A Crash Course in Geometric Mechanics (T.S. Ratiu)

T.S. Ratiu,R. Tudoran,L. Sbano,E. Sousa Dias,G. Terra

DOI: https://doi.org/10.1017/cbo9780511526367.003

2005-01-01

Abstract:Note: Notes of the courses given by Ratiu Reference CAG-CHAPTER-2005-004 Record created on 2008-11-20, modified on 2017-09-27

What problem does this paper attempt to address?

Geometric Methods in the Modeling of Robot Mechanisms

GENG Gui-bo,XU Chao,YU Xin

DOI: https://doi.org/10.3321/j.issn:1008-9497.2006.02.004

2006-01-01

Abstract:The relationship between the Riemannian geometric framework of Lagrange equation and the topology graph representation of classic mechanical systems is discussed.As the example,robot mechanism is considered,including the topology graph representation,computation of the mathematical model.This method based on Riemann geometry with simpler formulation is more suitable for computer-aided modeling and dynamic analysis.
31 Lectures on Geometric Mechanics

Darryl D. Holm

2024-09-20

Abstract:These lecture notes in geometric mechanics are meant to convey insight through clear definitions and workable examples. The lecture format adopted here is intended to convey the immediacy of the taught course and to be useful as a basis for other courses. The lecture notes comprise: AP = Applications of Pure maths, e.g., Noether's theorem: Lie group symmetry of Hamilton's variational principle implies conservation laws for its equations of motion.\smallskip PA = Purifications of Applied maths, e.g., Euler fluid dynamics describes geodesic flow on the manifold of smooth invertible maps acting on the domain of flow. \smallskip Both AP and PA appear here, though the difference is not mentioned. It is left to the reader to decide whether it was AP or PA in each of the lectures containing well over sixty solved exercises. An aspect of modern applications emphasised here is the use of the composition of evolutionary maps for multi-physics, multi-timescale interactions including waves interacting with flows in the Euler--Poincaré framework in geophysical fluid dynamics (GFD) for ocean and atmosphere dynamics, and in magnetohydrodynamics (MHD) for applications in plasma physics such as magnetic confinement fusion (MFC) and astrophysical processes such as Alfvén waves and gravity waves propagating on the Solar tachocline. The topics covered in each lecture can also be gleaned from its table of contents listed at the onset of each lecture.

Classical Physics,Mathematical Physics,Dynamical Systems,Plasma Physics
A Primer on Geometric Mechanics

Christian Lessig

DOI: https://doi.org/10.48550/arXiv.1206.3302

2012-06-14

Mathematical Physics

Abstract:Geometric mechanics is usually studied in applied mathematics and most introductory texts are hence aimed at a mathematically minded audience. The present note tries to provide the intuition of geometric mechanics and to show the relevance of the subject for an understanding of "mechanics".
Geometry of Mechanics

Miguel C. Muñoz-Lecanda,Narciso Román-Roy

2024-01-23

Abstract:We study the geometry underlying mechanics and its application to describe autonomous and nonautonomous conservative dynamical systems of different types; as well as dissipative dynamical systems. We use different geometric descriptions to study the main properties and characteristics of these systems; such as their Lagrangian, Hamiltonian and unified formalisms, their symmetries, the variational principles, and others. The study is done mainly for the regular case, although some comments and explanations about singular systems are also included.

Mathematical Physics,High Energy Physics - Theory,Differential Geometry
Mecanica Clasica (Classical Mechanics)

H.C. Rosu

DOI: https://doi.org/10.48550/arXiv.physics/9906066

1999-07-04

Abstract:First Internet graduate course on Classical Mechanics in Spanish (Castellano). This is about 80% of the material I covered during the January-June 1999 semester at IFUG in the Mexican city of Leon. English and Romanian versions are in (slow) progress and hopefully will be arXived. For a similar course on Quantum Mechanics, see <a class="link-https" data-arxiv-id="physics/9808031" href="https://arxiv.org/abs/physics/9808031">physics/9808031</a>

Physics Education
Geometric Hydrodynamics: from Euler, to Poincaré, to Arnold

Klas Modin

DOI: https://doi.org/10.48550/arXiv.1910.03301

2019-10-08

Abstract:These are lecture notes for a short winter course at the Department of Mathematics, University of Coimbra, Portugal, December 6--8, 2018. The course was part of the 13th International Young Researchers Workshop on Geometry, Mechanics and Control. In three lectures I trace the work of three heroes of mathematics and mechanics: Euler, Poincaré, and Arnold. This leads up to the aim of the lectures: to explain Arnold's discovery from 1966 that solutions to Euler's equations for the motion of an incompressible fluid correspond to geodesics on the infinite-dimensional Riemannian manifold of volume preserving diffeomorphisms. In many ways, this discovery is the foundation for the field of geometric hydrodynamics, which today encompasses much more than just Euler's equations, with deep connections to many other fields such as optimal transport, shape analysis, and information theory.

