an economical and convenient process was adopted to successfully coat high-entropy alloy Fe(12)Ni(23)Cr(10)Co(55-x)Mn(x) nanoparticles on carbon nanotubes (CNTs). In 0.1 M KOH solution, with a bifunctional oxygen overpotential (ΔE) of only 0.7 V, the catalyst Fe(12)Ni(23)Cr(10)Co(30)Mn(25)/CNT exhibits excellent bifunctional oxygen catalytic performance,...

materials science, multidisciplinary,nanoscience & nanotechnology
Efficient Bifunctional Oxygen Electrocatalysts for Rechargeable Zn‐air Batteries Derived from Ni‐modified Prussian Blue

Haihua Wu,Juanjuan Zhai,Feng Wu,Jiahao Wu,Yudan Li,Xin Xu,Yunfang Gao

DOI: https://doi.org/10.1002/cctc.202301195

IF: 4.5

2023-11-21

ChemCatChem

Abstract:The rational design and exploration of efficient, low‐cost and durable bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key to the development of rechargeable metal‐air batteries. Here, we report a novel approach to in‐situ synthesize Fe0.64Ni0.36 nanoalloy encapsulated in nitrogen‐doped porous carbon nanotubes (FeNi@N‐CNTs) as bifunctional electrocatalyst derived from Ni‐modified Prussian blue, on which the ORR/OER can be promoted by the N‐CNTs surface due to the electron modulation caused by electron transfer from the inner FeNi nanoalloy to the N‐CNTs surface. The abundant wide‐size range of mesopores in N‐CNTs can offer rapid mass transport channels to facilitate the catalytic reactions. What's more, the encapsulation structure endows the outer N‐CNTs acting as a "shield" to prevent the inner FeNi nanoalloy from corrosion in strong basic medium. Thanks to the synergistic effect between the N‐CNTs and FeNi nanoalloy, the obtained FeNi@N‐CNTs exhibits excellent bifunctional oxygen catalytic activity together with outstanding performance and cycling durability in rechargeable Zn‐air battery. This work will open new avenues for the development of advanced bifunctional electrocatalysts for other metal‐air batteries.

chemistry, physical
Enhanced ORR/OER activities and stability of nitrogen-doped CNTs decorated with MnO 2 as electrocatalysts in rechargeable Zn-air batteries

Anqi Zhao,Hongfei Liu,Guangyuan Zhou

DOI: https://doi.org/10.1016/j.mcat.2024.114382

IF: 4.6

2024-07-15

Molecular Catalysis

Abstract:It is the key to develop an efficient and durable bifunctional electrocatalyst that can catalyze both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in rechargeable Zn-air batteries. In this study, nitrogen-doped carbon nanotubes (NCNTs) decorated with MnO 2 were synthesized by metal organic chemical vapor deposition of manganese carbonyl. MnO 2 and nitrogen species as active sites showed enhanced ORR/OER activities compared to NCNTs. A small amount of MnO 2 can catalyze the disproportionation of hydrogen peroxide resulted in an overall four-electron reduction of oxygen. The electrochemical stability studies revealed that NCNTs decorated with MnO 2 exhibited a slower decrease in OER activity and maintained a relatively higher ORR activity than NCNTs, which proves its high potential in ORR and OER catalysis under alkaline conditions. Furthermore, the NCNTs decorated with MnO 2 catalyst exhibited excellent performance in Zn-air batteries.

chemistry, physical
Manganese-doped Cobalt Spinel Oxide As Bifunctional Oxygen Electrocatalyst Toward High-Stable Rechargeable Zn-air Battery

