Combination of β-TCP and BMP-2 Gene-Modified Bmscs to Heal Critical Size Mandibular Defects in Rats
J Zhao,J Hu,S Wang,X Sun,L Xia,X Zhang,Z Zhang,X Jiang
DOI: https://doi.org/10.1111/j.1601-0825.2009.01602.x
2010-01-01
Oral Diseases
Abstract:Oral DiseasesVolume 16, Issue 1 p. 46-54 Free Access Combination of β-TCP and BMP-2 gene-modified bMSCs to heal critical size mandibular defects in rats J Zhao, J Zhao Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorJ Hu, J Hu Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorS Wang, S Wang Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorX Sun, X Sun Department of Oral and Maxillofacial Surgery, Affiliated Hospital of Ningxia Medical University, 750004 Ningxia, ChinaSearch for more papers by this authorL Xia, L Xia Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorX Zhang, X Zhang Shanghai Research Institute of Stomatology, Shanghai Key Laboratory of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorZ Zhang, Z Zhang Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorX Jiang, X Jiang Shanghai Research Institute of Stomatology, Shanghai Key Laboratory of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this author J Zhao, J Zhao Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorJ Hu, J Hu Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorS Wang, S Wang Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorX Sun, X Sun Department of Oral and Maxillofacial Surgery, Affiliated Hospital of Ningxia Medical University, 750004 Ningxia, ChinaSearch for more papers by this authorL Xia, L Xia Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorX Zhang, X Zhang Shanghai Research Institute of Stomatology, Shanghai Key Laboratory of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorZ Zhang, Z Zhang Department of Oral and Maxillofacial Surgery, College of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this authorX Jiang, X Jiang Shanghai Research Institute of Stomatology, Shanghai Key Laboratory of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, 200011 Shanghai, ChinaSearch for more papers by this author First published: 16 December 2009 https://doi.org/10.1111/j.1601-0825.2009.01602.xCitations: 37 Xinquan Jiang, Director of Oral Bioengineering Laboratory/Oral Tissue Engineering Laboratory, Vice director of the department of Prosthodontics, Shanghai Research Institute of Stomatology, Ninth People’s Hospital, School of Medicine, Shanghai JiaoTong University, 639 Zhizaoju Road, 200011 Shanghai, China. Tel: 86-21-63135412, Fax: 86-21-63136856, E-mail: [email protected] AboutSectionsPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Abstract Objective: To investigate the effects of mandibular defects repaired by a tissue engineered bone complex with β-tricalcium phosphate (β-TCP) and bone morphogenic protein-2 (BMP-2) gene-modified bone marrow stromal cells (bMSCs). Materials and methods: bMSCs derived from Fisher 344 rats were cultured and transduced with adenovirus AdBMP-2, AdEGFP gene in vitro. Osteogenic differentiation of bMSCs was determined by alkaline phosphatase staining, von Kossa assay and reverse transcription-polymerase chain reaction. Gene transduced or untransduced bMSCs were seeded on β-TCP scaffolds to repair mandibular full thickness defects with a diameter of 5 mm. Eight weeks post-operation, X-ray examination, micro-computerized tomography and histological and histomorphological analysis were used to evaluate the bone healing effects. Results: Alkaline phosphatase staining and mineralized nodules formation were more pronounced in AdBMP-2 group 14 days after gene transduction when compared with that of AdEGFP or untransduced group. The mRNA expression of osteopontin and osteocalcin also significantly increased 9 days after AdBMP-2 gene transduction. Mandibular defects were successfully repaired with AdBMP-2-transduced bMSCs/β-TCP constructs. The percentage of new bone formation in AdBMP-2 group was significantly higher than that of other control groups. Conclusions: Bone morphogenic protein-2 regional gene therapy together with β-TCP scaffold could be used to promote mandibular repairing and bone regeneration. Introduction Mandibular bone defects following trauma or ablative surgery result in the vast demand for new bone to replace and restore the original shape and function of the lost bone. Autogenous bone grafting for skeletal healing remains one of the most common surgical techniques in recent years. However, the main disadvantages associated with this method are potential donor site morbidity, insufficient donor availabilities and difficulty in achieving the desired bone profile (Alam et al, 2001). Advances in osseous tissue bioengineering over the past decade have enabled the in vivo regeneration of living bone by employing various growth factors, osteogenic cells and biocompatible scaffolds—or a combination of these approaches (Vacanti et al, 1988; Langer and Vacanti, 1993; Petite et al, 2000). The bone morphogenic proteins (BMPs) are the most potent bone growth factors that have demonstrated powerful ability to induce orthotopic and heterotopic new bone formation (Cowan et al, 2007; Wikesjöet al, 2008). BMPs, members of the transforming growth factor-β superfamily, have many functions including chemotactic recruitment of particularly undifferentiated mesenchymal cells during bone healing (Lind et al, 1996) and induction of bone marrow stromal cells (bMSCs) differentiation to chondroblasts and osteoblasts. Among them, bone morphogenic protein-2 (BMP-2) is a potent bone stimulator and plays key roles in many steps during bone morphogenesis (Reddi, 1981; Yoon and Lyons, 2004). The effectiveness of BMP-2 in the treatment of bony defects has been evaluated thoroughly in different animal models. Although promising results have been achieved, even this biological factor has already successfully traversed clinical trials, several obstacles such as large dose requirements, high cost, short half-life and poor distribution still have to be circumvented. BMP regional gene therapy has emerged as a possible alternative strategy to express BMPs in target cells for short or long time periods to stimulate osteogenesis maximally (Chen, 2001). Recently, different gene therapy approaches for bone regeneration have been studied, plasmid gene delivery is low in efficiency, while retroviral vectors fail to infect non-dividing cells and have a risk for activation of oncogenes or inactivation of tumour suppressor genes (Verma and Somia, 1997). Adenovirus-mediated gene transduction, generally considered as one of the most efficient gene delivery approaches, using an ex vivo method, could avoid the possibilities of integration of the vector DNA into host chromosomes (Dai et al, 2005). Adenovirus-mediated transfer of BMP-2 had been adopted for the purpose of bone regeneration (Musgrave et al, 1999; Park et al, 2003; Chang et al, 2004; Dai et al, 2005), while it is unknown whether the critical size mandibular bony defects is responsive to BMP-2 regional gene therapy with a delivery carrier of β-tricalcium phosphate (β-TCP). In this study, we investigated the transplantation of a tissue-engineered complex of β-TCP combined with adenoviral encoding BMP-2 (AdBMP-2)-transduced bMSCs to repair the critical size mandibular bone defects. The effects of the AdBMP-2-transduced bMSCs/β-TCP construct were compared with that of adenovirus with enhanced green fluorescent protein (AdEGFP)-transduced bMSCs/β-TCP construct, untreated bMSCs/β-TCP construct and plain β-TCP scaffold. A series of radiographic evaluation, micro-computerized tomography (micro-CT) and histological and histomorphological analysis were employed to measure bone healing for 8 weeks. Materials and methods Culture of rat bMSCs Six-week-old male Fisher 344 rats weighing 125 ± 15 g were obtained from the Ninth People’s Hospital Animal Center (Shanghai, China). The experimental protocol was approved by the Animal Care and Experiment Committee of Shanghai Jiao Tong University, School of Medicine (Shanghai, China). Rat bMSCs were isolated and cultured according to the protocol reported by Maniatopoulos et al (1988). Briefly, both ends of the femora were cut off at the epiphysis and the marrow was flushed out using Dulbecco’s modified Eagle’s medium (DMEM) (Gibco BRL, Grand Island, NY, USA) with 10% FBS (Hyclone, Logan, UT, USA) supplemented with 200 U ml−1 of heparin (Sigma, St. Louis, MO, USA). Cells were cultured in DMEM containing 10% FBS, 100 units ml−1 penicillin and 100 units ml−1 streptomycin, supplemented with 50 μg ml−1 ascorbic acid, 10 mM β-glycerophosphate and 10−8 M dexamethasone at 37°C in an atmosphere of 5% CO2. The medium was changed after 48 h to remove non-adherent cells and renewed three times a week. When 90% confluence was reached, bMSCs were released from the culture substratum using trypsin/EDTA (0.25% w/v trypsin, 0.02% EDTA), and moved to dishes (10 cm in diameter) at a concentration of 1.0 × 105 cell ml−1 in 10 ml. The cells used in this study required three passages each, with about two doublings per subculture stage. Gene transduction of bMSCs The recombinant replication-defective AdBMP-2 and AdEGFP was used for gene transduction under a multiplicity of infection (MOI) of around 80 pfu cell−1. The infected cells were maintained in DMEM with 10% foetal calf serum. Gene transfer efficiency was assessed 72 h after AdEGFP gene transfer under fluorescent microscopy. Gene transfer efficiency was determined by calculating the percentage of EGFP-expressing cells among all the cells present in 10 randomly selected 40× fields (Jiang et al, 2006). Alkaline phosphatase staining bMSCs transduced with AdBMP-2 and AdEGFP, and untransduced were evaluated for alkaline phosphatase (ALP) activity 14 days after transduction as per the manufacturer’s instructions (ALP kit, Hongqiao, Shanghai, China). Briefly, the cells were fixed for 10 min at 4°C and incubated with a mixture of naphthol AS-MX phosphate and fast blue BB salt. Areas that stained purple were designated as positive. von Kossa assay bMSCs plated in triplicate in six-well plates were fixed in 70% ethanol 2 weeks after gene transduction. Cells were stained with von Kossa silver and placed under ultraviolet light for 10 min. Cells were then treated with 5% NaS2O3 for 2 min and washed with distilled water (Aghaloo et al, 2007). Reverse transcription-polymerase chain reaction (RT-PCR) Total cellular RNA extraction was performed on days 3 and 9 after gene transduction using TRIzol Plus RNA purification kit (Invitrogen, Carlsbad, CA, USA) according to the manufacturer’s instructions. 