Abstract:TiO2 photoanodes have gained significant attention for the removal of organic pollutants through photoelectrocatalytic processes, with the aim of developing a cost-effective and efficient method for improving the degradation of pollutants in surface water. This study investigated the effects of adding titanium nanooxide (Degussa P25) containing 70% anatase and 30% rutile phases on the properties of nanostructured TiO2 photoanodes prepared on glass substrates (indium tin oxide (ITO)) using sol–gel/dip coating techniques The results obtained from ultraviolet–visible transmittance spectroscopy, electrochemical (EC) impedance spectroscopy, photocurrent, and atomic force microscopy analyses revealed that the addition of Degussa P25 improved the electrical conductivity of the TiO2/ITO anode and reduced the optical bandgap from 3.50 to 3.35 eV, while the size of the titanium oxide particles decreased to about 75 nm. The EC impedance spectra measurement confirms that the addition of titanium nanooxide Degussa P25 improved the electrical conductivity for TiO2/ITO anode. The photoelectrocatalysis (PEC) performance of the TiO2 photoanodes was investigated via the degradation of methylene blue (MB) under UVA light irradiation. The AB photoanode (with the addition of Degussa P25) exhibited excellent PEC performance, with 95.9% color removal efficiency and 63% total organic carbon (TOC) removal efficiency, compared to 92% color removal efficiency and 56% TOC removal efficiency for the A photoanode (without the addition of Degussa P25). The kinetic constants (k) were 134 × 10−4, 110 × 10−4 (min−1) for A and AB anodes, respectively, and the degradation of MB followed first-order kinetics for all anodes. The A and AB anodes were compared as electrodes for the degradation of MB using PEC, photocatalysis (PC), and EC technologies. Subsequently, The A and AB anodes were utilized as electrodes to compare the performance of PEC, PC, and EC technologies for the degradation of MB. The results showed that the AB anode exhibited higher efficiency in all PC technologies, with color removal (%) efficiencies of 95.9% (PEC), 33% (PC), and 21% (EC) compared to 92% (PEC), 28% (PC), and 19% (EC) for the A anode. Additionally, the photooxidation process had a 2.1% effect on the degradation of the initial MB concentration.

Study on the Removal of Methylene Blue by Submerged Arc Generated by Titanium and Iron Electrodes

Evaluation of Physical and Chemical Adsorption Using Electrochemical Noise Technique for Methylene Blue on Mild Steel

Microwave enhanced Fenton process for the removal of methylene blue from aqueous solution

THE STUDY ON SOME PARAMETERS AFFECTING THE DEGRADATION OF METHYLENE BLUE IN WATER BY ELECTRO-FENTON USING TI/PBO2 ANODE

Photocatalyst-coated Carbon Microtube Electrodes: Preparation and Characterization of Their Properties and Photocatalytic Degradation of Methylene Blue.

Degradation of Methylene Blue Via Dielectric Barrier Discharge Plasma Treatment

Heterogeneous Fenton-like Degradation of Methylene Blue (MB) by Magnetic Nanoparticles Fe3O4@TiO2 in Neutral Condition

Multivariate optimization of methylene blue dye degradation using electro-Fenton process with self-doped TiO2 nanotube anode

Photocatalytic Activity of Zero-Valent Iron Nanoparticles Highly Dispersed on Porous Carbon Materials

Degradation of Methylene Blue by Dielectric Barrier Discharge Plasma Coupled with Activated Carbon Supported on Polyurethane Foam

Fabrication of Fe2O3/TiO2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Photocatalytic Degradation of Methylene Blue in TiO2 Aqueous Suspensions Using Microwave Powered Electrodeless Discharge Lamps.

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Efficient catalytic degradation of methylene blue by a novel Fe3+-TiO2@CGS three-dimensional photoelectric system

Study on the Enhancement of Fenton-like Degradation of Methylene Blue by Foam Glass-Supported Α-Fe2o3/s in a Wide Initial Ph Range

Electro-catalytic Degradation of Methylene Blue Wastewater Assisted by Fe2O3-modified Kaolin

Iron/titanium oxide-biochar (Fe2TiO5/BC): A versatile adsorbent/photocatalyst for aqueous Cr(VI), Pb2+, F- and methylene blue

Degradation of methylene blue by an E-Fenton process coupled with peroxymonosulfate via free radical and non-radical oxidation pathways

Improving the Photo Electro Catalytic Degradation of Methylene Blue by Modified TiO2/ITO Photo Anodes

Ag2O and NiO Decorated CuFe2O4 with Enhanced Photocatalytic Performance to Improve the Degradation Efficiency of Methylene Blue

photocatalytic degradation of TiO2 via incorporating Ti3C2 MXene for methylene blue removal from water