Tailoring Escherichia Coli Chemotactic Sensing Towards Cadmium by Computational Redesign of Ribose-Binding Protein

Hengyi Li,Changsheng Zhang,Xi Chen,Hantian You,Luhua Lai

DOI: https://doi.org/10.1128/msystems.01084-21

2022-01-01

mSystems

Abstract:Cadmium pollution is one of the major environmental problems due to excessive release and accumulation. New technologies that can auto-detect cadmium ions with good biocompatibility are in urgent need.

What problem does this paper attempt to address?

New progress in coumarin-based fluorescence sensor for metal ions

Jieming SHU,Yunling GAO,Kejian YAO,Ying HU

DOI: https://doi.org/10.3969/j.issn.1000-6613.2014.12.004

2014-01-01

Abstract:Metal ions have a significant impact on the environment and the growth and development of organism,therefore,the recognition and detection of metal ions in the environment and organism is gaining widespread attention. Among different analytical methods,fluorescence analysis has the advantages of high sensitivity,good selectivity,real-time and in situ detection,etc.,which is a good tool to achieve the recognition and detection of metal ions in the environment and organism. This paper is aimed to review the coumarin-based fluorescent sensors for the recognition and detection of heavy metal ions (Hg2+、Pb2+、Cd2+、Ni2+、Ag+),biologically important transition metal ions (Cu2+、Zn2+、Fe3+) and their applications in recent five years,focusing on the design and synthesis of sensors, recognition mechanism,sensing characteristics and applications. With the higher requirement for metal ions detection , the design of coumarin-based fluorescent sensors will be developed for better performance with higher sensitivity,selectivity and stronger anti-interference in the future. In addition, applications of coumarin-based fluorescent sensors in biological detection are expected to be further developed.
Optimizing Cadmium and Mercury Specificity of CadR-based E. Coli Biosensors by Redesign of CadR

Hu-Chun Tao,Zhi-Wen Peng,Peng-Song Li,Tai-An Yu,Jie Su

DOI: https://doi.org/10.1007/s10529-013-1216-4

2013-01-01

Biotechnology Letters

Abstract:The metalloprotein, CadR, was redesigned to optimize cadmium and mercury specificity of CadR-based E. coli biosensors. By truncating 10 and 21 amino acids from the C- terminal extension of CadR, CadR-TC10 and CadR-TC21 were obtained, respectively. The genes cadR , cadR - TC10 and cadR - TC21 were used as sensing elements to construct green fluorescent protein based E.coli biosensors. Induction at 30 °C for 4 h in supplemented M9 medium was the optimized condition for the biosensor. Compared with CadR-based biosensor, there was a clear decline in induction coefficient for CadR-TC21-based biosensor (decreased by 86 % in Zn(II), 44 % in Hg(II), and only 37 % in Cd(II)). While in CadR-TC10-based biosensor, the induction coefficient decreased by 95 % in Zn(II), 70 % in Hg(II), and 67 % in Cd(II). Improved performances of CadR mutants based E. coli biosensors indicated that truncating C- terminal extension of CadR could improve the specificity.
Signal Enhancement of Electrochemical DNA Biosensors for the Detection of Trace Heavy Metals

Jiadi Sun,Ying Gan,Tao Liang,Shuqi Zhou,Xinyi Wang,Hao Wan,Ping Wang

DOI: https://doi.org/10.1016/j.coelec.2019.04.007

IF: 8.5

2019-01-01

Current Opinion in Electrochemistry

Abstract:Heavy-metal pollution has attracted intensive attention from the public because of the severe threats of heavy metals to the ecosystem and human health. Ultralow concentration of heavy metals in aquatic environment leads to the urgent needs of sensitive approaches for heavy-metal detection. Electrochemical DNA biosensors present outstanding superiority in convenience, selectivity, and sensitivity compared with conventional methods. To achieve the ultralow detection limit, efforts have been made to implement signal enhancement strategies to develop electrochemical DNA biosensors with enhanced sensing performance. This review focuses on the recent progress in signal enhancement strategies applied to electrochemical DNA biosensors for heavy-metal-ion detection including nicking enzyme-assisted amplification, the utilization of core-shell nanoparticles, and nanocomposites modification.
Development of CadR-based cadmium whole cell biosensor for visual detection of environmental Cd2