1.0 μg total RNA was used as template for the synthesis of cDNA with OligodT and AMV reverse transcriptase (TaKaRa, Shiga, Japan). The following PCR amplification reaction utilized Taq polymerase and specific primers. All primer sequences were synthesized commercially (Shengong Co. Ltd., Shanghai, China), and the specific primer sets are outlined in Table 1. The PCR products were visualized on 1% (w/v) agarose gel by staining with ethidium bromide and analysed densitometrically using Gel image software. The relative levels of mRNA expression were first normalized to the internal control (β-actin) and then quantified by comparison with those of untransduced bMSCs group. Each sample (n = 3) was assessed in triplicate (n = 3). Table 1. Nucleotide sequences for PCR primer Genes Primer sequence (forward/reverse) Product length (bp) Annealing temperature (°C) Accession number OCN 5′-AAAGCCCAGCGACTCT-3′ 232 55 NM_013414 5′-CTAAACGGTGGTGCCATAGAT-3′ OPN 5′-GACGGCCGAGGTGATAGCTT-3′ 208 55 NM_012881 5′-CATGGCTGGTCTTCCCGTTGC-3′ β-actin 5′-CCTGTGGCATCCACGAA ACT-3′ 307 55 NM_017008 5′-GAAGCATTTGCGGTGGACGA-3′ OCN, osteocalcin; OPN, osteopontin. Preparation of bMSCs/β-TCP construct The β-TCP scaffolds were purchased from Bio-Lu company (Shanghai, China). The average diameter of the pores was 450 μm. In this study, β-TCP disks of 5 mm diameter and 2 mm thickness were used. The method of cell seeding was essentially the same as that reported by Maniatopoulos et al (1988). Briefly, 72 h after gene transfer, bMSCs were released from the culture substratum using trypsin/EDTA (0.25% w/v trypsin, 0.02% EDTA) and were concentrated to 2 × 107 cells ml−1 in serum-free medium. Then bMSCs were seeded onto β-TCP scaffolds by simple dropping of the bMSCs suspension to a final saturation. The bMSCs/β-TCP construct was incubated for an additional 4 h to allow cell attachment in vitro before implantation. In a parallel experiment, 3 × 3 × 3 mm cuboids were prepared and seeded with bMSCs at an identical cell density. After 4 and 24 h of incubation, the constructs were fixed in 2% glutaric dialdehyde for 2 h, cut into two halves and then characterized by scanning electron microscopy (Philips Quanta-200, FEI, Eindhoven, The Netherlands). Surgical procedure For in vivo evaluation of mandibular repairing by these constructs, a total of 11 male Fisher 344 rats, aged 12 weeks, each with a weight of 250 ± 15 g were enrolled. The animals were anaesthetized by intra-peritoneal injection of pentobarbital (Nembutal 3.5 mg/100 g). An incision was made in the skin, followed by plane-by-plane muscle dissection and incision of the periosteum. Bilateral non-healing full thickness defects of 5 mm diameter in the ascending ramus of the mandible were then created with a bur that was cooled continuously by 0.9% saline solution irrigation. The mandibular defects were randomly divided into four groups that received the following implants: (1) β-TCP alone (n = 4); (2) β-TCP with untreated bMSCs (n = 6); (3) β-TCP with bMSCs transduced with AdEGFP (n = 6) and (4) β-TCP with bMSCs transduced with AdBMP-2 (n = 6) (Figure 1). The wound was closed in layers using 4-0 resorbable sutures. Figure 1Open in figure viewerPowerPoint Surgical procedure. (a) A non-healing full thickness defect of 5 mm diameter in the ascending ramus of the mandible was made and then (b) the mandibular defect was filled with a β-tricalcium phosphate disk seeded with gene-modified bone marrow stromal cells Radiographic evaluation and micro-CT After 8 weeks, all the rats were killed by an intra-peritoneally injected overdose of pentobarbital. Then the mandibles were explanted and fixated in 4% phosphate-buffered formalin solution. X-ray images of mandibles were made with a dental X-ray machine (Trophy, Croissy-Bearborg, France), from a distance of 7 cm (230 V, 8 mA) with an exposure time of 0.10 s. The morphology of the reconstructed mandibles was assessed using a micro-CT system (μCT-80; Scanco Medical, Bassersdorf, Switzerland). The CT settings were used as follows: pixel matrix, 1024 × 1024; voxel size, 36 μm; slice thickness, 36 μm. Mandibles were visualized in a pseudo-3D display. Histological and histomorphological analysis After 3 days fixation, the specimens were decalcified in 10% EDTA for 2 weeks. Samples were embedded in paraffin parallel to the sectioned surface. Serial buccal and lingual sagittal cross sections were made for haematoxylin and eosin (H&E) staining and analysed histomorphometrically using Image Pro 5.0 system (Media Cybernetics, Silver Springs, MD, USA). The percentages of new bone area, residual scaffold and fibrous connective tissue were calculated using the average value of the three parallel slices selected from three equally divided paraffin samples defined at buccolingual directions. The mean value of the three measurements was calculated for each graft and was further used to calculate mean values for each group. Statistical analysis Statistically significant differences (P < 0.05) between the various groups were measured by ANOVA and SNK post hoc or Kruskal–Wallis non-parametric procedure, followed by Mann–Whitney U-test for multiple comparisons based on the normal distribution and equal variance assumption test. All statistical analyses were carried out using SPSS statistical software package (version 12; SPSS, Chicago, IL, USA). All the data are expressed as mean ± s.d. Results Cell culture and gene transduction Cellular morphology for each group is shown in Figure 2. The bMSCs grew well after AdEGFP (Figure 2b) and AdBMP-2 (Figure 2c) transduction, without obvious observed cell death. Strong green fluorescence was detected in cells 72 h after AdEGFP transduction and the gene transfer efficiency reached 60∼80% (Figure 2d). Figure 2Open in figure viewerPowerPoint Cell culture and gene transduction. (a) Cellular morphology of untreated control cells. (b) Cellular morphology of adenovirus with enhanced green fluorescent protein (AdEGFP)-transduced cells. (c) Cellular morphology of adenovirus encoding bone morphogenic protein-2-transduced cells. (d) A multiplicity of infection of 80 pfu cell−1 achieved high transfer efficiency about 60∼80% 72 h after transduced by AdEGFP. Bone marrow stromal cells emitted bright and intense green fluorescent. Scale bar = 50 μm Osteogenic differentiation of bMSCs Two weeks after gene transduction, ALP staining and calcium deposits demonstrated by von Kossa staining were greater and more intensive in AdBMP-2-transduced bMSCs (Figure 3c, f) than those in AdEGFP-transduced bMSCs (Figure 3b, e) and untransduced bMSCs (Figure 3a, d), which suggested that AdBMP-2 gene transduction promoted the bMSCs’ differentiation into osteoblastic cells. Figure 3Open in figure viewerPowerPoint In vitro analysis of osteoblastic differentiation after bone marrow stromal cells (bMSCs) transduction with adenovirus encoding bone morphogenic protein-2 (AdBMP-2) and adenovirus with enhanced green fluorescent protein (AdEGFP). Alkaline phosphatase expression between (a) untransduced bMSCs, (b) AdEGFP-transduced bMSCs and (c) AdBMP-2-transduced bMSCs 14 days after gene transduction. von Kossa staining for calcium nodules between (d) untransduced bMSCs, (e) AdEGFP-transduced bMSCs and (f) AdBMP-2-transduced bMSCs 14 days after gene transduction. Scale bar = 100 μm RT-PCR Reverse transcription-polymerase chain reaction demonstrated that AdBMP-2-transduced bMSCs altered their genetic expression during the culture periods. RT-PCR analysis revealed the expected 208 bp osteopontin (OPN) and 232 bp osteocalcin (OCN) amplified DNA band, β-actin being an internal control (Figure 4a). 