Abstract:Although the formation of nanosized and defective δ-MgCl2 is essential for the performance of Ziegler–Natta catalysts, the process has not sufficiently been elucidated due to certain limitations in characterization. Here, the formation of nanostructures and active surfaces of Ziegler–Natta catalysts was investigated in detail based on a multifaceted set of characterization techniques represented by X-ray total scattering and various spectroscopies in correlation with chemical composition analysis and polymerization tests. Solid samples were extracted in the course of catalyst preparation from Mg(OEt)2 and subjected to the analysis. Several interesting results were found. The addition of TiCl4 almost spontaneously converts Mg(OEt)2 into MgCl2 seeds mainly exposing the {001} basal surface, whose dimensions are below 2 nm; a large Ti amount remains on the material as physisorbed 4-fold-coordinated TiCl x (OEt)4–x species. The heating treatment removes the physisorbed TiCl x (OEt)4–x and/or convert them into chemisorbed 6-fold-coordinated TiCl x (OEt)4–x , while the subsequent addition of an internal donor (here dibutyl phthalate, DBP) promotes a substantial reconstruction and growth of MgCl2 seeds to almost the same size as the final catalyst (ca. 6 nm), with the exposure of the more catalytically relevant lateral surfaces. DBP is in one part adsorbed on MgCl2 surfaces and in the other part complexed with Ti sites. This complex is only partially removed in the following steps of the synthesis. The second TiCl4 addition replaces the chemisorbed TiCl x (OEt)4–x with 6-fold-coordinated TiCl4 species, but it also causes side reactions with DBP, as testified by the formation of phthaloyl chloride. After activation by triethylaluminum (TEAl), the activity per Ti for ethylene was almost constant throughout the whole preparation process after the initial TiCl4 addition, whereas the activity for propylene was negligible before the addition of the donor and increased dramatically in the subsequent steps of the preparation. This was further investigated based on spectroscopies for TEAl-activated samples in order to individuate the active Ti species responsible for the catalysis and to monitor the fate of DBP upon TEAl reaction. The multifaceted characterization approach allowed us to integrate information on the formation of δ-MgCl2, their surfaces, and adsorbed species, providing us with deep insights into the meaning of each step within an industrial catalyst preparation method that has been empirically refined over a long history.

Characterization of MgCl<sub>2</sub>/Alcohol Based Ziegler−Natta Catalyst and its Precursors

Characterization of Mgcl2/Alcohol Based Ziegler-Natta Catalyst and Its Precursors

Effect of MgCl2 Alcohol-Adduct Modification on Activity of Ziegler-Natta Catalyst

Characterization of a model Ziegler–Natta catalyst for ethylene polymerization

Effect of Internal Electron Donor on the Active Center Distribution in MgCl2-supported Ziegler–Natta Catalyst

Highly active Ziegler-Natta Catalysts for propylene polymerization (2) effects of Al/Ti ratio and polymerization temperature

High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler–Natta catalyst with various cocatalysts

Molecular Weight Distribution of Polyethylene Catalyzed by Ziegler–Natta Catalyst Supported on MgCl2 Doped with AlCl3

Influence of Alkylaluminium on TiClx/MgCl2/THF Catalyst——effect of Al-alkyl on Chemical Structure and Catalyst Performance

Influence of Alkylaluminium on TiCl;/MgCl;/ THF Catalyst Ⅰ.Effects of Catalyst Intermediate Compounds and Alkylaluminium on Catalyst Structure

Effect of Alkylaluminum Cocatalyst on Ethylene/1-Hexene Copolymerization and Active Center Distribution of MgCl2-supported Ziegler-Natta Catalyst

Ethylene/1-hexene copolymerization with MgCl 2 -supported Ziegler–Natta catalysts containing aryloxy ligands. Part I: Catalysts prepared by immobilizing TiCl 3 (OAr) onto MgCl 2 in batch reaction

Formation of Highly Active Ziegler–Natta Catalysts Clarified by a Multifaceted Characterization Approach

Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homopolymerization and ethylene/1-hexene copolymerization

Influence of alkylaluminium on the copolymerization of isoprene and butadiene with supported Ziegler-Natta catalyst

Effects of Alkylaluminum As Cocatalyst on the Active Center Distribution of 1-Hexene Polymerization with MgCl2-supported Ziegler–Natta Catalysts

Effect of AlEt2Cl on the polymerization of isoprene using TiCl4/MgCl2 type Ziegler-Natta catalyst: A DFT study

The Roles of Grignard Reagent in the Ziegler-Natta Catalyst for Propylene Polymerization

Surface effect of the MgCl2 support in Ziegler–Natta catalyst for ethylene polymerization: A computational study

Effect of Alkylaluminium on the Regio- and Stereoselectivity in Copolymerization of Isoprene and Butadiene Using TiCl4/MgCl2 Type Ziegler-Natta Catalyst

Negative Comonomer Effect Induced by TiCl3-like Clusters in MgCl2-based Ziegler-Natta Catalysts

Characterization of MgCl&lt;sub&gt;2&lt;/sub&gt;/Alcohol Based Ziegler−Natta Catalyst and its Precursors