Mathematical Physics,Differential Geometry
A short course on Tensor algebra and analysis, with applications to differential geometry

Paolo Vannucci

2024-01-09

Abstract:This text is a support for different courses of the master of Mechanics of the University Paris-Saclay. The content of this text is an introduction, for graduate students, to tensor algebra and analysis. Far from being exhaustive, the text focuses on some subjects, with the intention of providing the reader with the main algebraic tools necessary for a modern course in continuum mechanics. The presentation of tensor algebra and analysis is intentionally done in Cartesian coordinates, that are normally used for classical problems. Then, an entire chapter is devoted to the passage to curvilinear coordinates and to the formalism of co- and contra-variant components. The tensor theory and results are specially applied to introduce some subjects concerning differential geometry of curves and surfaces. Also in this case, the presentation is mainly intended for applications to continuum mechanics.

History and Overview,Mathematical Physics
Geometric quantization; a crash course

Eugene Lerman

DOI: https://doi.org/10.48550/arXiv.1206.2334

2012-06-12

Abstract:Early in 2011 Sam Evens acting on behalf of the organizers of the summer school on quantization at Notre Dame asked me to give a short series of lectures on geometric quantization. These lectures were meant to prepare a group of graduate mathematics students for talks at the conference on quantization which were to follow the summer school. The notes that follow resulted from this request. They are a mostly faithful record of four one-hour lectures (except lecture 4) plus two appendices: the first one recalls bits and pieces of category theory; the second discusses densities.

Symplectic Geometry
New Foundations for Classical Mechanics

David Hestenes

DOI: https://doi.org/10.1007/0-306-47122-1

2002-01-01

Abstract:(revised) This is a textbook on classical mechanics at the intermediate level, but its main purpose is to serve as an introduction to a new mathematical language for physics called geometric algebra. Mechanics is most commonly formulated today in terms of the vector algebra developed by the American physicist J. Willard Gibbs, but for some applications of mechanics the algebra of complex numbers is more efficient than vector algebra, while in other applications matrix algebra works better. Geometric algebra integrates all these algebraic systems into a coherent mathematical language which not only retains the advantages of each special algebra but possesses powerful new capabilities. This book covers the fairly standard material for a course on the mechanics of particles and rigid bodies. However, it will be seen that geometric algebra brings new insights into the treatment of nearly every topic and produces simplifications that move the subject quickly to advanced levels. That has made it possible in this book to carry the treatment of two major topics in mechanics well beyond the level of other textbooks. A few words are in order about the unique treatment of these two topics, namely, rotational dynamics and celestial mechanics.
Mathematical relativity

José Natário

DOI: https://doi.org/10.48550/arXiv.2003.02855

2020-03-06

Abstract:Lecture notes written for a one-semester course in mathematical relativity aimed at mathematics and physics students. Not meant as an introduction to general relativity, but rather as a complementary, more advanced text.

General Relativity and Quantum Cosmology,Mathematical Physics,Analysis of PDEs,Differential Geometry
Treatise on Differential Geometry and its role in Relativity Theory

Subenoy Chakraborty

DOI: https://doi.org/10.48550/arXiv.1908.10681

2019-08-27

General Relativity and Quantum Cosmology

Abstract:This lecture note is hopefully helpful to undergraduate and postgraduate students or beginning Ph.D students both in theoretical physics and in applied mathematics. Modern terminology in differential geometry has been discussed in the book with the motivation of geometrical or pictorial way of thinking. This note is an effort of teaching differential geometry and shows its wide applicability to relativity theory. The problems in this lecture note may be useful to the students
A geometrical introduction to screw theory

E. Minguzzi

DOI: https://doi.org/10.1088/0143-0807/34/3/613

2012-11-21

Abstract:This work introduces screw theory, a venerable but yet little known theory aimed at describing rigid body dynamics. This formulation of mechanics unifies in the concept of screw the translational and rotational degrees of freedom of the body. It captures a remarkable mathematical analogy between mechanical momenta and linear velocities, and between forces and angular velocities. For instance, it clarifies that angular velocities should be treated as applied vectors and that, under the composition of motions, they sum with the same rules of applied forces. This work provides a short and rigorous introduction to screw theory intended to an undergraduate and general readership.

Mathematical Physics
Geometric Inequalities on Riemannian and sub-Riemannian manifolds by heat semigroups techniques

Fabrice Baudoin

DOI: https://doi.org/10.48550/arXiv.1801.05702

2018-01-22

Abstract:In those lecture notes, we review some applications of heat semigroups methods in Riemannian and sub-Riemannian geometry. The notes contain parts of courses taught at Purdue University, Institut Henri Poincaré, Levico Summer School and Tata Institute.

