Design of a Ka-Band Traveling Wave Tube Using Low Turn-On Field Emission Electron Source Made by Carbon Nanotubes

Ruirui Jiang,Jianlong Liu,Peiyang Zhao,Kaiqiang Yang,Jing Zhao,Tao Chen,Yubin Gong,Baoqing Zeng
DOI: https://doi.org/10.1109/tps.2021.3134376
IF: 1.368
2021-01-01
IEEE Transactions on Plasma Science
Abstract:This article designed a Ka-band traveling wave tube (TWT) with the single wall carbon nanotubes (SWCNTs) field emission cathode electron gun. The designed cold-cathode TWT was miniaturized and could instantly startup at room temperature because of the field emission cathode. First, SWCNT cathode was made by imprinting. The field emission measurement results showed that its turn-on field was as low as 0.57 MV/m, and the maximum emission current was about 10 mA. Then, a grid-controlled electron gun with planar field emission cathode was simulated based on the experiment results, which had low operation voltage of the electron gun and would prevent their grid mesh from burning. The optimized electron beam waist radius of the electron gun was 0.15 mm with the structure of the focusing magnetic field. According to experiment and simulation results, we preliminarily designed a Ka-band helix TWT with an average output power of 8.6 W and a gain of 24.6 dB at 28 GHz. The designed miniaturized TWT with a low-operation-voltage field emission cathode electron gun is expected to be used in low-power applications including 5G communication.
What problem does this paper attempt to address?