3 days after transduction, the OPN and OCN mRNA expression from AdBMP-2-transduced bMSCs showed only a slight increase relative to that from AdEGFP-transduced bMSCs, but no significant differences were observed between them. However, following 9 days culture, the relative mRNA expression levels of OPN dramatically increased in AdBMP-2-transduced bMSCs compared with that of AdEGFP-transduced bMSCs, and the data also displayed a significant up-regulation of OCN mRNA expression (Figure 4b). Figure 4Open in figure viewerPowerPoint Effect of adenovirus encoding bone morphogenic protein-2 (AdBMP-2) and adenovirus with enhanced green fluorescent protein (AdEGFP) transduction on osteogenic gene marker expression. (a) Reverse transcription-polymerase chain reaction analysis revealed the expected 208 bp osteopontin and 232 bp osteocalcin DNA band, β-actin being an internal control. C: untransduced bone marrow stromal cells (bMSCs); E: AdEGFP-transduced bMSCs; B: AdBMP-2-transduced bMSCs. (b) DNA OD values of bMSCs transduced with AdBMP-2 were higher than those of the corresponding control groups. The significant differences were observed in the relative mRNA expression levels of osteopontin and osteocalcin when bMSCs were transduced with AdBMP-2 as compared with AdEGFP (*P < 0.05, **P < 0.01) Scanning electron microscopy Four hours after the bMSCs were combined with the implant, cells could be seen attaching to the inner surface of the scaffold in vitro (Figure 5a). After 24 h, cells were fully spreading and growing (Figure 5b). Nominal differences in cellular adhesion and proliferation were observed among bMSCs transduced with AdBMP-2, AdEGFP or untransduced. Additionally, these results suggested that β-TCP was a suitable biomaterial for the proposed in vivo studies as it facilitated bMSCs’ initial attachment onto its surface, spreading and subsequent growth. Figure 5Open in figure viewerPowerPoint Scanning electron microscopic evaluation of the β-tricalcium phosphate scaffold microstructure and biocompatibility. (a) Four hours after the bone marrow stromal cells (bMSCs) were seeded onto the scaffold, cells could be seen attaching to the inner side of the scaffold. Scale bar = 100 μm. (b) One day after seeding, bMSCs were observed spreading along the scaffold surfaces. Scale bar = 100 μm Radiographic evaluation and micro-computerized tomography To evaluate the new bone formation, X-ray images were taken at 8 weeks after surgery. Representative photographs of each group are shown in Figure 6. Photographs showed radiopacities at the defect sites in β-TCP alone group (Figure 6a), untreated bMSCs/β-TCP group (Figure 6b) and AdEGFP-transduced bMSCs/β-TCP group (Figure 6c), but indicated a high increase in AdBMP-2-transduced bMSCs/β-TCP group (Figure 6d). Figure 6Open in figure viewerPowerPoint Radiographic evaluation and micro-computerized tomography of the repaired mandible. Representative photographs showed radiopacities at the defect sites in (a) β-tricalcium phosphate (β-TCP) alone group, (b) untreated bone marrow stromal cells (bMSCs)/β-TCP group, (c) adenovirus with enhanced green fluorescent protein (AdEGFP)-transduced bMSCs/β-TCP group but indicated highly increase in (d) adenovirus encoding bone morphogenic protein-2 (AdBMP-2)-transduced bMSCs/β-TCP group. Micro-computerised tomography images show the morphology of the newly formed bone in (e) β-TCP alone group, (f) untreated bMSCs/β-TCP group, (g) AdEGFPtransduced bMSCs/β-TCP group and (h) the new bone formed on the lateral side of the mandibles equivalent to the cortical level on pseudo-3D displays when the defects received AdBMP-2-transduced bMSCs/β-TCP construct. Scale bar = 0.5 cm The morphology of the repaired mandibular defects was reconstructed using micro-CT. Bone formation was less pronounced for defects filled with untreated bMSCs/β-TCP (Figure 6f) and AdEGFP-transduced bMSCs/β-TCP (Figure 6g), but still advanced when compared with the implantation of β-TCP alone (Figure 6e). Substantial new bone formation was observed after 8 weeks in the critical size defects which received AdBMP-2-transduced bMSCs/β-TCP construct, with induced bone volume on the lateral side of the mandibles that equal to the cortical level on pseudo-3D displays (Figure 6h). Histological examination and histomorphological analysis Radiographic and micro-CT findings were confirmed through subsequent histological analysis of repaired mandibular defects. Eight weeks after surgery, the implants were harvested, sectioned and evaluated histomorphologically. Samples with β-TCP alone group were found to contain more fibrous connective tissue in the area of defects, with only a little immature bone formation at the defect margins. Large amount of multinucleated giant cells (MNGCs) were seen in contact with the surface of β-TCP (Figure 7a, e). In the untreated bMSCs/β-TCP (Figure 7b, f) and AdEGFP-transduced bMSCs/β-TCP groups (Figure 7c, g), histological analysis showed a small amount of irregularly arranged woven bone tissue at the centre pores of β-TCP scaffold, and fibrous connective tissue was still frequently observed. In the defects filled with implantation of AdBMP-2-transduced bMSCs/β-TCP construct, mature newly formed bone tissue with few fibrous connective tissues infiltration was observed in the β-TCP pores at both centre and marginal area. Bone marrow also largely formed accompanied with the bony ingrowth (Figure 7d, h). The percentage of new bone area after 8 weeks was 4.72 ± 1.74% in β-TCP group, 10.12 ± 2.82% in untransduced bMSCs group, 12.22 ± 3.63% in AdEGFP-transduced bMSCs/β-TCP group and 31.83 ± 5.35% in AdBMP-2-transduced bMSCs/β-TCP group, respectively. The percentage of new bone area in AdBMP-2 group was significantly higher than those of AdEGFP-transduced, untransduced and β-TCP alone groups 8 weeks post-operation (Figure 8a). The percentage of fibrous connective tissue was 67.89 ± 7.44% in β-TCP group, 58.13 ± 5.57% in untransduced bMSCs group, 64.78 ± 6.85% in AdEGFP-transduced bMSCs/β-TCP group and 9.04 ± 2.32% in AdBMP-2-transduced bMSCs/β-TCP group, respectively (Figure 8b). The percentage of residual scaffold was 24.38 ± 5.59% in β-TCP group, 27.32 ± 3.79% in untransduced bMSCs group, 22.53 ± 2.94% in AdEGFP-transduced bMSCs/β-TCP group and 32.23 ± 4.39% in AdBMP-2-transduced bMSCs/β-TCP group, respectively (Figure 8c). The lowest percentage of fibrous connective tissue and the highest percentage of residual scaffold were found in AdBMP-2-transduced bMSCs/β-TCP group. Figure 7Open in figure viewerPowerPoint Representative histological images of repaired mandibles at 8 weeks post-operation. The microscopic view of repaired area in each group was shown: (a) In the β-tricalcium phosphate (β-TCP) alone group, more fibrous connective tissue was found in the area of defects with only a little immature bone formation occurred at the defect margins. (b) In the untreated bone marrow stromal cells (bMSCs)/β-TCP and (c) adenovirus with enhanced green fluorescent protein (AdEGFP)-transduced bMSCs/β-TCP group, histological analysis showed a small amount of irregularly arranged woven bone tissue at the centre pores of β-TCP scaffold and fibrous connective tissue was still frequently observed. (d) In the adenovirus encoding bone morphogenic protein-2 (AdBMP-2)-transduced bMSCs/β-TCP group, newly formed mature bone tissue with few fibrous connective tissues infiltration was observed in the β-TCP pores in both center and marginal area. Scale bar = 1 mm. The high magnified photomicrograph of each group: (e) β-TCP alone group, (f) untreated bMSCs/β-TCP group, (g) AdEGFP-transduced bMSCs/β-TCP group, and (h) AdBMP-2-transduced bMSCs/β-TCP group. BM: bone marrow; FCT: fibrous connective tissue; NB: new bone; OS: osteoid; SC: scaffold. White arrow shows the ingrowth osteoblast. Black arrow shows the multinucleated giant cells. Arrow head shows the blood vessels. Scale bar = 200 μm Figure 8Open in figure viewerPowerPoint (a) Histomorphometirc analysis of the new bone area, (b) fibrous connective tissue and (c) residual scaffold for four groups at 8 weeks post-operation (*P < 0.05 vsβ-tricalcium phosphate (β-TCP) alone group, **P < 0.01 vsβ-TCP alone group) Discussion Using a critical size mandibular bony defects model in rats (Schliephake et al, 2008), we demonstrated that tissue-engineered bone with BMP-2 gene-modified bMSCs and a biodegradable β-TCP scaffold achieved an effective repair of the mandibular defects compared with that of AdEGFP-transduced bMSCs/β-TCP, untreated bMSCs/β-TCP construct and β-TCP scaffold alone. Gene therapy, which involves the transfer of genes into individuals for therapeutic purposes, can be performed by either an ex vivo or an in vivo gene-transfer approach (Chen, 2001). In vivo gene therapy through direct injection of the recombinant adenoviral vector is a simple approach, but there are concerns about problems with transduction efficiency and the induction of an immune response to local expression of viral proteins. With the ex vivo method, the gene is transferred to cells in vitro, and re-implanted into a specific anatomic site. Main advantages of ex vivo approach include direct delivery of the osteoinductive gene to the desired site, providing a period of sustained BMP production and it is safer than in vivo techniques, as it avoids the inoculation of viral DNA complexes directly into the body (Scaduto and Lieberman, 1999; Dai et al, 2005). Adenov
What problem does this paper attempt to address?
