Aerodynamic performance of Π-shaped composite deck cable-stayed bridges including VIV mitigation measures
Hua Bai,Rui Li,Guoji Xu,Ahsan Kareem
DOI: https://doi.org/10.1016/j.jweia.2020.104451
IF: 4.437
2021-01-01
Journal of Wind Engineering and Industrial Aerodynamics
Abstract:<p>This study systematically investigates the influence of the cross-sectional aspect ratio (<em>B</em>/<em>H</em>) and four different aerodynamic mitigation measures, i.e., the fairing, lower central stability plate, inverted L-shaped edge plate, and lower horizontal edge plate, on the performance of cable-stayed bridges, with π-typed composite deck, i.e., π section, due to vortex-induced vibrations (VIV). The study utilized wind tunnel tests and limited CFD simulations by varying bridge dimensions. First, based on a survey of existing cable-stayed bridges with the π-typed composite deck, three-section models with different aspect ratios were studied and their corresponding vibration characteristics for the vertical and torsional VIVs were analyzed. Then, the vibration suppression effects of mitigation measures with several variants in shape were investigated to determine an effective mitigation measure, i.e., with favorable aerodynamic stability, for the π section deck. The vibration suppression mechanism for three selected cases was further assessed using numerical simulation. The results show that: (a) for the π section model with the aspect ratio in the range of 9.05–11.96, increasing the ratio value will delay the onset wind speed of the vertical and torsional VIVs; (b) In the case of a low ratio of the torsional frequency to vertical bending frequency, there are often special phenomena where the vertical and torsional vibrations coexist. However, a larger aspect ratio would result in more independent vertical and torsional vibrations; (c) Regarding the vibration suppression effect, based on the limited studied cases, a small fairing can be superior to large fairings; (d) Different forms of the lower central stability plate have a good suppression effect on the vertical VIV; (e) The use of inverted L-shaped edge plate with <em>a</em> = <span class="math"><math>23</math></span><em>H</em> and <em>b</em> = <span class="math"><math>12</math></span><em>H</em> is identified to result in the best vibration suppression for both the vertical and torsional vibrations among the considered mitigation measures, where <em>a</em> and <em>b</em> are the size parameters of the inverted L-shaped edge plate; and (f) The lower horizontal edge plate cannot effectively improve the torsional VIV performance. This study offers guidance on the performance of composite cable-stayed bridge with the π section in isolation and equipped with mitigation measures to aid in the engineering design practice.</p>
mechanics,engineering, civil