Abstract:With the rapid development of 5G technology, acoustic wave filters with large bandwidths are urgently required to deal with the explosive increase in data traffic. Recently, there is extensive attention paid to shear-horizontal (SH) surface acoustic wave (SAW) resonators based on lithium niobate (LiNbO3) substrates, thanks to its large effective coupling coefficient (k(eff)(2)). However, because of the bulk acoustic wave (BAW) energy radiation into the LiNbO3 substrate, it is very challenging to obtain a high quality factor (Q) for SH-SAW resonators. In this study, a 30 degrees YX-LiNbO3/SiO2/Si SAW resonator with the SH mode is proposed to achieve a large coupling and a high Q simultaneously. By bonding a LiNbO3 thin film onto a thermally oxidized Si(100) substrate, the velocity mismatch between the piezoelectric layer and the SiO2/Si substrate could significantly reduce the BAW energy leakage. Finite element method simulation is employed to optimize the cut angle of the LiNbO3 film and the thickness of each layer. The fabricated SH-SAW resonators with a resonant frequency of 924 MHz yield a k(eff)(2) of 24.8% and a maximum of Bode-Q (Bode-Q(max)) of 1107. In comparison with the previously reported same-type SAW resonators, a higher Bode-Q(max) is demonstrated in this work when their k(eff)(2) is larger than 20%, providing a potential solution to enable wideband tunable filters in the 5G communication system. Published under an exclusive license by AIP Publishing.

Wide Band BAW Filter Based on Single-Crystalline LiNbO₃ Thin Film with Insulating Bragg Reflector

Fabrication of Single Crystalline LiNbO3 Thin Films for Wideband Bulk Acoustic Wave Filters

Wideband and Low-Loss Surface Acoustic Wave Filter Based on 15° YX-LiNbO₃/SiO₂/Si Structure

Thin-Film Lithium Niobate Acoustic Filter at 23.5 GHz with 2.38 dB IL and 18.2% FBW

High-performance SH-SAW resonator using optimized 30 degrees YX-LiNbO3/SiO2/Si

High-performance SH-SAW resonator using optimized 30° YX-LiNbO 3 /SiO 2 /Si

BAW Resonator with an Optimized SiO<sub>2</sub>/Ta<sub>2</sub>O<sub>5</sub> Reflector for 5G Applications

Ultrathin Single‐crystalline LiNbO 3 Film Bulk Acoustic Resonator for 5G Communication

High-Performance Surface Acoustic Wave Devices Using LiNbO 3 /SiO 2 /SiC Multilayered Substrates

Heterogeneous Integration of 42°YX LiNbO3/SiO2/Quartz for Wideband and Spurious-Free SAW Resonators

The Thin Film Bulk Acoustic Wave Resonator Based On Single-Crystalline 43 Degrees Y-Cut Lithium Niobate Thin Films

High-Performance Surface Acoustic Wave Devices Using LiNbO3/SiO2/SiC Multilayered Substrates

Transferred Thin Film Lithium Niobate as Millimeter Wave Acoustic Filter Platforms

Wideband Surface Acoustic Wave Filter at 3.7 GHz With Spurious Mode Mitigation

Hybrid Integration of BAW Resonators with an On-Chip Inductor to Improve the Stopband Rejection of the N78 Band Filter

Simulation of Wide Band BAW Filter for N78 Application

Lithium niobate single crystal thin film resonator with benzocyclobutene as a reflective layer

Large Coupling and Spurious-Free SH 0 Plate Acoustic Wave Resonators Using LiNbO 3 Thin Film

Near 5-GHz Longitudinal Leaky Surface Acoustic Wave Devices on LiNbO$_{3}$/SiC Substrates

38.7 GHz Thin Film Lithium Niobate Acoustic Filter

Single Crystal Bulk Acoustic Resonator for 5 GHz and High-Power Applications