Xiaoke Zhang,Qianfeng Liu,Shimin Liu,Erdong Wang

DOI: https://doi.org/10.1016/j.electacta.2022.141477

IF: 6.6

2023-01-01

Electrochimica Acta

Abstract:High-performance and low-cost bifunctional electrocatalysts for ORR and OER are urgently required for rechargeable Zn-air batteries. Herein, a series of Mn-doped Co3O4 nanoparticles grown on carbon nanotubes (Mn-Co3O4@CNTs) bifunctional electrocatalysts are designed. Owing to the moderate doped Mn atoms, the Mn-Co3O4 heightens ORR activity via the synergistic effect between Co and Mn atoms, and more Co3+ active sites are exposed on the surface of Mn-Co3O4 to enhance the OER rate. As a result, the 40% Mn-doped Mn-Co3O4@CNTs electrocatalyst exhibits higher ORR (E1/2 = 0.84 V) and OER (eta 10 = 356 mV at 10 mA cm-2) performance. More significantly, the Mn-Co3O4@CNTs equipped with rechargeable ZAB displays a high power density of 116 mW cm-2, a low charge-discharge voltage gap of 0.94 V at 10 mA cm-2, and superior cycling stability of over 425 h and 1200 cycles, being much more outperforming than Pt-and Ru-based ZABs.
Multilayer Porous Fe/Co-N-MWCNT Electrocatalyst For Rechargeable Zinc-Air Batteries

Lijuan Ma,Han Wang,Jing Zang,Xinna Wang,Hao Li,Yanwei Li,Yanhui Li

DOI: https://doi.org/10.1002/asia.202400366

2024-10-16

Abstract:The design of efficient, stable, low-cost non-precious metal-based electrocatalysts with enhanced oxygen reduction reaction (ORR) activity has garnered significant attention in the scientific community. This study introduces a novel electrocatalyst, Fe/Co-N-MWCNT, synthesized through the in-situ growth of ZIF-8 and Fe/Co-Phen on multi-walled carbon nanotubes (MWCNTs), followed by pyrolysis at varying temperatures to optimize its properties. The inclusion of Fe and Co during the pyrolysis process facilitated the creation of metal active sites and Fe-Co, enhancing electron transfer and ORR activity. Compared to Pt/C (E1/2=0.854 V, JL=4.90 mA cm-2), Fe/Co-N-MWCNT exhibited a similar half-wave potential (E1/2=0.812 V) and an improved limiting current density (JL=5.37 mA cm-2). Moreover, Fe/Co-N-MWCNT displayed remarkable stability, showing only a 7 mV negative shift in E1/2 after 2000 cycles. Ampere response testing indicated a current decay of only 7.8 % for Fe/Co-N-MWCNT after 10000 s, while Pt/C experienced a decay of about 18.4 %. The exceptional catalytic stability of Fe/Co-N-MWCNT positions it as a promising candidate for rechargeable zinc-air batteries, attributed to its high pyridinic nitrogen content, unique structure, and abundant metal active sites.
Carbon nanotube-encapsulated Co/Co3Fe7 heterojunctions as a highly-efficient bifunctional electrocatalyst for rechargeable zinc-air batteries

Xiaofeng Liu,Sichen Huo,Xiaoqin Xu,Xinyu Wang,Wanyu Zhang,Yanjie Chen,Cheng Wang,JiahaoXie,Xueting Liu,Haiyang Chang,Jinlong Zou