Differential Geometry
A crash course in Pesin theory

Jana Rodriguez Hertz

2023-05-15

Abstract:This is more or less the content of a 5-hour mini-course that I have given at KTH in the program ``Master class in low-dimensional dynamics'' during May 1-5, 2023. It was not intended to be exhaustive but to give the students a grasp of basic ideas in Pesin Theory in a very short period. It is to be taken as a first approximation and as an invitation to study it in more detail. As such, there was a lot of hand-waving, probably there were mistakes and inaccuracies too. If you have any remark, correction, comment, you can contact me at {\tt janarhertz@gmail.com}.

Dynamical Systems
Notes on rate equations in nonlinear continuum mechanics

Daniel Aubram

2024-09-12

Abstract:The paper gives an introduction to rate equations in nonlinear continuum mechanics which should obey specific transformation rules. Emphasis is placed on the geometrical nature of the operations involved in order to clarify the different concepts. The paper is particularly concerned with common classes of constitutive equations based on corotational stress rates and their proper implementation in time for solving initial boundary value problems. Hypoelastic simple shear is considered as an example application for the derived theory and algorithms.

Classical Physics,Computational Engineering, Finance, and Science
Lecture notes in fluid mechanics

Laurent Schoeffel

DOI: https://doi.org/10.48550/arXiv.1407.3162

2016-07-25

Abstract:These lecture notes have been prepared as a course in fluid mechanics up to the presentation of the millennium problem listed by the Clay Mathematical Institute. At the end, a very modern aspect of fluid mechanics is covered concerning the subtle issue of its application to high energetic hadronic collisions.

Fluid Dynamics
Geometry, Mechanics, and Dynamics: The Legacy of Jerry Marsden

Dong Eui Chang,Darryl D. Holm,George Patrick,Tudor Ratiu

2016-01-01

Abstract:This book illustrates the broad range of Jerry Marsdens mathematical legacy in areas of geometry, mechanics, and dynamics, from very pure mathematics to very applied, but always with a geometric perspective. Each contribution develops its material from the viewpoint of geometric mechanics beginning at the very foundations, introducing readers to modern issues via illustrations in a wide range of topics. The twenty refereed papers contained in this volume are based on lectures and research performed during the month of July 2012 at the Fields Institute for Research in Mathematical Sciences, in a program in honor of Marsden's legacy. The unified treatment of the wide breadth of topics treated in this book will be of interest to both experts and novices in geometric mechanics. Experts will recognize applications of their own familiar concepts and methods in a wide variety of fields, some of which they may never have approached from a geometric viewpoint. Novices may choose topics that interest them among the various fields and learn about geometric approaches and perspectives toward those topics that will be new for them as well.
Homogeneous Rigid Body Mechanics with Elastic Coupling

David Hestenes,Ernest D. Fasse

DOI: https://doi.org/10.1007/978-1-4612-0089-5_19

2002-01-01

Abstract:Geometric algebra is used in an essential way to provide a coordinate-free approach to Euclidean geometry and rigid body mechanics that fully integrates rotational and translational dynamics. Euclidean points are given a homogeneous representation that avoids designating one of them as an origin of coordinates and enables direct computation of geometric relations. Finite displacements of rigid bodies are associated naturally with screw displacements generated by bivectors and represented by twistors that combine multiplicatively. Classical screw theory is incorporated in an invariant formulation that is less ambiguous, easier to interpret geometrically, and manifestly more efficient in symbolic computation. The potential energy of an arbitrary elastic coupling is given an invariant form that promises significant simplifications in practical applications.
Lecture Notes in Lie Groups

Vladimir G. Ivancevic,Tijana T. Ivancevic

DOI: https://doi.org/10.48550/arXiv.1104.1106

2011-04-06

Differential Geometry

Abstract:These lecture notes in Lie Groups are designed for a 1--semester third year or graduate course in mathematics, physics, engineering, chemistry or biology. This landmark theory of the 20th Century mathematics and physics gives a rigorous foundation to modern dynamics, as well as field and gauge theories in physics, engineering and biomechanics. We give both physical and medical examples of Lie groups. The only necessary background for comprehensive reading of these notes are advanced calculus and linear algebra.

A Crash Course in Geometric Mechanics (T.S. Ratiu)

Geometric Methods in the Modeling of Robot Mechanisms

31 Lectures on Geometric Mechanics

A Primer on Geometric Mechanics

Geometry of Mechanics

Mecanica Clasica (Classical Mechanics)

Geometric Hydrodynamics: from Euler, to Poincaré, to Arnold

A short course on Tensor algebra and analysis, with applications to differential geometry

Geometric quantization; a crash course

New Foundations for Classical Mechanics

Mathematical relativity

Treatise on Differential Geometry and its role in Relativity Theory

A geometrical introduction to screw theory

Geometric Inequalities on Riemannian and sub-Riemannian manifolds by heat semigroups techniques

A crash course in Pesin theory

Notes on rate equations in nonlinear continuum mechanics

Lecture notes in fluid mechanics

Geometry, Mechanics, and Dynamics: The Legacy of Jerry Marsden

Homogeneous Rigid Body Mechanics with Elastic Coupling

Lecture Notes in Lie Groups