Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

An Efficient FCS-MPC Based on Discrete Space Vector Modulation for PMSMs

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM

A Discrete Space Vector Model Predictive Control Strategy for Permanent Magnet Synchronous Motors

A FCS-MPTC Method Based on Discrete Space Vector Modulation with Reduced Computation Burden for PMSM

Finite Control Set Model Predictive Torque Control With Reduced Computation Burden for PMSM Based on Discrete Space Vector Modulation

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

An Efficient Model Predictive Control Strategy for Five-Phase Permanent Magnet Synchronous Motor Based on Discrete Control Set

A Novel Model Predictive Current Control with Reduced Computational Burden Based on Discrete Space Vector Modulation for PMSM Drives

FCS Model Predictive Current Control Method for EV PMSMs at Low Control Frequency Considering Flux Mismatch

Finite Control Set Model Predictive Control for PMSM Based on Imposed Weighting Factor

Finite-control-set Model-Free Predictive Current Control Strategy Based on Extended Control Set of PMSM

Accurate FCS Model Predictive Current Control Technique for Surface-Mounted PMSMs at Low Control Frequency

Integrated Virtual Voltage Vectors and Duty Cycle Control to Minimize the Current Ripples in Finite Control Set Model Predictive Control for Permanent Magnet Synchronous Motor Drives.

Improved Finite-Control-Set Model Predictive Control with Virtual Vectors for PMSHM Drives

Single-Loop SVPWM Modulate Strategy for Permanent Magnet Synchronous Motor Control System

Research on Low Computational Model Predictive Control Method for FP-PMSM

A Modified Modulated Model Predictive Control for PMSM in Over-Modulation Region

A new model predictive current control strategy for PMSM based on extended control set and dynamic cost function

Fast Two‐vector‐based Model‐free Predictive Current Control of Permanent Magnet Synchronous Motor

Finite-Control-Set Model Predictive Control of Permanent Magnet Synchronous Motor Drive Systems—An Overview