-
Evaluation of Bone Regeneration by Β Tricalcium Phosphate/Collagen Scaffold Loaded with Bone Morphogenetic Proteins 2 Plasmid in Rat Cranial Defect
李娟,郑闱颖,卢岩,俞兰,林军
DOI: https://doi.org/10.14136/j.cnki.issn1673-2812.2013.02.006
2013-01-01
Abstract:The osteoinductive properties of beta tricalcium phosphate(β-TCP)/collagen scaffold loaded with morphogenetic protein 2(BMP-2) plasmid(100μg) were evaluated in vivo.BMP-2 gene-modified β-TCP/collagen scaffolds(n=8) were used to repair critically-sized defects(5mm in diameter) in the calvaria of rats,and pure β-TCP/collagen scaffolds(n=8) and empty defects(n=8) served as controls.The quality of newly regenerated bone was assessed by histological/histomorphometric analysis.The histological analysis revealed that porous β-TCP/collagen scaffold degraded completely at 12 weeks.Defects in BMP-2 DNA group healed completely whereas a significantly less bone ingrowth was observed in pure scaffolds by 12 weeks(p0.05).Immunohistochemistry analysis indicated that the expression of BMP-2 was significantly stronger in BMP-2DNA group than the controls(p0.05).In addition,compared to pure scaffold groups or blank groups,rats in BMP-2 gene-modified scaffold group showed significantly more bone generation by histomorphometric analysis(P 0.05).We conclude that porous β-TCP/collagen scaffold loaded with BMP-2 DNA is an appropriate candidate for bone engineering.
-
Controlled Release of Bone Morphogenetic Protein-2 Augments the Coupling of Angiogenesis and Osteogenesis for Accelerating Mandibular Defect Repair
Hao Yao,Jiaxin Guo,Wangyong Zhu,Yuxiong Su,Wenxue Tong,Lizhen Zheng,Liang Chang,Xinluan Wang,Yuxiao Lai,Ling Qin,Jiankun Xu
DOI: https://doi.org/10.3390/pharmaceutics14112397
IF: 6.525
2022-11-08
Pharmaceutics
Abstract:Reconstruction of a mandibular defect is challenging, with high expectations for both functional and esthetic results. Bone morphogenetic protein-2 (BMP-2) is an essential growth factor in osteogenesis, but the efficacy of the BMP-2-based strategy on the bone regeneration of mandibular defects has not been well-investigated. In addition, the underlying mechanisms of BMP-2 that drives the bone formation in mandibular defects remain to be clarified. Here, we utilized BMP-2-loaded hydrogel to augment bone formation in a critical-size mandibular defect model in rats. We found that implantation of BMP-2-loaded hydrogel significantly promoted intramembranous ossification within the defect. The region with new bone triggered by BMP-2 harbored abundant CD31+ endomucin+ type H vessels and associated osterix (Osx)+ osteoprogenitor cells. Intriguingly, the new bone comprised large numbers of skeletal stem cells (SSCs) (CD51+ CD200+) and their multi-potent descendants (CD51+ CD105+), which were mainly distributed adjacent to the invaded blood vessels, after implantation of the BMP-2-loaded hydrogel. Meanwhile, BMP-2 further elevated the fraction of CD51+ CD105+ SSC descendants. Overall, the evidence indicates that BMP-2 may recapitulate a close interaction between functional vessels and SSCs. We conclude that BMP-2 augmented coupling of angiogenesis and osteogenesis in a novel and indispensable way to improve bone regeneration in mandibular defects, and warrants clinical investigation and application.
pharmacology & pharmacy
-
Injectable BMP-2 gene-activated scaffold for the repair of cranial bone defect in mice.
Kai Sun,Hang Lin,Ying Tang,Shiqi Xiang,Jingwen Xue,Weifeng Yin,Jian Tan,Hao Peng,Peter G Alexander,Rocky S Tuan,Bing Wang
DOI: https://doi.org/10.1002/sctm.19-0315
2020-01-01
Stem Cells Translational Medicine
Abstract:Tissue engineering using adult human mesenchymal stem cells (MSCs) seeded within biomaterial scaffolds has shown the potential to enhance bone healing. Recently, we have developed an injectable, biodegradable methacrylated gelatin-based hydrogel, which was especially effective in producing scaffolds in situ and allowed the delivery of high viable stem cells and gene vehicles. The well-demonstrated benefits of recombinant adeno-associated viral (rAAV) vector, including long-term gene transfer efficiency and relative safety, combination of gene and cell therapies has been developed in both basic and translational research to support future bone tissue regeneration clinical trials. In this study, we have critically assessed the applicability of single-step visible light (VL) photocrosslinking fabrication of gelatin scaffold to deliver rAAV encodinghuman bone morphogenetic protein-2(BMP-2) gene to address the need for sustained BMP-2 presence localized within scaffolds for the repair of cranial bone defect in mouse model. In this method, rAAV-BMP-2 and human bone marrow-derived MSCs (hBMSCs) were simultaneously included into gelatin scaffolds during scaffold formation by VL illumination. We demonstrated that the subsequent release of rAAV-BMP-2 constructs from the scaffold matrix, which resulted in efficient in situ expression ofBMP-2gene by hBMSCs seeded within the scaffolds, and thus induced their osteogenic differentiation without the supplement of exogenous BMP-2. The reparative capacity of this novel stem cell-seeded and gene-activated scaffolds was further confirmed in the cranial defect in the severe combined immunodeficiency mice, revealed by imaging, histology, and immunohistochemistry at 6 weeks after cranial defect treatment.
-
524. Injectable BMP-2 Gene-Activated Scaffold for the Repair of Mouse Cranial Bone Defect
Hang Lin,Ying Tang,Kai Sun,Jingwen Xue,Weifeng Yin,Bing Wang,Rocky Tuan
DOI: https://doi.org/10.1016/s1525-0016(16)33333-0
IF: 12.91
2016-01-01
Molecular Therapy
Abstract:Introduction: A major requirement in bone tissue engineering is the persistent and robust promotion of osteogenesis, which requires sustained stimulation with osteoinductive factors, such as bone morphogenetic protein-2 (BMP-2). However, the direct application of these factors remains challenging due to their short half-life and rapid systemic clearance. Given the well demonstrated benefits of recombinant adeno-associated viral (rAAV) vector, including long-term gene transfer efficiency and relative safety, rAAV-based therapies have been developed in both basic and translational research. However, traditional ex vivo gene transduction process is time consuming and requires multiple steps of cell culture. In addition, rAAV shows inconsistent transfection efficacy in primary cells. In this study, we co-packed rAAV-BMP-2 and human bone marrow stem cells (hBMSCs) into a gelatin scaffolds through one-step visible light-based phtocorsslinking (PXL), and tested their application for bone regenerationi. We hypothesize that the concentrated and localized release of rAAV-BMP-2 from the scaffold matrix results in higher transfection efficacy and BMP-2 expression in hBMSCs seeded within the scaffolds, thus enhancing their osteogenic differentiation and bone formation upon implantation in bone defect. Methods: hBMSCs were obtained with IRB approval from total joint arthroplasty patient. The rAAV6-BMP-2 and rAAV6-GFP reporter (as control) vectors were designed and prepared using an established protocol in our laboratory. PXL was performed using 10% gelatin and 10×106 hBMSCs/ml with different amount of rAAV6-GFP. Transfection efficiency was determined by counting GFP-positive cells ratio as well as assessing cell viability. At an optimal ratio, rAAV-BMP-2 and hBMSCs were included into gelatin through PXL. At different time point, BMP-2 production and rAAV6 release kinetics were analyzed. The osteogenesis of hBMSCs was assessed at day 28 by real time PCR and histological staining. In animal study, a 0.5 cm diameter critical size of cranial bone defect model was generated in SCID mice and then the constructs described above were transplanted. Micro-CT imaging and histological staining were used to evaluate the skull bone healing process up to 6 weeks. Results: Both rAAV and hBMSCs survived during the scaffold fabrication process. 10×104 rAAV/hBMSCs was shown to be the optimal ratio in maintaining cell viability and achieving transduction efficiency. After in situ transfection within scaffolds, hBMSCs produced higher BMP-2 amount than those subjected to traditional ex vivo transduction process, and underwent robust osteogenesis as well. In animal study, micro-CT imaging results indicated that rAAV BMP-2 & hBMSCs-activated gelatin scaffolds effectively promoted bone regeneration in mice cranial bone defect, in a manner significantly superior to that of scaffolds loaded with hBMSCs/BMP-2 protein, and was remarkably compatible to scaffolds loaded with hBMSCs previously ex vivo transduced by rAAV-BMP-2. The histological staining further confirmed the efficacious bone formation from rAAV BMP-2 & hBMSCs loaded scaffold. The results shown here thus demonstrate the feasibility of combining gene and cell therapy with biomaterial engineering via a single-step fabrication and its application for the repair of bone defect.