Tianyi Zhang,KaiLi Zhu,Xia Zhang,Xin Yu,Liang Shen,Defeng Gao,Yiwen Chen,Qinghua Wang,Shaopeng Chen,Lingzhi Bao

DOI: https://doi.org/10.1016/j.aca.2024.343299

2024-11-22

Abstract:Background: As a threat to human health and public health, cadmium (Cd) pollution has received widespread social concern. Our previously constructed CadR-based bacterial whole cell biosensor (WCB) epCadR5 showed high sensitivity and specificity in cadmium detection. However, the application of the sensor is still hindered by the need for laboratory equipment to read the fluorescence signal output. In this study, we aimed to optimizing the sensor to make it available for visual detection of environmental cadmium and simplify the detection process to advance practical application of the sensor. Results: By replacing the constitutive promoter with J110, the fluorescence signal output of the sensor was significantly increased and the fluorescence leakage was decreased. In addition, the fluorescence signal output of green fluorescence protein (GFP) was enhanced by the addition of a 5' untranslated region (5'-UTR) mlcR10. The fluorescence signal output of the WCB is sufficiently robust to be visible and distinguishable to the naked eye, which is of paramount importance for visual detection. The sensor readout can be conveniently recorded by mobile phone camera and quantified. For ease of on-site application, the WCB's visual detection procedures and conditions were further optimized and simplified. The WCB demonstrated good linearity and detection limit (1.81 μg/L) for visual detection of Cd2+ without the assistance of bulky laboratory equipment. For the detection of real environmental samples, the WCB visual detection results were close to those of WCB-flow cytometry (FACS) and graphite furnace atomic absorption spectroscopy (GFAAS). Significance: In this work, we developed an easy-to-use, on-site and visual detection biosensor for monitoring environmental Cd2+. It will advance the utilization of cadmium WCBs in practical settings. The optimization and simplification strategy in the study also provide new insights into the visualization of other bacterial biosensors, and will advance the practical application of WCBs.
Detection of Bioavailable Cadmium by Double-Color Fluorescence Based on a Dual-Sensing Bioreporter System

Chang-ye Hui,Yan Guo,Jian Wu,Lisa Liu,Xue-qin Yang,Xiang Guo,Ying Xie,Juan Yi

DOI: https://doi.org/10.3389/fmicb.2021.696195

IF: 5.2

2021-09-16

Frontiers in Microbiology

Abstract:Cadmium (Cd) is carcinogenic to humans and can accumulate in the liver, kidneys, and bones. There is widespread presence of cadmium in the environment as a consequence of anthropogenic activities. It is important to detect cadmium in the environment to prevent further exposure to humans. Previous whole-cell biosensor designs were focused on single-sensing constructs but have had difficulty in distinguishing cadmium from other metal ions such as lead (Pb) and mercury (Hg). We developed a dual-sensing bacterial bioreporter system to detect bioavailable cadmium by employing CadC and CadR as separate metal sensory elements and eGFP and mCherry as fluorescent reporters in one genetic construct. The capability of this dual-sensing biosensor was proved to simultaneously detect bioavailable cadmium and its toxic effects using two sets of sensing systems while still maintaining similar specificity and sensitivity of respective signal-sensing biosensors. The productions of double-color fluorescence were directly proportional to the exposure concentration of cadmium, thereby serving as an effective quantitative biosensor to detect bioavailable cadmium. This novel dual-sensing biosensor was then validated to respond to Cd(II) spiked in environmental water samples. This is the first report of the development of a novel dual-sensing, whole-cell biosensor for simultaneous detection of bioavailable cadmium. The application of two biosensing modules provides versatile biosensing signals and improved performance that can make a significant impact on monitoring high concentration of bioavailable Cd(II) in environmental water to reduce human exposure to the harmful effects of cadmium.

microbiology
A tailored indigoidine-based whole-cell biosensor for detecting toxic cadmium in environmental water samples