DOI: https://doi.org/10.1016/j.jcis.2024.04.025

2024-07-15

Abstract:In oxygen electrocatalysis, how to rationally design low-cost catalysts with reasonable structure and long-term stability is a crucial issue. Here, an in-situ growth strategy is used to construct a shaped structure encapsulating a uniformly-dispersed Co/Co3Fe7 heterojunction in nitrogen-doped carbon nanotubes (Co/Co3Fe7@NCNTs). Hollow CoFe layered-double-hydroxide prisms act as sacrifices for in-situ growth of Co/Co3Fe7 nanoparticles, which also catalyze the growth of bamboo-like NCNTs. Tubular structure not only accelerates the charge transfer through the interactions between Co and Co3Fe7, but also limits the aggregation of the particles, thereby promoting the 4e- oxygen reduction/evolution reactions (ORR/OER) kinetics and stabilizing the bifunctional activity. Co/Co3Fe7@NCNTs-800 (pyrolyzed at 800 °C) shows exceptional ORR activity (half-wave potential of 0.89 V) and methanol tolerance. Meanwhile, Co/Co3Fe7@NCNTs-800 shows a small OER overpotential of 280 mV, which increases by only 9 mV after 1000 cyclic voltammetry (CV) cycles. The outstanding bifunctionality (potential gap of 0.62 V) is ascribed to the electronic structure modulation at the Co/Co3Fe7 heterointerface. Notably, it also has a high performance as an air-cathode for rechargeable zinc-air battery, showing high power density (165 mW cm-2) and specific capacity (770.5 m Ah kg-1). This work provides a new reference for promoting the development of alloy catalysts with heterogeneous interfaces.
Highly Efficient and Stable Bifunctional Electrocatalyst with Alloy/Oxide Heterostructures for a Rechargeable Zinc–Air Battery

Chang Rui,Ting Zhang,Yan Jiang,Dongsheng Xie,Meng Li,Qian Lu,Yunfei Bu

DOI: https://doi.org/10.1021/acs.energyfuels.2c02744

IF: 4.6541

2022-10-03

Energy & Fuels

Abstract:Constructing heterogeneous interfaces between transition metal alloys and oxides in a carbon-based composite catalyst is an effective strategy for boosting the oxygen evolution reaction and oxygen reduction reaction (OER and ORR). Inspired by this concept, a carbon-coated MnCoNi alloy/oxide catalyst (Ox-MnCoNi-C) was synthesized by carbonization of metal–organic frameworks (MOFs) and controllable reoxidation process. Owing to the synergetic interaction between abundant active sites on the heterogeneous interface and the good electron transfer rate of graphitic carbon, Ox-MnCoNi-C exhibits a low potential gap (ΔE) of 0.79 V. Meanwhile, the assembled liquid zinc–air batteries exhibit high power density (125 mW cm–2), superior primary discharge specific capacity (822 mAh gZn –1), and no less than 100 h of steady charging and discharging operation running at 5 mA cm–2. This approach will provide a generic template for the preparation and extension of MOF-derived carbon composite catalysts applied in oxygen electrocatalysis.

energy & fuels,engineering, chemical
Bimetal nanoparticles hybridized with carbon nanotube boosting bifunctional oxygen electrocatalytic performance

Chen Sun,Yong-Jie Zhao,Xuan-Yi Yuan,Jing-Bo Li,Hai-Bo Jin

DOI: https://doi.org/10.1007/s12598-022-02021-1

IF: 6.318

2022-07-15

Rare Metals

Abstract:Developing bifunctional oxygen catalysts with high efficiency and low cost to replace platinum-group metal catalysts commonly utilized in metal-air batteries is critically desired. In this article, a convenient method to synthesis NiFe nanoparticles hybridized with N-doped carbon nanotube (NiFe@N-CNTs) is reported. Electrocatalytic performance analysis indicates that Ni x Fe 1− x @N-CNTs offers favorable oxygen reduction reaction (ORR) kinetics (onset potential ( E onset ) is 0.87 V and half-wave potential ( E 1/2 ) is 0.84 V), together with excellent oxygen evolution reaction (OER) performance (an overpotential of 270 mV to drive 10 mA·cm −2 ). Contributed by the synergetic effect between NiFe alloy and N-CNTs, when being utilized as air cathode, rechargeable Zn-air batteries present superior cycling stability for over 150 h. This research provides a universal strategy to synthesize the hybrids of intertwined carbon nanotube matrix loaded with alloy nanoparticles.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Self-assembly formation of Bi-functional Co3O4/MnO2-CNTs hybrid catalysts for achieving both high energy/power density and cyclic ability of rechargeable zinc-air battery