-
Novel Synthesized Nanofibrous Scaffold Efficiently Delivered hBMP-2 Encoded in Adenoviral Vector to Promote Bone Regeneration
Yang Zhu,Daowei Li,Kai Zhang,Liming Jiang,Ce Shi,Jiaozi Fangteng,Changyu Zheng,Bai Yang,Hongchen Sun
DOI: https://doi.org/10.1166/jbn.2017.2361
2017-01-01
Journal of Biomedical Nanotechnology
Abstract:Treatment of bone defect, especially large bone defect, is still a challenge for physicians clinically. Bone morphogenetic protein 2 (BMP-2) can induce osteoblast differentiation and promote new bone formation. Recently, nanomaterials have been widely used as a carrier to hold and deliver biomolecules, like human bone morphogenetic protein 2 gene (hBMP-2) in target cells/tissues. Most nanomethods, however, need further modification in order to work more reliably in clinical applications. Therefore, in this study, we created a novel poly(lactic-co-glycolic acid [PLGA]) nanofibrous scaffold using an electrospinning technique; then, using a lyophilization process to allow nanofibrous scaffold to adsorb hBMP-2 adenoviral vector, AdCMV-hBMP2. Results indicate that the lyophilized poly(lactic-co-glycolic acid) nanofibrous scaffold/AdCMV-hBMP2 can efficiently release and transduce cells in vitro and in vivo, and secrete functional hBMP-2 to promote osteogenic differentiation in vitro, and new bone generation in vivo. Importantly, the amount of newly formed bone covered >80% of the bone defect area 8 weeks post-implantation in vivo, in which the defect could not be repaired without any treatment in general. Our data demonstrate that the lyophilized PLGA nanofibrous scaffold/AdCMV-hBMP2 created herein stably and efficiently release functional viral vector to transduce local cells, resulting in secretion of hBMP-2 and promote new bone formation in vivo. Our new nanodelivery method has potential clinical application for the repair of large bone defects.
-
Application of bone morphogenetic proteins in the treatment of clinical oral and maxillofacial osseous defects
P J Boyne
Abstract:Background: Commonly occurring extensive osseous defects in the oral and maxillofacial area are seen following complete or partial resection of the mandible and other facial bones in oncologic surgery or following traumatic injury. Autogenous osseous grafts have been used to restore these defects. Additionally, bone graft substitute materials and autogenous osseous grafts are applied to congenital defects such as cleft palate, facial clefts, and facial asymmetry. We have simulated these types of defects in appropriately aged Macaca fascicularis and Macaca mulatta monkeys to study the efficacy of using bone morphogenetic protein (BMP) as an osseous inductor. The objective of these studies was to obtain information on the feasibility of employing bone inductors to regenerate large continuity critical-sized maxillofacial defects without using bone grafts. Methods and results: In one study, involving eight animals, the body of the mandible was removed, simulating hemi-mandibulectomy defects following traumatic bone loss or oncologic surgery. Recombinant human (rh) BMP-2 (Genetics Institute, Cambridge, Massachusetts) in a collagen carrier (Colla-Tec Inc., Plainsboro, New Jersey) then was placed in the hemi-mandibulectomy defect with use of titanium orthopaedic mesh fixation (Sofamor Danek-Medtronic, Memphis, Tennessee). Entire bone regeneration of the defect was observed 5 and 6 months postoperatively. In another group of subhuman primates, the restored area was functionally stimulated at the 5-month post-BMP implantation level by placement of intraoral titanium implants. The animals were allowed to function for 8 months with these titanium implants. Microscopic results showed increased density, bone volume, and thickness of the trabecular bone pattern. The bone cortex in the restored defect also increased in thickness compared with the nonsurgical areas. To evaluate the effect of rhBMP-2 in aging individuals, a group of six Macaca animals over 20 years of age received the same type of mandibular resection followed by BMP grafting with functional stimulation by mastication on root form implants placed at 5 months after BMP implantation. The entire mandible regenerated as in the younger group of animals; therefore, age did not appear to be a factor in the reparative process. Thus, the number of stem cells supposedly reduced with increasing age did not appear to affect the overall result of BMP-induced bone regeneration. Additionally, in applying the inductor material to younger monkeys (1-1 1/2 years of age), the rhBMP-2 was placed in simulated bilateral cleft palate defects. On one side, the rhBMP-2 was placed with use of the collagen sponge carrier. The autogenous graft most frequently used at present for regeneration of the osseous defects of maxillary clefts is iliac crest particulate cancellous bone. As a control graft on the contralateral side, therefore, autogenous particulate bone and marrow was placed. At the end of 3 months, the cleft side receiving the BMP-2 showed complete osseous restoration of the simulated cleft. The autogenously grafted side exhibited bone repair but incomplete regeneration of the bone defect at the early (3-months postoperative) stage of healing. Conclusions and clinical relevance: The results of these three subhuman primate defect studies--(a) mandibular resection defects in middle-aged Macaca fascicularis animals, (b) mandibular resection defects in Macaca fascicularis animals over 20 years of age, and (c) simulated bilateral clefts in Macaca mulatta animals 1 1/2 years of age (comparable with a 5-year-old child)--were very encouraging. Histomorphometric analysis in all of these investigations indicated that the use of rhBMP-2 in bone repair without the use of bone grafting materials will offer a new method of osseous reconstruction in clinical facial bone defects.
-
Enhanced Effects of BMP‐binding Peptide Combined with Recombinant Human BMP‐2 on the Healing of a Rodent Segmental Femoral Defect
Yuichiro Morishita,Masatoshi Naito,Masashi Miyazaki,Wubing He,Guizhong Wu,Feng Wei,Chananit Sintuu,Henry Hymanson,Elsa J. Brochmann,Samuel S. Murray,Jeffrey C. Wang
DOI: https://doi.org/10.1002/jor.20970
2009-01-01
Journal of Orthopaedic Research
Abstract:BMP‐binding peptide (BBP) enhances the osteogenic activity of recombinant human bone morphogenetic protein‐2 (rhBMP‐2), but the mechanism underlying the enhancement remains unclear. We aimed to elucidate the potential enhanced efficacy of BBP using critical‐sized segmental femoral bone defects in rats. Seventy defects in seven groups of rats were filled with various amounts (0, 2, 5, and 10 µg) of rhBMP‐2 with or without 1000 µg BBP. Radiographs were obtained after 4 and 8 weeks. The animals were euthanized at 8 weeks, and femoral specimens were assessed manually, evaluated for bone volume using microcomputed tomography, and subjected to histological or biomechanical analysis. Although 10 µg rhBMP‐2 yielded consistent results in terms of bone healing and quality of bone repair across the segmental defect, lower doses of rhBMP‐2 failed to induce satisfactory bone healing. However, the combined administration of lower doses of rhBMP‐2 and BBP induced the formation of significantly large amounts of bone. Our results suggest that the combined administration of rhBMP‐2 and BBP facilitates bone healing and has potential clinical applications. © 2009 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 28:258–264, 2010
-
Bone Morphogenetic Protein 2 Promotes Bone Formation in Bone Defects in Which Bone Remodeling Is Suppressed by Long-Term and High-Dose Zoledronic Acid
Young Jae Moon,Seongyup Jeong,Kwang-Bok Lee
DOI: https://doi.org/10.3390/bioengineering10010086
IF: 5.046
2023-01-09
Bioengineering
Abstract:The use of long-term and high-dose bisphosphate is associated with severely suppressed bone turnover and the delayed union of fractures. However, therapeutic methods to overcome the negative effects of bisphosphonate use are lacking. Bone morphogenetic proteins (BMPs) are powerful osteoinductive proteins. The development of the delivery system using BMP has been verified to have an excellent effect on fracture healing and the enhancement of osteointegration. We hypothesized that BMPs had similar effects as autografts in patients with decreased bone healing potential due to long-term bisphosphonate treatment. Forty rats were divided into the following four groups depending upon the materials implanted into the femoral defect after ten weeks of bisphosphonate (zoledronic acid) injections: Group I: absorbable collagen sponge (control); group II: demineralized freeze-dried bone graft; group III: autogenous bone graft; and group IV: rhBMP-2 with an absorbable collagen sponge. Radiographic union, micro-computed tomography (CT) analysis, manual palpation, and histologic analysis were evaluated. The radiographic union rate, manual union rate, and micro-CT bone volume in groups III and IV were significantly higher than those in groups I and II. Groups III and IV showed similar results to each other. Although the amount of immature bone in the BMP-treated group was large, the effect was similar to that of autografts in the bone defect model in which bone turnover was severely reduced by bisphosphonate treatment. BMP might be a good substitute for autografts in patients with decreased bone healing potential due to long-term bisphosphonate treatment.