Chang-ye Hui,Yan Guo,Chao-xian Gao,Han Li,Yi-ran Lin,Jian-pei Yun,Yu-ting Chen,Juan Yi

DOI: https://doi.org/10.1016/j.eti.2022.102511

2022-08-01

Abstract:Regulated expression of resistance genes is essential for the survival and adaptation of microbial communities under stress-inducing conditions, such as exposure to environmental contamination. By simulating environmental microorganisms sensing heavy metal pollutants, numerous whole-cell biosensors have been developed in the past two decades. However, most of biosensing signals are excessively dependent on instrumental determination, which remains a huge challenge. Here, we developed a visual whole-cell biosensor, which was assembled by fusing CadR-based Cd(II) sensory element with a biosynthetic gene cluster for indigoidine. The basal production of indigoidine was very low, which could contribute to the reduced detection background. The whole-cell biosensor responded strongly to Cd(II), but responded weakly to Zn(II), Pb(II), and Hg(II). The limit of detection was 0.049 μM upon Cd(II) exposure in the early exponential phase, and was further decreased to be 0.024 μM upon Cd(II) exposure in the lag phase. Bioavailable Cd(II) could be quantified using a nonlinear regression within a range of 6.25 to 200 μM. By integrating indigoidine and mCherry into one biosensing construct, a versatile dual-signal output biosensor conductive to diversified detection was successfully developed and validated. The Cd(II) biosensing capability of indigoidine-based biosensor was verified in detecting environmental water samples. A high-throughput method based on a 96-well microplate was validated in quantitative detection. Naked-eye recognizable blue in the culture system was convenient for approximate quantification. Its ease-of-use, low cost, and minimal-equipment requirement make it a potential field-deployable biosensor for environmental cadmium pollution surveying.

environmental sciences,engineering, environmental,biotechnology & applied microbiology
Selective cadmium regulation mediated by a cooperative binding mechanism in CadR.

Xichun Liu,Qingyuan Hu,Jinmei Yang,Shanqing Huang,Tianbiao Wei,Weizhong Chen,Yafeng He,Dan Wang,Zhijun Liu,Kang Wang,Jianhua Gan,Hao Chen

DOI: https://doi.org/10.1073/pnas.1908610116

2019-01-01

Abstract:Detoxification of the highly toxic cadmium element is essential for the survival of living organisms. Pseudomonas putida CadR, a MerR family transcriptional regulator, has been reported to exhibit an ultraspecific response to the cadmium ion. Our crystallographic and spectroscopic studies reveal that the extra cadmium selectivity of CadR is mediated by the unexpected cooperation of thiolate-rich site I and histidine-rich site II. Cadmium binding in site I mediates the reorientation of protein domains and facilitates the assembly of site II. Subsequently, site II bridge-links 2 DNA binding domains through ligands His140/His145 in the C-terminal histidine-rich tail. With dynamic transit between 2 conformational states, this bridge could stabilize the regulator into an optimal conformation that is critical for enhancing the transcriptional activity of the cadmium detoxification system. Our results provide dynamic insight into how nature utilizes the unique cooperative binding mechanism in multisite proteins to recognize cadmium ions specifically.
Integrating CRISPR/Cas12a with strand displacement amplification for the ultrasensitive aptasensing of cadmium(II)

Xiaochen Ma,Tiying Suo,Furong Zhao,Zhaoyang Shang,Yue Chen,Pei Wang,Bingzhi Li

DOI: https://doi.org/10.1007/s00216-023-04650-6

Abstract:Cadmium ion (Cd(II)) is a pernicious environmental pollutant that has been shown to contaminate agricultural lands, accumulate through the food chain, and seriously threaten human health. At present, Cd(II) monitoring is dependent on centralized instruments, necessitating the development of rapid and on-site detection platforms. Against this backdrop, the present study reports on the development of a fluorometric aptasensor designed to target Cd(II), which is achieved through the integration of strand displacement amplification (SDA) and CRISPR/Cas12a. In the absence of Cd(II), the aptamer initiates SDA, resulting in the generation of a profusion of ssDNA that activates Cas12a, leading to a substantial increase in fluorescence output. Conversely, the presence of Cd(II) curtails the SDA efficiency, culminating in a significant reduction in fluorescence output. The proposed approach has been demonstrated to enable the selective detection of Cd(II) at concentrations of 60 pM, with the performance of the aptasensor validated in real water and rice samples. The proposed platform based on aptamer-target interaction holds immense promise as a signal-amplified and precise method for the detection of Cd(II) and has the potential to transform current hazard detection practices in food samples.
Discovery Of Novel Chemoeffectors And Rational Design Of Escherichia Coli Chemoreceptor Specificity