Nengneng Xu,Yuyu Liu,Xia Zhang,Xuemei Li,Aijun Li,Jinli Qiao,Jiujun Zhang

DOI: https://doi.org/10.1038/srep33590

IF: 4.6

2016-09-01

Scientific Reports

Abstract:Abstractα-MnO2 nanotubes-supported Co3O4 (Co3O4/MnO2) and its carbon nanotubes (CNTs)-hybrids (Co3O4/MnO2-CNTs) have been successfully developed through a facile two-pot precipitation reaction and hydrothermal process, which exhibit the superior bi-functional catalytic activity for both ORR and OER. The high performance is believed to be induced by the hybrid effect among MnO2 nanotubes, hollow Co3O4 and CNTs, which can produce a synergetic enhancement. When integrated into the practical primary and electrochemically rechargeable Zn-air batteries, such a hybrid catalyst can give a discharge peak power density as high as 450 mW cm−2. At 1.0 V of cell voltage, a current density of 324 mA cm−2 is achieved. This performance is superior to all reported non-precious metal catalysts in literature for zinc-air batteries and significantly outperforms the state-of-the-art platinum-based catalyst. Particularly, the rechargeable Zn-air battery can be fabricated into all-solid-state one through a simple solid-state approach, which exhibits an excellent peak power density of 62 mW cm−2, and the charge and discharge potentials remain virtually unchanged during the overall cycles, which is comparable to the one with liquid electrolyte.

multidisciplinary sciences
A Stable Bifunctional Catalyst for Rechargeable Zinc–Air Batteries: Iron–Cobalt Nanoparticles Embedded in a Nitrogen‐Doped 3D Carbon Matrix

Xu Liu,Lei Wang,Peng Yu,Chungui Tian,Fanfei Sun,Jingyuan Ma,Wei Li,Honggang Fu

DOI: https://doi.org/10.1002/anie.201809009

2018-01-01

Abstract:AbstractLow‐cost, efficient bifunctional electrocatalysts are needed to mediate the oxygen reduction and oxygen evolution reactions (ORR/OER) in Zn–air batteries. Such catalysts should offer binary active sites and an ability to transfer oxygen‐based species and electrons. A 3D catalyst, composed of nanoparticles of CoFe alloy embedded in N‐doped carbon nanotubes tangled with reduced graphene oxide, was developed, which presents appreciable ORR/OER activity when applied in a Zn–air battery. A high open‐circuit voltage of 1.43 V, a stable discharge voltage of 1.22 V, a high energy efficiency of 60.1 %, and excellent stability after 1 600 cycles at 10 mA cm−2 are demonstrated. An all‐solid‐state battery had an outstanding lifetime and high cell efficiency even upon bending. In situ X‐ray absorption spectroscopy revealed that OOH* and O* intermediates induce variations in the Fe−Fe and Co−Co bond lengths, respectively, suggesting that Fe and Co species are crucial to the ORR/OER processes.
Morphology controlled La2O3/Co3O4/MnO2–CNTs hybrid nanocomposites with durable bi-functional air electrode in high-performance zinc–air energy storage

Nengneng Xu,Jinli Qiao,Xia Zhang,Chengyu Ma,Saiai Jian,Yuyu Liu,Pucheng Pei

DOI: https://doi.org/10.1016/j.apenergy.2016.04.036

IF: 11.2

2016-01-01

Applied Energy

Abstract:•La2O3/Co3O4/MnO2–CNTs hybrid as bifunctional cathode catalyst has been developed for Zn–air battery.•La2O3/Co3O4/MnO2–CNTs exhibited high catalytic activity for both discharge and charge process.•High power density (295mWcm−2) and high energy density (970Whkg−1) were obtained for primary Zn–air battery.•A small C–D voltage drop and high reversibility was realized for rechargeable Zn–air battery.•The flexible rechargeable Zn–air battery as solid-state energy storage approach was fabricated.
Carbon Nanotubes Intercalated Co/N-doped Porous Carbon Nanosheets As Efficient Electrocatalyst for Oxygen Reduction Reaction and Zinc–air Batteries