-
Dual delivery of BMP-2 and bFGF from a new nano-composite scaffold, loaded with vascular stents for large-size mandibular defect regeneration
Jiansheng Su,Hongzhen Xu,Jun Sun,Xue Gong,Hang Zhao
DOI: https://doi.org/10.3390/ijms140612714
2013-06-18
Abstract:The aim of this study was to investigate the feasibility and advantages of the dual delivery of bone morphogenetic protein-2 (BMP-2) and basic fibroblast growth factor (bFGF) from nano-composite scaffolds (PLGA/PCL/nHA) loaded with vascular stents (PLCL/Col/nHA) for large bone defect regeneration in rabbit mandibles. Thirty-six large bone defects were repaired in rabbits using engineering bone composed of allogeneic bone marrow mesenchymal stem cells (BMSCs), bFGF, BMP-2 and scaffolds composed of PLGA/PCL/nHA loaded with PLCL/Col/nHA. The experiments were divided into six groups: BMSCs/bFGF/BMP-2/scaffold, BMSCs/BMP-2/scaffold, BMSCs/bFGF/scaffold, BMSCs/scaffold, scaffold alone and no treatment. Sodium alginate hydrogel was used as the carrier for BMP-2 and bFGF and its features, including gelling, degradation and controlled release properties, was detected by the determination of gelation and degradation time coupled with a controlled release study of bovine serum albumin (BSA). AlamarBlue assay and alkaline phosphatase (ALP) activity were used to evaluate the proliferation and osteogenic differentiation of BMSCs in different groups. X-ray and histological examinations of the samples were performed after 4 and 12 weeks post-implantation to clarify new bone formation in the mandible defects. The results verified that the use of sodium alginate hydrogel as a controlled release carrier has good sustained release ability, and the combined application of bFGF and BMP-2 could significantly promote the proliferation and osteogenic differentiation of BMSCs (p < 0.05 or p < 0.01). In addition, X-ray and histological examinations of the samples exhibited that the dual release group had significantly higher bone formation than the other groups. The above results indicate that the delivery of both growth factors could enhance new bone formation and vascularization compared with delivery of BMP-2 or bFGF alone, and may supply a promising way of repairing large bone defects in bone tissue engineering.
-
Bone Regeneration with BMP-2 Gene-modified Mesenchymal Stem Cells Seeded on Nano-hydroxyapatite/Collagen/Poly(L-Lactic Acid) Scaffolds
J. L. Dong,L. X. Li,W. D. Mu,Y. H. Wang,D. S. Zhou,W. Hao,D. B. Zou,K. Hu,J. Li,F. Z. Cui
DOI: https://doi.org/10.1177/0883911510380436
2010-01-01
Journal of Bioactive and Compatible Polymers
Abstract:In this study, the capacity of bone morphogenetic protein 2 (BMP-2) gene-transfected bone marrow-derived mesenchymal stem cells (MSCs) in combination with nano-hydroxyapatite/collagen/poly(L-lactic acid) (nHAC/ PLA) to improve the repair of bone defects in rabbit was explored. MSCs from New Zealand White rabbits were cultured and injected with pIRES2-EGFP-hBMP-2 or pIRES2-EGFP by electroporation. After the transfer efficiency was determined through the expression of EGFP, the MSCs were seeded on scaffolds to generate an in vitro 3D cell/scaffold construct. The adhesion and proliferation of the MSCs cultured in the scaffold was assessed by SEM. The cellular constructs obtained were allografted into the 15mm critical-sized segmental bone defects in the radius of New Zealand White rabbits for 12 weeks. The bone regeneration was assessed by radiographical and histological analyses. In vitro, nHAC/PLA facilitated MSC adhesion and proliferation on the scaffold, and gene transfer efficiency reached a maximum of 35.5 +/- 3.8%. In vivo, the implantation of BMP-2 transfected MSCs/nHAC/PLA construct significantly enhanced the formation of new bone in the segmental defect, compared to the control groups. This novel 3D BMP-2 transfected MSCs/nHAC/PLA construct has the potential for bone repair by genetic tissue engineering approach.
-
Cell-permeable bone morphogenetic protein 2 facilitates bone regeneration by promoting osteogenesis
Mingu Kang,Seokwon Lee,Jong-pil Seo,Eun-bee Lee,Daye Ahn,Jisoo Shin,Young-Ki Paik,Daewoong Jo
DOI: https://doi.org/10.1016/j.mtbio.2024.100983
IF: 8.2
2024-02-03
Materials Today Bio
Abstract:The use of the FDA-approved osteoinductive growth factor BMP2 is widespread for bone regeneration. However, its clinical application has been hindered by limitations in cell permeability and a short half-life in circulation. To address this issue, we have developed a modified version of BMP2, referred to as Cell Permeable (CP)-BMP2, which possesses improved cell permeability. CP-BMP2 incorporates an advanced macromolecular transduction domain (aMTD) to facilitate transfer across the plasma membrane, a solubilization domain, and recombinant human BMP2. Compared to traditional rhBMP2, CP-BMP2 exhibits enhanced cell permeability, solubility, and bioavailability, and activates Smad phosphorylation through binding to BMP receptor 2. The effectiveness of CP-BMP2 was evaluated in three animal studies focusing on bone regeneration. In the initial study, mice and rabbits with critical-size calvarial defects received subcutaneous (SC) injections of CP-BMP2 and rhBMP2 (7.5 mg/kg, 3 injections per week for 8 weeks).Following 8 weeks of administration, CP-BMP2 demonstrated a remarkable 65 % increase in bone formation in mice when compared to both the vehicle and rhBMP2. Moreover, rabbits exhibited faster bone formation, characterized by a filling pattern originating from the center. In a subsequent study involving injured horses, hind limb bones treated with CP-BMP2 exhibited an 85 % higher bone regeneration rate, as evidenced by Micro-CT results, in contrast to horses treated with the vehicle or rhBMP2 (administered at 150 μg/defect, subcutaneously, once a week for 8 weeks, without a scaffold). These results underscore the potential of CP-BMP2 to facilitate rapid and effective healing. No noticeable adverse effects, such as ectopic bone formation, were observed in any of the studies. Overall, our findings demonstrate that CP-BMP2 holds therapeutic potential as a novel and effective osteogenic agent.
engineering, biomedical,materials science, biomaterials
-
Enhanced bone formation of rat mandibular bone defects with collagen membranes loaded on bone morphogenetic protein-9
Hiroki Kondo,Tadahiro Takayama,Takashi Onizawa,Shunsuke Isobe,Natsuko Tanabe,Naoto Suzuki,Seiichi Yamano,Shuichi Sato
DOI: https://doi.org/10.1016/j.jds.2024.04.004
IF: 3.719
2024-04-19
Journal of Dental Sciences
Abstract:Background/purpose Bone morphogenetic protein-9 (BMP-9) has demonstrated multiple advantages in promoting osteogenesis. Our previous findings have indicated that the use of an absorbable collagen membrane (ACM) as a carrier for growth factors is effective in stimulating bone regeneration. The objective of this study was to assess the synergistic impact of BMP-9 incorporated into ACM (ACM/BMP-9) on bone formation within rat mandibular bone defects. Materials and methods Circular bone defects of critical size were surgically induced on both sides of the rat mandibular bone, with subsequent random allocation into distinct groups: control, ACM alone, and ACM loaded with low (0.5 μg) or high (2.0 μg) concentrations of BMP-9. We conducted real-time in vivo micro-computerized tomography scans at the baseline and at 2, 4, and 6 weeks, and measured the volume of newly formed bone (NFB), bone mineral density (BMD) of NFB, and the closure percentage of the NFB area. Histological and histomorphometric analyses were performed at 6 weeks. Results Real-time assessment revealed notably higher levels of bone volume, BMD, and closure percentage in the NFB area for the groups treated with ACM/BMP-9 compared to the control and ACM groups. Within the high concentration of BMP-9 group, the volume and BMD of NFB exhibited a significant increase at 6 weeks compared to baseline. Histological examination confirmed the existence of osteoblasts, osteocytes, and blood vessels within the NFB. Conclusion Considering the limitations of this research, the real-time evaluation finding indicates that ACM/BMP-9 effectively promotes bone formation in critical-size mandibular defects in rats.
