Abstract:In the southern China , the sugarcane is mostly planted on the slopes and hilly areas . Because of the influence caused by the typhoons and monsoons , the sugarcane always render in the state of lodging and bending . Lifting up the sugarcane is the first step of the mechanized harvesting of sugarcane . It is demanded that the harvest mechanic of sugarcane should be adapt to the planting patterns and growth condition , in order to lift up the sugarcane in different lodging status . Currently , the design and the research method on sugarcane lifter was traditional , which usually did static analysis only and did not take the dynamic characteristics into consideration . The propped effect of the existing mechanism is poor and the efficiency is not really high , meanwhile , the sugarcane lifter has problems caused by the unreasonable structure design and operation parameters . In order to solve these problems , the virtual prototype technology will be used to do the virtual experiment on sugarcane lifter .At the same time , the technology will also analyze its key technology , save the cost of physical prototype research and development , and shorten the development cycle of the physical prototype as well . The investigated subject of this paper was mainly the sugarcane lifter with the 60° installation angle and the equivalent pitch spiral . Aimed at the problems of the sugarcane lifting caused by the unreasonable structure design and the operation parameters , the three-dimensional model would be imported into the ADAMS software to do the dynamic simulation . The method of three levels and three factors comprehensive test was used , whose impact factors were sugarcane lifter speed , pitch and the forward speed . Regarding the lifting height as the evaluation index , it intended to find the optimum combination for the virtual experiment of the sugarcane lifter structure and the working parameters , meanwhile , the test data variance would be analyzed by the MATLAB software . Through the analysis of the dynamic simulation of the sugarcane lifter , it was clear that when the time was 0 to 1.5 s , the sugarcane lifter would not get in touch with the sugarcane , and as a result , the centroid vertical displacement was not changed accordingly ;but when the time was 1.5 to 4.5 s , the sugarcane would be lifted by the sugarcane lifter , and the centroid vertical displacement was correspondingly increased gradually . When the time was more than 4.5 s , the fluctuations of the centroid vertical displacement would come out because of the non-existence of the simulation of cutting part.In the combination of the ADAMS virtual comprehensive test , the best operating and structure parameters for the angle of 60° installation sugarcane lifter was that :when the speed of the sugarcane lifter was up to 120 r/min , the pitch of thread was 360 mm , and the forward speed was 350 mm/s , the lifting height of the 60° side lodging sugarcane would reach the maximum 186.9 mm . In addition , the three factors have mutual interactions with each other , and this moment was the strongest time that the forward speed affected the height of the sugarcane lifter , all of which will eventually provide the theory basis for the improvement of sugarcane lifter .

Simulation and Parameter Optimisation of Pickup Device for Full-Feed Peanut Combine Harvester

Design and Modelling of the Full-Feed Peanut Picking Device with Self-Adaptive Adjustable Working Clearance and Feeding Rate

DESIGN AND EXPERIMENT OF A THREE-RIDGE SIX-ROW PEANUT COMBINE HARVESTER BASED ON DEEP INTEGRATION OF AGRICULTURAL MACHINERY AND AGRONOMY

Experiment and Parameter Optimization of an Automatic Row Following System for the Traction Beet Combine Harvester

Optimization Design and Experiment of Ear-Picking and Threshing Devices of Corn Plot Kernel Harvester

Parameter Optimization Experiment of Impact Hybrid Rice Pollination Machine

The optimization design and test of camfull-row-pick-up seeding mechanism

Optimization of parameters for sugarcane lifter based on simulation of virtual prototype

Optimizing the working parameters of pneumatic pollinators based on the kinematic properties of rice panicles

RESEARCH AND SIMULATION ANALYSIS OF PEANUT COMBINED HARVESTER EXCAVATING DEVICE

Optimizing the Working Performance of a Pollination Machine for Hybrid Rice

Simulation of a maize ear picking device with a longitudinal horizontal roller based on hypermesh modeling

Performance Evaluation of a Chopper System for Sugarcane Harvester

Structure Design and Performance Test of Wheat Combine Harvester Based on Numerical Modeling

DESIGN AND EXPERIMENTAL STUDY OF PEANUT PLANTER WITH HIGH-SPEED OPERATION AND CONTROLLABLE SOWING DEPTH

Optimization and experimental study of parameters of root and stem removal device of garlic combine harvester

Simulation and Optimization Experiment: Working Process of a Cleaning Device for Flax Combine Harvester

Design and Testing of an End-Effector for Tomato Picking

Picking patterns evaluation for cherry tomato robotic harvesting end-effector design

Integration of Agricultural Machinery and Agronomy for Mechanised Peanut Production Using the Vine for Animal Feed

Adaptive Variable Parameter Impedance Control for Apple Harvesting Robot Compliant Picking