Shaojun Liu,Ibrahim Saana Amiinu,Xiaobo Liu,Jian Zhang,Mingjun Bao,Tian Meng,Shichun Mu

DOI: https://doi.org/10.1016/j.cej.2018.02.039

IF: 15.1

2018-01-01

Chemical Engineering Journal

Abstract:Earth abundant transition-metals and nitrogen co-doped carbon (M-N/C) materials are particularly attractive as the most viable alternative to precious metal catalysts. Herein, a high-performance catalyst is prepared by building a carbon nanotubes (CNTs) intercalated Co/N-doped few layered carbon nanosheet (CNTs-Co/NC) hybrid with a unique open-ended porous structure. To prepare the catalyst, polyaniline molecules are first polymerized on carbon nanotubes and subsequent thermal annealing, resulting in formation of CNTs-Co/NC. For the CNTs-Co/NC catalyst, its surface area and pore volume are as high as 1072 m(2)/g and 0.63 cm(3)/g, respectively. As expected, it displays high ORR performance with an onset and a half wave potential of 0.96 V and 0.84 V (vs. RHE), respectively, in alkaline media. Impressively, when used as a cathode catalyst for zinc-air batteries, CNTs-Co/NC also exhibits a peak power density up to 83 mWcm(-2) with long-term durability and high rate capacity. Such enhanced performance can be attributed to the synergistic effect of the abundant Co/N coupling centers, the high surface area with more exposed active sites, and the high porosity accessible to ion transport.
Earth-abundant coal-derived carbon nanotube/carbon composites as efficient bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries

Zhenjie Lu,Songdong Yao,Yanzeng Dong,Dongling Wu,Haoran Pan,Xinning Huang,Tao Wang,Zhenyu Sun,Xingxing Chen

DOI: https://doi.org/10.1016/j.jechem.2020.07.040

IF: 13.1

2021-05-01

Journal of Energy Chemistry

Abstract:<p>The exploration of active and robust electrocatalysts for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is the bottleneck to realize the commercialization of rechargeable metal-air batteries and regenerative fuel cells. Here we report facile synthesis of three-dimensional (3D) carbon nanotube (CNT)/carbon composites using earth-abundant coal as the carbon source, hydrogen reductant and heteroatom dopant to grow CNTs. The prepared composite featuring 3D structural merits and multiple active sites can efficiently catalyze both ORR and OER, affording high activity, fast kinetics, and long-term stability. With the additional incorporation of manganese, the developed catalyst afforded a potential difference of 0.80 V between ORR at the half wave potential and OER at a current density of 10 mA cm<sup>-2</sup>. The optimized sample has presented excellent OER performance within a constructed solar-powered water splitting system with continuously generating oxygen bubbles at anode. Notably, it can be further used as a durable air-electrode catalyst in constructed Zn-air battery, delivering an initial discharge/charge voltage gap of 0.73 V, a remained voltaic efficiency of 61.2% after 160 cycles and capability to power LED light for at least 80 h. This study provides an efficient approach for converting traditional energy resource i.e. coal to value-added alternative oxygen electrocatalysts in renewable energy conversion systems.</p>

chemistry, physical,engineering, chemical, applied,energy & fuels
Development of an Efficient Bi-Functional Catalyst made of a Novel Hybrid Material for Rechargeable Zn-Air Battery