dentistry, oral surgery & medicine
-
[Vascularization in transplantation of gene modified tissue engineered bone for repairing bone defect]
Jianjun Li,Dong Han,Hongbin Sun
Abstract:Objective: To study the vascularization of the composite of bone morphogenetic protein 2 (BMP-2) gene transfected marrow mesenchymal stem cells (MSCs) and biodegradable scaffolds in repairing bone defect. Methods: Adenovirus vector carrying BMP-2 (Ad-BMP-2) gene transfected MSCs and gene modified tissue engineered bone was constructed. The 1.5 cm radial defect models were made on 60 rabbits, which were evenly divided into 4 groups randomly (n= 15, 30 sides). Different materials were used in 4 groups: Ad-BMP-2 transfected MSCs plus PLA/PCL (group A), Ad-Lacz transfected MSCs plus PLA/PCL (group B), MSCs plus PLA/PCL (group C) and only PLA/PCL scaffolds (group D). The X-ray, capillary vessel ink infusion, histology, TEM, VEGF expression and microvascular density counting (MVD) were made 4, 8, and 12 weeks after operation. Results: In group A after 4 weeks, foliated formed bones image was observed in the transplanted bones, new vessels grew into the bones, the pores of scaffolds were filled with cartilage callus, osteoblasts with active function grew around the microvessels, and VEGF expression and the number of microvessels were significantly superior to those of other groups, showing statistically significant difference (P<0.01); after 8 weeks, increasingly more new bones grew in the transplanted bones, microvessels distended and connected with each other, cartilage callus changed into trabecular bones; after 12 weeks, lamellar bone became successive, marrow cavity recanalized, microvessels showed orderly longitudinal arrangement. In groups B and C, the capability of bone formation was weak, the regeneration of blood vessels was slow, after 12 weeks, defects were mostly repaired, microvessels grew among the new trabecular bones. In group D, few new vessels were observed at each time, after 12 weeks, broken ends became hardened, the defected area was filled with fibrous tissue. Conclusion: BMP-2 gene therapy, by up-regulating VEGF expression, indirectly induces vascularization of grafts, promotes the living of seed cells, and thus accelerates new bone formation.
-
Hydrogel Delivery of Mesenchymal Stem Cell–Expressing Bone Morphogenetic Protein-2 Enhances Bone Defect Repair
Hui-Yi Hsiao,Shu-Rui Yang,Eric M. Brey,I-Ming Chu,Ming-Huei Cheng
DOI: https://doi.org/10.1097/gox.0000000000000817
2016-08-01
Plastic and Reconstructive Surgery Global Open
Abstract:BACKGROUND: The application of bone tissue engineering for repairing bone defects has gradually shown some satisfactory progress. One of the concerns raising scientific attention is the poor supply of growth factors. A number of growth factor delivery approaches have been developed for promoting bone formation. However, there is no systematic comparison of those approaches on efficiency of neobone formation. In this study, the approaches using periosteum, direct supply of growth factors, or gene transfection of growth factors were evaluated to determine the osteogenic capacity on the repair of bone defect.METHODS: In total, 42 male 21-week-old Sprague-Dawley rats weighing 250 to 400 g were used as the bone defect model to evaluate the bone repair efficiency. Various tissue engineered constructs of poly(ethylene glycol)-poly(l-lactic acid) (PEG-PLLA) copolymer hydrogel with periosteum, with external supply of bone morphogenetic protein-2 (BMP2), or with BMP2-transfected bone marrow-derived mesenchymal stem cells (BMMSCs) were filled in a 7-mm bone defect region. Animals were euthanized at 3 months, and the hydrogel constructs were harvested. The evaluation with histological staining and radiography analysis were performed for the volume of new bone formation.RESULTS: The PEG-PLLA scaffold with BMMSCs promotes bone regeneration with the addition of periosteum. The group with BMP2-transfected BMMSCs demonstrated the largest volume of new bone among all the testing groups.CONCLUSIONS: Altogether, the results of this study provide the evidence that the combination of PEG-PLLA hydrogels with BMMSCs and sustained delivery of BMP2 resulted in the maximal bone regeneration.
-
Hydrogel-based Delivery of rhBMP-2 Improves Healing of Large Bone Defects Compared With Autograft
Laxminarayanan Krishnan,Lauren B. Priddy,Camden Esancy,Mon-Tzu Alice Li,Hazel Y. Stevens,Xi Jiang,Lisa Tran,David W. Rowe,Robert E. Guldberg
DOI: https://doi.org/10.1007/s11999-015-4312-z
IF: 4.755
2015-09-01
Clinical Orthopaedics and Related Research
Abstract:BackgroundAutologous bone grafting remains the gold standard in the treatment of large bone defects but is limited by tissue availability and donor site morbidity. Recombinant human bone morphogenetic protein-2 (rhBMP-2), delivered with a collagen sponge, is clinically used to treat large bone defects and complications such as delayed healing or nonunion. For the same dose of rhBMP-2, we have shown that a hybrid nanofiber mesh-alginate (NMA-rhBMP-2) delivery system provides longer-term release and increases functional bone regeneration in critically sized rat femoral bone defects compared with a collagen sponge. However, no comparisons of healing efficiencies have been made thus far between this hybrid delivery system and the gold standard of using autograft.Questions/purposesWe compared the efficacy of the NMA-rhBMP-2 hybrid delivery system to morselized autograft and hypothesized that the functional regeneration of large bone defects observed with sustained BMP delivery would be at least comparable to autograft treatment as measured by total bone volume and ex vivo mechanical properties.MethodsBilateral critically sized femoral bone defects in rats were treated with either live autograft or with the NMA-rhBMP-2 hybrid delivery system such that each animal received one treatment per leg. Healing was monitored by radiography and histology at 2, 4, 8, and 12 weeks. Defects were evaluated for bone formation by longitudinal micro-CT scans over 12 weeks (n = 14 per group). The bone volume, bone density, and the total new bone formed beyond 2 weeks within the defect were calculated from micro-CT reconstructions and values compared for the 2-, 4-, 8-, and 12-week scans within and across the two treatment groups. Two animals were used for bone labeling with subcutaneously injected dyes at 4, 8, and 12 weeks followed by histology at 12 weeks to identify incremental new bone formation. Functional recovery was measured by ex vivo biomechanical testing (n = 9 per group). Maximum torque and torsional stiffness calculated from torsion testing of the femurs at 12 weeks were compared between the two groups.ResultsThe NMA-rhBMP-2 hybrid delivery system resulted in greater bone formation and improved biomechanical properties compared with autograft at 12 weeks. Comparing new bone volume within each group, the NMA-rhBMP-2-treated group had higher volume (p < 0.001) at 12 weeks (72.59 ± 18.34 mm3) compared with 8 weeks (54.90 ± 16.14) and 4 weeks (14.22 ± 9.59). The new bone volume was also higher at 8 weeks compared with 4 weeks (p < 0.001). The autograft group showed higher (p < 0.05) new bone volume at 8 weeks (11.19 ± 8.59 mm3) and 12 weeks (14.64 ± 10.36) compared with 4 weeks (5.15 ± 4.90). Between groups, the NMA-rhBMP-2-treated group had higher (p < 0.001) new bone volume than the autograft group at both 8 and 12 weeks. Local mineralized matrix density in the NMA-rhBMP-2-treated group was lower than that of the autograft group at all time points (p < 0.001). Presence of nuclei within the lacunae of the autograft and early appositional bone formation seen in representative histology sections suggested that the bone grafts remained viable and were functionally engrafted within the defect. The bone label distribution from representative sections also revealed more diffuse mineralization in the defect in the NMA-rhBMP-2-treated group, whereas more localized distribution of new mineral was seen at the edges of the graft pieces in the autograft group. The NMA-rhBMP-2-treated group also revealed higher torsional stiffness (0.042 ± 0.019 versus 0.020 ± 0.022 N-m/°; p = 0.037) and higher maximum torque (0.270 ± 0.108 versus 0.125 ± 0.137 N-m; p = 0.024) compared with autograft.ConclusionsThe NMA-rhBMP-2 hybrid delivery system improved bone formation and restoration of biomechanical function of rat segmental bone defects compared with autograft treatment.Clinical RelevanceDelivery systems that allow prolonged availability of BMP may provide an effective clinical alternative to autograft treatment for repair of segmental bone defects. Future studies in a large animal model comparing mixed cortical-trabecular autograft and the NMA-rhBMP-2 hybrid delivery system are the next step toward clinical translation of this approach.
surgery,orthopedics
-
Homogeneous osteogenesis and bone regeneration by demineralized bone matrix loading with collagen-targeting bone morphogenetic protein-2.
Bing Chen,Hang Lin,Jianhua Wang,Yannan Zhao,Bin Wang,Wenxue Zhao,Wenjie Sun,Jianwu Dai
DOI: https://doi.org/10.1016/j.biomaterials.2006.10.013
IF: 14
2007-01-01
Biomaterials
Abstract:Considerable research has been focused on the development of bone morphogenetic protein-2 (BMP-2) delivery system for homologous and efficient bone regeneration. The aim of the present study was to develop a collagen-based targeting bone repair system. A collagen-binding domain (CBD) was added to the N-terminal of native BMP-2 to allow it bind to collagen specifically. We showed that the collagen-binding bone morphogenetic protein-2 (named bone morphogenetic protein2-h, BMP2-h) had maintained the full biological activity as compared to rhBMP2 lacking the CBD. In vitro functional study also demonstrated that collagen matrix could maintain higher bioactivity of BMP2-h than native BMP-2. When demineralized bone matrix (DBM) impregnated with BMP2-h was implanted subcutaneously in rats, homogeneous bone formation was observed. Moreover, in a rabbit mandible defect model, surgical implantation of collagen matrix loaded with BMP2-h exhibited remarkable osteoinductive properties and excellent homogeneous bone formation. Our studies suggested that this novel collagen-based BMP-2 targeting bone repair system induced better bone formation not only in quantity but also in quality. Similar approaches may also be used for the repair of other tissue injuries.