Shuangyu Bi,Daqi Yu,Guangwei Si,Chunxiong Luo,Tongqing Li,Qi Ouyang,Vladimir Jakovljevic,Victor Sourjik,Yuhai Tu,Luhua Lai

DOI: https://doi.org/10.1073/pnas.1306811110

2013-01-01

Abstract:Bacterial chemoreceptors mediate chemotactic responses to diverse stimuli. Here, by using an integrated in silico, in vitro, and in vivo approach, we screened a large compound library and found eight novel chemoeffectors for the Escherichia coli chemoreceptor Tar. Six of the eight new Tar binding compounds induce attractant responses, and two of them function as antagonists that can bind Tar without inducing downstream signaling. Comparison between the antagonist and attractant binding patterns suggests that the key interactions for chemotaxis signaling are mediated by the hydrogen bonds formed between a donor group in the attractant and the main-chain carbonyls (Y149 and/or Q152) on the alpha 4 helix of Tar. This molecular insight for signaling is verified by converting an antagonist to an attractant when introducing an N-H group into the antagonist to restore the hydrogen bond. Similar signal triggering effect by an O-H group is also confirmed. Our study suggests that the Tar chemoeffector binding pocket may be separated into two functional regions: region I mainly contributes to binding and region II contributes to both binding and signaling. This scenario of binding and signaling suggests that Tar may be rationally designed to respond to a nonnative ligand by altering key residues in region I to strengthen binding with the novel ligand while maintaining the key interactions in region II for signaling. Following this strategy, we have successfully redesigned Tar to respond to L-arginine, a basic amino acid that does not have chemotactic effect for WT Tar, by two site-specific mutations (R69'E and R73'E).
An ultrasensitive Cd 2+ detection biosensor based on DNAzyme and CRISPR/Cas12a coupled with hybridization chain reaction

Pengda Liang,Bei Lv,Ke Chen,Wenrui Qiao,Dawei Li

DOI: https://doi.org/10.1016/j.aca.2023.341950

IF: 6.911

2023-10-25

Analytica Chimica Acta

Abstract:The detection of cadmium is essential because it poses a significant threat to human health and the environment. Recent advancements in biosensors that detect nonnucleic-acid targets using CRISPR/Cas12a in combination with aptamers or DNAzymes show promising performance. Herein, we integrated DNAzyme, hybridization chain reaction (HCR) and CRISPR/Cas12a into a single biosensor for the first time and realized the ultrasensitive detection of Cd 2+ . A single phosphorothioate ribonucleobase (rA)-containing oligonucleotide (PS substrate) and a Cd 2+ -specific DNAzyme (Cdzyme) are used for Cd 2 + recognition, releasing short single-stranded DNA. Then, the HCR is triggered by the cleavage products for signal transduction and amplification. Next, the trans -cleavage activity of Cas12a is activated due to the presence of crRNA complementary strands and PAM sites in the HCR products. As a result, FQ reporters are cleaved, and the fluorescence values can be easily read using a fluorometer, allowing Cd 2 + quantification by measuring the fluorescent signal. The Cd 2 + detection biosensor is ultrasensitive with a detection limit of 1.25 pM. Moreover, the biosensor shows great stability under different pH and various anion conditions. The proposed sensor was utilized for environmental water sample detection, demonstrating the dependability of the detection system. Considering the high sensitivity and reliable performance of the assay, it could be further used in environmental monitoring. In addition, the design strategy reported in this study could extend the application of CRISPR/Cas12a in heavy metal detection.

chemistry, analytical
Computational Design of Nucleic Acid-Based Bioreceptor for Contaminants of Emerging Concern

