Abstract:Heterogeneous electrocatalytic reactions only occur at the interface between the electrocatalyst and reactant. Therefore, the active sites are only necessary to be distributed on the surface of the electrocatalyst. Based on this motivation, here, we demonstrate a systematic study on surface tuning for a carbon-based electrocatalyst from metal-free (with the heteroatoms N and S, NS/C) to metal-containing surfaces (with Co, N, and S, CoNS/C). The CoNS/C electrocatalyst was obtained by pyrolyzing the Co precoordinated and p-toluenesulfonate-doped polypyrrole (PPy). It was found that the coordination of Co on the PPy ring tuned the final carbon electrocatalyst into a catalyst with a CoNx moiety-rich surface. In addition, the as-synthesized CoNS/C was determined to have a very high loading of cobalt up to 2.02 wt %. The pyrolysis of the cobalt-containing precursor tends to proceed toward a characteristic of a higher sp2 carbon content, a higher surface area, and more nitrogen as well as active nitrogen sites than its metal-free counterpart. The most distinguished feature for such a catalyst is that the truly most active component is only distributed on the surface, in contrast with that of the conventional metal–N-based catalyst present throughout the bulky structure. Especially, the electrocatalytic activity toward oxygen evolution reaction (OER) has been investigated experimentally and theoretically. The results showed that the OER performance of the carbon-based electrocatalyst was remarkably boosted after the introduction of Co with an overpotential decrease from 678 to 345 mV at 10 mA cm–2. Furthermore, CoNS/C displayed an excellent durability upon a long-term measurement. The apparent activation energy measurements revealed that the metal-rich surface contributed to overcome the energy barrier for OER. In addition, density functional theory calculations have been conducted to explain the correlated OER mechanism. This study is expected to provide an effective strategy for the design and the synthesis of highly active metal–nitrogen-type electrocatalysts with a high metal loading for various electrocatalytic reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17599?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17599</a>.Raman spectra and XRD patterns of NS/C and CoNS/C; SEM and HR-TEM images of NS/C; XPS survey spectrum of CoNS/C; TGA curves of CoNS/C and etched CoNS/C; calculated mass content of Co according to TGA; survey XPS spectrum and high-resolution C 1s, N 1s, and S 2p of NS/C; N2 sorption isotherms and BJH desorption pore size distributions of NS/C and CoNS/C; RRDE measurement of the Co–PPy electrode toward OER; LSV curves of CoNS/C electrocatalysts synthesized with various temperatures toward OER; content of N determined using XPS spectra in CoNS/C with different pyrolysis temperatures; fitted parameters for EIS results; LSV curves of CoNS/C and etched CoNS/C toward OER; summary of the overpotentials of the various electrodes at 10 mA cm–2; temperature-dependent LSV curves of the corresponding fittings of activation energy of NS/C, CoNS/C, and RuO2 toward OER; ADT tests of NS/C toward OER; SEM image of CoNS/C and NS/C after the ADT test; survey XPS spectrum and high-resolution N 1s and Co 2p of CoNS/C after the test; DFT calculations; and summary of the OER activity comparison for recent various advanced non-precious-metal-based electrocatalysts (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17599/suppl_file/am0c17599_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improved OH adsorption and effective oxygen evolution reaction on carbon-capsulated Co 0.1 Ni 0.9 O@C/CP electrode

Three-Dimensional Ni Foam-Supported CoO Nanoparticles/N-Doped Carbon Multilayer Nanocomposite Electrode for Oxygen Evolution

Self-Supported Low-Crystallinity Cofe Layered Double Hydroxide Nanospheres on Monolayer Ti3c2 Electrode for Oxygen Evolution Reaction

Defective Layered NiFe Double Hydroxides Anchored on Self-Supported CoNi-nitrogen Doped Carbon Nanotube Composite As Advanced Electrocatalyst for Oxygen Evolution Reaction

Strong Co–O Hybrid Polyporous CoOx with High Intrinsic Activity for Outstanding Alkaline OER Performance

An efficient and stable MnCo@NiS catalyst for oxygen evolution reaction constructed by a step-by-step electrodeposition way

High-Valence-State NiO/Co3O4 Nanoparticles on Nitrogen-Doped Carbon for Oxygen Evolution at Low Overpotential

Enhanced Interfacial Interactions Between Ni2Fe (hydroxy)oxides and Oxygen-Modified Carbon Substrate for Efficient Oxygen Evolution Reaction

Nickel-doped Co4N Nanowire Bundles As Efficient Electrocatalysts for Oxygen Evolution Reaction

FeCoNi molybdenum-based oxides for efficient electrocatalytic oxygen evolution reaction

Engineered oxidation states in NiCo2O4@CeO2 nanourchin architectures with abundant oxygen vacancies for enhanced oxygen evolution reaction performance

Facile synthesis of Co–Fe layered double hydroxide nanosheets wrapped on Ni-doped nanoporous carbon nanorods for oxygen evolution reaction

Surface Tuning to Promote the Electrocatalysis for Oxygen Evolution Reaction: From Metal-Free to Cobalt-Based Carbon Electrocatalysts

Enhancing Oxygen Evolution Reaction Performance: Electrochemical Activation of the Biphasic CoNi/Zn(Fe,Al,Cr) 2 O 4 via Controlled Aluminum Leaching Facilitated Surface Reconstruction

Bicontinuous Nanoporous Nitrogen/Carbon-Codoped FeCoNiMg Alloy as a High-Performance Electrode for the Oxygen Evolution Reaction

Core–Shell Co‐CoxP Nanoparticle‐Embedded N‐Doped Carbon Nanowhiskers Hollow Sphere for Efficient Oxygen Evolution Electrocatalysis

Fabrication of NiCo@Ni3S2/Nickel foam electrocatalyst with ultrathin NiCo layered double hydroxide film wrapping Ni3S2 nanoarrays for efficient oxygen evolution reaction

Ni–Fe Nanosheets Anchored on Porous Cobalt Substrate towards Oxygen Evolution Reaction

Pseudocapacitive Ni-Co-Fe Hydroxides/N-Doped Carbon Nanoplates-Based Electrocatalyst for Efficient Oxygen Evolution.

Surface Sulfurization of NiCo-Layered Double Hydroxide Nanosheets Enable Superior and Durable Oxygen Evolution Electrocatalysis

Enhancing oxygen evolution reaction of CoP nanosheets via interfacial engineering with CoFe-LDH nanosheets