-
Enhancement of BMP-2 and VEGF carried by mineralized collagen for mandibular bone regeneration
Kun Liu,Chun-Xiu Meng,Zhao-Yong Lv,Yu-Jue Zhang,Jun Li,Ke-Yi Li,Feng-Zhen Liu,Bin Zhang,Fu-Zhai Cui
DOI: https://doi.org/10.1093/rb/rbaa022
2020-06-13
Regenerative Biomaterials
Abstract:Abstract Repairing damage in the craniofacial skeleton is challenging. Craniofacial bones require intramembranous ossification to generate tissue-engineered bone grafts via angiogenesis and osteogenesis. Here, we designed a mineralized collagen delivery system for BMP-2 and vascular endothelial growth factor (VEGF) for implantation into animal models of mandibular defects. BMP-2/VEGF were mixed with mineralized collagen which was implanted into the rabbit mandibular. Animals were divided into (i) controls with no growth factors; (ii) BMP-2 alone; or (iii) BMP-2 and VEGF combined. CT and hisomputed tomography and histological staining were performed to assess bone repair. New bone formation was higher in BMP-2 and BMP-2-VEGF groups in which angiogenesis and osteogenesis were enhanced. This highlights the use of mineralized collagen with BMP-2/VEGF as an effective alternative for bone regeneration.
materials science, biomaterials
-
Stepwise verification of bone regeneration using recombinant human bone morphogenetic protein-2 in rat fibula model
Jung-Woo Nam,Hyung-Jun Kim
DOI: https://doi.org/10.5125/jkaoms.2017.43.6.373
Abstract:Objectives: The purpose of this study was to introduce our three experiments on bone morphogenetic protein (BMP) and its carriers performed using the critical sized segmental defect (CSD) model in rat fibula and to investigate development of animal models and carriers for more effective bone regeneration. Materials and methods: For the experiments, 14, 16, and 24 rats with CSDs on both fibulae were used in Experiments 1, 2, and 3, respectively. BMP-2 with absorbable collagen sponge (ACS) (Experiments 1 and 2), autoclaved autogenous bone (AAB) and fibrin glue (FG) (Experiment 3), and xenogenic bone (Experiment 2) were used in the experimental groups. Radiographic and histomorphological evaluations were performed during the follow-up period of each experiment. Results: Significant new bone formation was commonly observed in all experimental groups using BMP-2 compared to control and xenograft (porcine bone) groups. Although there was some difference based on BMP carrier, regenerated bone volume was typically reduced by remodeling after initially forming excessive bone. Conclusion: BMP-2 demonstrates excellent ability for bone regeneration because of its osteoinductivity, but efficacy can be significantly different depending on its delivery system. ACS and FG showed relatively good bone regeneration capacity, satisfying the essential conditions of localization and release-control when used as BMP carriers. AAB could not provide release-control as a BMP carrier, but its space-maintenance role was remarkable. Carriers and scaffolds that can provide sufficient support to the BMP/carrier complex are necessary for large bone defects, and AAB is thought to be able to act as an effective scaffold. The CSD model of rat fibula is simple and useful for initial estimate of bone regeneration by agents including BMPs.
-
Demineralized Bone Matrix Combined Bone Marrow Mesenchymal Stem Cells, Bone Morphogenetic Protein-2 and Transforming Growth Factor-β3 Gene Promoted Pig Cartilage Defect Repair
Xin Wang,Yanlin Li,Rui Han,Chuan He,Guoliang Wang,Jianwei Wang,Jiali Zheng,Mei Pei,Lei Wei
DOI: https://doi.org/10.1371/journal.pone.0116061
IF: 3.7
2014-12-29
PLoS ONE
Abstract:OBJECTIVES: To investigate whether a combination of demineralized bone matrix (DBM) and bone marrow mesenchymal stem cells (BMSCs) infected with adenovirus-mediated- bone morphogenetic protein (Ad-BMP-2) and transforming growth factor-β3 (Ad-TGF-β3) promotes the repair of the full-thickness cartilage lesions in pig model.METHODS: BMSCs isolated from pig were cultured and infected with Ad-BMP-2(B group), Ad-TGF-β3 (T group), Ad-BMP-2 + Ad-TGF-β3(BT group), cells infected with empty Ad served as a negative group(N group), the expression of the BMP-2 and TGF-β3 were confirmed by immunofluorescence, PCR, and ELISA, the expression of SOX-9, type II collagen(COL-2A), aggrecan (ACAN) in each group were evaluated by real-time PCR at 1w, 2w, 3w, respectively. The chondrogenic differentiation of BMSCs was evaluated by type II collagen at 21d with immunohistochemical staining. The third-passage BMSCs infected with Ad-BMP-2 and Ad-TGF-β3 were suspended and cultured with DBM for 6 days to construct a new type of tissue engineering scaffold to repair full-thickness cartilage lesions in the femur condyles of pig knee, the regenerated tissue was evaluated at 1,2 and 3 months after surgery by gross appearance, H&E, safranin O staining and O'driscoll score.RESULTS: Ad-BMP-2 and Ad-TGF-β3 (BT group) infected cells acquired strong type II collagen staining compared with Ad-BMP-2 (B group) and Ad-TGF-β3 (T group) along. The Ad-BMP-2 and Ad-TGF-β3 infected BMSCs adhered and propagated well in DBM and the new type of tissue engineering scaffold produced hyaline cartilage morphology containing a stronger type II collagen and safranin O staining, the O'driscoll score was higher than other groups.CONCLUSIONS: The DBM compound with Ad-BMP-2 and Ad-TGF-β3 infected BMSCs scaffold has a good biocompatibility and could well induce cartilage regeneration to repair the defects of joint cartilage. This technology may be efficiently employed for cartilage lesions repair in vivo.
multidisciplinary sciences
-
Collagen Nanofilm-Coated Partially Deproteinized Bone Combined With Bone Mesenchymal Stem Cells for Rat Femoral Defect Repair by Bone Tissue Engineering
Jiajie Liu,Liang Jin,Qingzhu Zhou,Wenli Huang,Songmei Wang,Xinwei Huang,Xian Zhao
DOI: https://doi.org/10.1097/SAP.0000000000002905
2021-11-01
Abstract:Background: The advantages of good biocompatibility, low degradation and low antigenicity of collagen, and the osteogenic differentiation characteristics of bone mesenchymal stem cells (BMSCs) were used to promote the recovery of bone defects using partially deproteinized bone (PDPB) by bone tissue engineering (BTE). Methods: The BMSCs were identified by examining their potential for osteogenic, lipogenic, and chondrogenic differentiation. The prepared pure PDPB was ground into bone blocks 4 × 2 × 2 mm in size, which were divided into the following groups: PDPB group, PDPB + collagen group, PDPB + collagen + BMSC group, PDPB with a composite collagen nanofilm, and BMSCs injected into the tail vein. At 2, 4, 6, and 8 weeks after surgery, the effects of the implants in the different groups on bone defect repair were continuously and dynamically observed through x-ray examination, gross specimen observation, histological evaluation, and microvascularization detection. Results: Postoperative x-ray examination and gross specimen observation revealed that, after 4 to 8 weeks, the external contour of the graft was gradually weakened, and the transverse comparison showed that the absorption of the graft and fusion of the defect were more obvious in PDPB + collagen + BMSC group than in PDPB group and PDPB + collagen group, and the healing was better (P < 0.05). Hematoxylin and eosin staining of histological sections showed very active proliferation of trabecular hematopoietic cells in groups PDPB + collagen + BMSC and PDPB + collagen. Masson's trichrome staining for evaluation of bone defect repair showed that the mean percent area of collagen fibers was greater in PDPB + collagen + BMSC group than in the PDPB group, with degradation of the scaffold material and the completion of repair. Immunofluorescence staining showed significantly enhanced expression of the vascular marker CD31 in group C (P < 0.05). Conclusions: The proposed hybrid structure of the collagen matrix and PDPB provides an ideal 3-dimensional microenvironment for patient-specific BTE and cell therapy applications. The results showed that collagen appeared to regulate MSC-mediated osteogenesis and increase the migration and invasion of BMSCs. The combination of collagen nanofilm and biological bone transplantation with BMSC transplantation enhanced the proliferation and potential of the BMSCs for bone regeneration, successfully promoting bone repair after implantation at the defect site. This method may provide a new idea for treating clinical bone defects through BTE.