Patrizio Arrigo,Debora Baroni

DOI: https://doi.org/10.1007/978-981-15-0671-0_12

2019-10-12

Abstract:Human activities have increased the variety chemical pollutants spread in air, water and soil. Every day new compounds potentially harmful or dangerous could contribute to increase the level of environmental pollution. These substances are known as Contaminant of Emerging Concern (CEC) because they have not previously detected or their toxicity is not yet clearly established. The capability to screen, almost prioritized CEC, requires new sensitive and rapid techniques capable to create an efficient monitoring network. In addition to traditional analytical a new class of monitoring systems is emerged: the biosensors. Their foremost characteristics is the use of a biological or biologically inspired receptor element, the bioreceptor, combined to a system capable to generate a physico-chemical signal. The sensor element, e.g. tissue, microorganisms, cell receptor, enzymes antibodies and nucleic acids, is biologically derived or inspire material. The detector transducer is the module which capture and transform the biological signal in a chemical-physics way: optical, piezoelectric, electro-chemical, electro-chemiluminescence etc., which can be easily measured and quantified. Nucleic acid-based technologies have been recently emerged as alternative to protein for bio-receptor design. The aim of this chapter is to offer, from a computational perspective, a framework of tools and challenge related to the selection of the most suitable bio-receptors to screen particular CEC chemicals: the pharmaceutical and personal care products (PCPPs).
Enhancing high-efficient cadmium biosorption of Escherichia coli via cell surface displaying metallothionien CUP1

Nan He,Ziru Wang,Ling Lei,Changxuan Chen,Yixian Qin,Jingxiang Tang,Kecheng Dai,Heng Xu

DOI: https://doi.org/10.1080/09593330.2024.2375006

IF: 3.475

2024-07-18

Environmental Technology

Abstract:Cadmium (Cd) is one of the common heavy metal pollutants in soil, which can induce various diseases and pose a serious threat to human health. Metallothioneins (MTs) are well-known for their excellent metal binding ability due to a high content of cysteine, which has great potential for heavy metal chelation. In this study, we used the Escherichia coli ( E. coli ) surface display system LPP-OmpA to construct a recombinant plasmid pBSD-LCF encoding LPP-OmpA-CUP1-Flag fusion protein. Then we displayed the metallothionein CUP1 from Saccharomyces cerevisiae on E. coli DH5α surface for Cd removing. The feasibility of surface display of metallothionein CUP1 in recombinant E. coli DH5α (pBSD-LCF) by Lpp-OmpA system was proved by flow cytometry and western blot analysis, and the specificity of the fusion protein in the recombinant strain was also verified. The results showed that the Cd 2+ resistance capacity of DH5α (pBSD-LCF) was highly enhanced by about 200%. Fourier-transform infrared spectroscopy showed that sulfhydryl and sulfonyl groups were involved in Cd 2+ binding to cell surface of DH5α (pBSD-LCF). Meanwhile, Cd removal rate by DH5α (pBSD-LCF) was promoted to 95.2%. Thus, the recombinant strain E. coli DH5α (pBSD-LCF) can effectively chelate environmental metals, and the cell surface expression of metallothionein on E. coli can provide new ideas and directions for heavy metals remediation.

environmental sciences
Simple whole-cell biodetection and bioremediation of heavy metals based on an engineered lead-specific operon.

Wei Wei,Xiangzhi Liu,Peiqing Sun,Xin Wang,Hong Zhu,Mei Hong,Zong-Wan Mao,Jing Zhao

DOI: https://doi.org/10.1021/es4046567

IF: 11.4

2014-01-01

Environmental Science & Technology

Abstract:A lead-specific binding protein, PbrR, and promoter pbr from the lead resistance operon, pbr, of Cupriavidus metallidurans CH34 was incorporated into E. coli in conjunction with an engineered downstream RFP (red fluorescence protein), which allowed for highly sensitive and selective whole-cell detection of lead ions. The subsequent display of PbrR on the E. coli cell surface permitted selective adsorption of lead ions from solution containing various heavy metal ions. The surface-engineered E. coli bacteria effectively protected Arabidopsis thaliana seed germination from the toxicity of lead ions at high concentrations. Engineering the E. coli bacteria harboring these lead-specific elements from the pbr operon may potentially be a valuable general strategy for biodetection and bioremediation of toxic heavy metal ions in the environment.
A turn-on signal biosensor for cadmium(II) based on DNAzyme and stem-loop qPCR

