Ultrasounds Induced Microstructure Transition and Improved Mechanical Property of Directionally Solidified Ternary Cu–Al–Ni Alloy
Y. J. Hu,J. Y. Wang,W. Zhai,B. Wei
DOI: https://doi.org/10.1007/s11663-024-03213-z
2024-01-01
Abstract:Two ultrasonic modes, i.e., continuous and pulsed ultrasounds, were introduced into the directional solidification process of Cu68.3Al27.6Ni4.1 alloy. A columnar-to-equiaxed structure transition occurred to primary β(Cu3Al) phase within continuous ultrasonic field, which was accompanied with a grain size reduction by 7.5 times. Under pulsed ultrasound, β phase maintained the fine columnar structures with a similar grain size. In the former case, numerous β phase nucleation sites formed ahead of solid/liquid (S/L) interface because of the large local undercoolings induced by transient cavitation. Meanwhile, intensive acoustic streaming suppressed the liquid temperature gradient from 120 to 85 K/cm, which interrupted the solute transportation along heat flow direction and resulted in equiaxed microstructures. Under the intermittent ultrasonic action in the latter case, fewer nucleation sites were generated near S/L interface but small columnar β grains were split from the original ones under stable cavitation. Since no steady convection was driven, the liquid temperature gradient of 110 K/cm remained almost constant, making those grains grow into refined columnar structures. Under the action of pulsed ultrasound, the yield strength was enhanced by a factor of 1.5 because of grain refinement strengthening, together with 94 pct shape recovery rate due to columnar grain structures.