Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Dielectrophoresis Carbon Nanotube and Conductive Polyaniline Nanofiber NH 3 Gas Sensor

The Research and Application of Polyaniline/Multi-Walled Carbon Nanotubes Composite Sensitive Membrane for Ammonia Gas Detection

Polymer Film Coated Micro/Nanofiber for Gas Sensing

Preparation of CNTs/PANi core/shell-structured nanowires and improvement of sensitivity of chemical sensors

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

Study on Gas Sensing Property of Metal Particle Doped Multi-Walled Carbon Nanotubes

A Carbon Nanotube Gas Sensor Fabricated By Dielectrophoresis And Its Application For Nh3 Detection

In-Situ Self-Assembled Polyaniline/Carbon Nanotubes Nanofiber Thin Films For Ammonia Gas Sensors

Composites of Fe2O3 Nanosheets with Polyaniline: Preparation, Gas Sensing Properties and Sensing Mechanism

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

A composite of polyelectrolyte-grafted multi-walled carbon nanotubes and in situ polymerized polyaniline for the detection of low concentration triethylamine vapor.

Polyaniline/polystyrene single-nanowire devices for highly selective optical detection of gas mixtures.

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Gas sensors for ammonia detection based on polyaniline-coated multi-wall carbon nanotubes

High-Performance Gas Sensor of Polyaniline/Carbon Nanotube Composites Promoted by Interface Engineering

Porous Indium Oxide Nanotubes: Layer-by-Layer Assembly on Carbon-Nanotube Templates and Application for Room-Temperature NH3 Gas Sensors

Fabrication of Carbon-Nanotube Sheet Based Hydrogen Sensor

Electrospun Polyaniline Fibers As Highly Sensitive Room Temperature Chemiresistive Sensors for Ammonia and Nitrogen Dioxide Gases

Carbon Nanotube/Polyaniline Composite Nanofibers: Facile Synthesis and Chemosensors