Jiale Li,Zaihui Du,Pengfei Wang,Keren Chen,Shenghao Lin,Wentao Xu,Longjiao Zhu

DOI: https://doi.org/10.1016/j.aca.2023.341827

IF: 6.911

2023-09-21

Analytica Chimica Acta

Abstract:Cadmium is a heavy metal that is exceedingly hazardous to humans and can enter the body through tainted food or drink, causing severe harm. It is critical to develop a technology for detecting cadmium in food and water that is sensitive and accurate. One such approach, which employs nucleases , is uncommon. A cadmium(II) turn-on biosensor was successfully created in this work using repetitive cleavage of certain specific nucleases for signal conversion and sophisticated stem-loop qPCR (quantitative polymerase chain reaction) for quick signal amplification and output. The method has strong selectivity and sensitivity for precise quantification, with a detection limit of 6 nmol L −1 , i.e. 0.948 g L −1 , which is far lower than the 5.0 g L −1 set by the United States Environmental Protection Agency, and it also operates well in retail rice samples.

chemistry, analytical
Differential Detection of Bioavailable Mercury and Cadmium Based on a Robust Dual-Sensing Bacterial Biosensor

Chang-ye Hui,Yan Guo,Han Li,Yu-ting Chen,Juan Yi

DOI: https://doi.org/10.3389/fmicb.2022.846524

IF: 5.2

2022-04-13

Frontiers in Microbiology

Abstract:Genetically programmed biosensors have been widely used to monitor bioavailable heavy metal pollutions in terms of their toxicity to living organisms. Most bacterial biosensors were initially designed to detect specific heavy metals such as mercury and cadmium. However, most available biosensors failed to distinguish cadmium from various heavy metals, especially mercury. Integrating diverse sensing elements into a single genetic construct or a single host strain has been demonstrated to quantify several heavy metals simultaneously. In this study, a dual-sensing construct was assembled by employing mercury-responsive regulator (MerR) and cadmium-responsive regulator (CadR) as the separate sensory elements and enhanced fluorescent protein (eGFP) and mCherry red fluorescent protein (mCherry) as the separate reporters. Compared with two corresponding single-sensing bacterial sensors, the dual-sensing bacterial sensor emitted differential double-color fluorescence upon exposure to 0–40 μM toxic Hg(II) and red fluorescence upon exposure to toxic Cd(II) below 200 μM. Bioavailable Hg(II) could be quantitatively determined using double-color fluorescence within a narrow concentration range (0–5 μM). But bioavailable Cd(II) could be quantitatively measured using red fluorescence over a wide concentration range (0–200 μM). The dual-sensing biosensor was applied to detect bioavailable Hg(II) and Cd(II) simultaneously. Significant higher red fluorescence reflected the predominant pollution of Cd(II), and significant higher green fluorescence suggested the predominant pollution of Hg(II). Our findings show that the synergistic application of various sensory modules contributes to an efficient biological device that responds to concurrent heavy metal pollutants in the environment.

microbiology
Discovery of a New Chemoeffector for Escherichia Coli Chemoreceptor Tsr and Identification of a Molecular Mechanism of Repellent Sensing

Xi Chen,Shuangyu Bi,Xiaomin Ma,Victor Sourjik,Luhua Lai

DOI: https://doi.org/10.1021/acsbiomedchemau.1c00055

2022-01-01

ACS Bio & Med Chem Au

Abstract:Motile bacteria use chemotaxis to search for nutrients and escape from harmful chemicals. While the sensing mechanisms for chemical attractants are well established, the molecular details of chemorepellent detection are poorly understood. Here, by using combined computational and experimental approaches to screen potential chemoeffectors for the Escherichia coli chemoreceptor Tsr, we identified a specific chemorepellent, 1-aminocyclohexanecarboxylic acid (ACHC). Our study strongly suggests that ACHC directly binds to the periplasmic sensory domain of Tsr and competes with l-serine, the amino acid attractant of Tsr. We further characterized the binding features of l-serine, ACHC, and l-leucine (a natural repellent that binds Tsr) and found that Asn68 plays a key role in mediating chemotactic response. Mutating Asn68 to Ala inverted the response to l-leucine from a repellent to an attractant. Our study provides important insights into the molecular mechanisms of ligand sensing via bacterial chemoreceptors.
Engineering whole-cell microbial biosensors: Design principles and applications in monitoring and treatment of heavy metals and organic pollutants