Shiping Wang,Georg Bendt,Stephan Schulz,,

DOI: https://doi.org/10.21926/cr.2103001

2021-05-24

Catalysis Research

Abstract:One-pot synthesis of mesoporous hybrid material consisting of Mn-Co/CoO nanoparticles encapsulated in an N-doped graphene shell decorated with Mo2C nanoparticles (Mo2C-NC@Mn-Co/CoO) was reported. The Mn and Mo components synergistically refined the graphitized carbons due to the interactions with N and C atoms while promoting the stability of the Co/CoO nanoparticles. These components exhibited a beneficial effect on the dispersion of the active metal/metal oxide nanoparticles and the formation of a mesoporous structure under high-temperature conditions, which together led to optimized oxygen adsorption/desorption capabilities as well as mass transport properties. The hybrid material showed high bifunctional performance for both oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), as well as promising catalytic properties as the air electrode in a zinc-air battery, featuring superior long-term cycle stability comparable to that of Pt-C/RuO2 materials.

A Bifunctional Electrocatalyst Α-Mno2-lanio3/carbon Nanotube Composite for Rechargeable Zinc–air Batteries

A bifunctional electrocatalyst alpha-MnO2-LaNiO3/carbon nanotube composite for rechargeable zinc-air batteries

Isolated Transition Metal Nanoparticles Anchored on N-doped Carbon Nanotubes As Scalable Bifunctional Electrocatalysts for Efficient Zn–air Batteries

Multidimensional Bimetallic-Codoped MOF-derived M@N-CNTs Bifunctional Electrocatalysts for Rechargeable Zinc-Air Batteries

3D Graphene-Carbon Nanotube Hybrid Supported Coupled Co-MnO Nanoparticles As Highly Efficient Bifunctional Electrocatalyst for Rechargeable Zn-Air Batteries.

MnOx anchored on N and O co-doped carbon nanotubes encapsulated with FeCo alloy as highly efficient bifunctional electrocatalyst for rechargeable Zinc-Air batteries

A Highly Active Bifunctional Catalyst of Mn-Co-Fe-N/S@CNT for Rechargeable Zinc-Air Batteries

FeNiCrCoMn High-Entropy Alloy Nanoparticles Loaded on Carbon Nanotubes as Bifunctional Oxygen Catalysts for Rechargeable Zinc-Air Batteries

Efficient Bifunctional Oxygen Electrocatalysts for Rechargeable Zn‐air Batteries Derived from Ni‐modified Prussian Blue

Enhanced ORR/OER activities and stability of nitrogen-doped CNTs decorated with MnO 2 as electrocatalysts in rechargeable Zn-air batteries

Manganese-doped Cobalt Spinel Oxide As Bifunctional Oxygen Electrocatalyst Toward High-Stable Rechargeable Zn-air Battery

Multilayer Porous Fe/Co-N-MWCNT Electrocatalyst For Rechargeable Zinc-Air Batteries

Carbon nanotube-encapsulated Co/Co3Fe7 heterojunctions as a highly-efficient bifunctional electrocatalyst for rechargeable zinc-air batteries

Highly Efficient and Stable Bifunctional Electrocatalyst with Alloy/Oxide Heterostructures for a Rechargeable Zinc–Air Battery

Bimetal nanoparticles hybridized with carbon nanotube boosting bifunctional oxygen electrocatalytic performance

Self-assembly formation of Bi-functional Co3O4/MnO2-CNTs hybrid catalysts for achieving both high energy/power density and cyclic ability of rechargeable zinc-air battery

A Stable Bifunctional Catalyst for Rechargeable Zinc–Air Batteries: Iron–Cobalt Nanoparticles Embedded in a Nitrogen‐Doped 3D Carbon Matrix

Morphology controlled La2O3/Co3O4/MnO2–CNTs hybrid nanocomposites with durable bi-functional air electrode in high-performance zinc–air energy storage

Carbon Nanotubes Intercalated Co/N-doped Porous Carbon Nanosheets As Efficient Electrocatalyst for Oxygen Reduction Reaction and Zinc–air Batteries

Earth-abundant coal-derived carbon nanotube/carbon composites as efficient bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries

Development of an Efficient Bi-Functional Catalyst made of a Novel Hybrid Material for Rechargeable Zn-Air Battery