Abstract:The slow cook-off test is widely used for analyzing the safety of propellants under accidental thermal stimulation. To examine the influence of the pre-ignition technology of a composite propellant on thermal safety and combustion characteristics, a quantitative evaluation experiment of slow cook-off reaction intensity of a typical composite propellant charge was designed and executed, considering hydroxyl-terminated polybutadiene (HTPB) and hydroxyl‐terminated block copolyether (HTPE) propellants containing ammonium perchlorate (AP) and aluminum (Al). The experimental method for quantitative evaluation of the slow cook-off reaction intensity is highly essential to investigate the safety of ammunition. The influence of pre-ignition on reaction intensity was analyzed at different temperatures, the combustion behavior of the heated propellant was studied using a closed bomb experiment, and the influence of pre-ignition on combustion evolution was analyzed. Finally, the process was characterized by theoretical modeling. The results show that the slider speed was 169.3 m/s when the HTPB/AP/Al propellant was ignited at 234 °C. The slider speed was reduced to 43.4 m/s and 61.8 m/s by pre-ignition at 120 °C and 214 °C, respectively. When the spontaneous ignition temperature of HTPE/AP/Al propellant was 212 °C, the slider speed was 110.5 m/s. Pre-ignition at 120 °C and 192 °C reduced the slider speed to 39.4 m/s and 43.7 m/s, respectively. Pre-ignition can effectively reduce the reaction intensity. Under the same conditions, the reaction strength of HTPE/AP/Al propellant is marginally lower than that of HTPB/AP/Al propellant. In the slow heating process before ignition, with the increase in ignition temperature, when HTPB/AP/Al propellant was pre-ignition at 120 °C and 214 °C, the pressurization time was 9.8 ms and 6.4 ms, respectively, while before ignition, the pressurization time decreased to 5.5 ms. At 120 °C and 192 °C, the pressurization time of HTPE/AP/Al propellant was 50.9 ms and 36.6 ms, respectively, while before ignition, the pressurization time decreased to 26.9 ms. The reduction in ignition temperature decreased the pressure growth rate of propellant during combustion and reduced the pressurization time. A calculation model of the propellant combustion process was established to characterize the growth process of the combustion pressure at different ignition temperatures. This model can effectively predict the combustion evolution of composite propellants after the slow cook-off ignition and aid in ensuring propellant safety.

Unique Thermal and Combustion Behaviors of Composite Propellants Containing a High-Energy Insensitive Nitropyrimidine Derivative

Preparation, High-Density Spherical, and Low Sensitivity of RDX/NC/PMMA Composite Particles

Combustion performance modulation and agglomeration inhibition of HTPB propellants by fine Al/oxidizers integration

Multi-scale modified nitramine crystals with conjugated structure intercalation and thin-layer catalyst coating for well-controlled energy release rate

Effects of Sn-containing intermetallic compounds on the thermal decomposition and ignition properties of RDX and TKX-50

Precise Regulation of Combustion Characteristics of High-Energy Composite Propellants by Incorporation of CL-20 Crystals Intercalated with Energetic Burn Rate Modifiers

Thermal decomposition and combustion behavior of solid propellant containing Si-based composites

Effects of particle size and content of RDX on burning stability of RDX-based propellants

Burning Characteristics in a Wide Range of Pressure and Thermal Decomposition of AP/PBT Solid Propellants

Combustion and agglomeration characteristics of aluminized propellants containing Al/CuO/PVDF metastable intermolecular composites: A highly adjustable functional catalyst

Bio‐inspired Synthesis of Energetic Microcapsules Core‐Shell Structured with Improved Thermal Stability and Reduced Sensitivity via In Situ Polymerization for Application Potential in Propellants

3D Electron-Rich ZIF-67 Coordination Compounds Based on 2-Methylimidazole: Synthesis, Characterization and Effect on Thermal Decomposition of RDX, HMX, CL-20, DAP-4 and AP

Influence of pre-ignition technology on combustion and explosion characteristics of composite propellants

Effect of amine-based burning rate suppressants on the HTPB propellants: Thermal decomposition and combustion characteristics

Combustion behavior of AP/HTPB/Al composite propellant containing hydroborate iron compound

Pb Single Atoms Enable Unprecedented Catalytic Behavior for the Combustion of Energetic Materials

Improving flowability of the propellant prepared by solventless extrusion process by integration dendrimer and investigation on its thermal, sensitivity, and combustion features

Thermal Behavior and Safety of Fine TAGzT and Its CMDB Propellants Including Characterization and Energy Performance Evaluation

Assessment of the Sensitivity to Detonation of the Gaseous Pyrolytic Products Formed During the Thermal Decomposition of Ammonium Dinitramide and Its Related Ionic Liquids

Thermal decomposition and combustion characteristics of Al/AP/HTPB propellant

Combustion of ammonium dinitramide based solid propellant with PBT as energetic binders