Changjiang Liu,Huan Yu,Baocai Zhang,Shilin Liu,Chen-guang Liu,Feng Li,Hao Song

DOI: https://doi.org/10.1016/j.biotechadv.2022.108019

IF: 17.681

2022-11-01

Biotechnology Advances

Abstract:Biosensors have been widely used as cost-effective, rapid, in situ, and real-time analytical tools for monitoring environments. The development of synthetic biology has enabled emergence of genetically engineered whole-cell microbial biosensors. This review updates the design and optimization principles for a diverse array of whole-cell biosensors based on transcription factors (TF) including activators or repressors derived from heavy metal resistance systems, alkanes, and aromatics metabolic pathways of bacteria. By designing genetic circuits, the whole-cell biosensors could be engineered to intelligently sense heavy metals (Hg2+, Zn2+, Pb2+, Au3+, Cd2+, As3+, Ni2+, Cu2+, and UO22+) or organic compounds (alcohols, alkanes, phenols, and benzenes) through one-component or two-component system-based TFs, transduce signals through genetic amplifiers, and response as various outputs such as cell fluorescence and bioelectricity for monitoring heavy metals and organic pollutants in real conditions, synthetic curli and surface metal-binding peptides for in situ bio-sorption of heavy metals. We further review strategies that have been implemented to optimize the selectivity and correlation between ligand concentration and output signal of the TF-based biosensors, so as to meet requirements of practical applications. The optimization strategies include protein engineering to change specificities, promoter engineering to improve sensitivities, and genetic circuit-based amplification to enhance dynamic ranges via designing transcriptional amplifiers, logic gates, and feedback loops. At last, we outlook future trends in developing novel forms of biosensors.

biotechnology & applied microbiology
Ultra-sensitive water contaminant detection with transcription factor interfaced microcantilevers

Dilip K. Agarwal,Tyler J. Lucci,Jaeyoung K. Jung,Gajendra S. Shekhawat,Julius B. Lucks,Vinayak P. Dravid

DOI: https://doi.org/10.1101/2024.02.01.578376

2024-02-15

Abstract:Water contamination is a growing global concern, creating a need to develop technologies that can detect a range of target compounds at the required thresholds. Here, we address this need by merging biological allosteric transcription factors with DNA coated nanomechanical microcantilevers to detect chemicals in water with digital readout. After proof-of-concept demonstration and optimization to detect tetracycline with the TetR transcription factor, we use the CadC transcription factor to detect Pb and Cd in water at concentrations down to 2 ppb and 1 ppb, respectively, in less than fifteen minutes. A computational model suggests this improvement in sensitivity could be achieved by the DNA coated microcantilever surface changing transcription factor binding properties. Our findings demonstrate a promising new approach for water quality monitoring with fast, highly sensitive, digital readouts.

Synthetic Biology
Enhancing cadmium biosorption capacity in E. coli through heterologous expression of metal-chelating proteins: Insights into bioremediation potential and mechanisms

Chen Wu,Yu-jun Wu,Sheng-wei Yi,Feng Li

DOI: https://doi.org/10.1007/s11771-024-5625-4

2024-06-14

Journal of Central South University

Abstract:Cadmium (Cd) is a biologically non-essential and toxic heavy metal that enters the environment through natural emissions or anthropogenic activities, posing threats to human health. The efficient expression of metal-chelating proteins (MCP) in microorganisms can enhance microbial remediation of Cd. In this study, a heterologous expression system (GEM01) of MCP encoded by the mcp gene in E. coli was constructed, and the adsorption effect and potential mechanism on Cd were explored. The results indicated that Cd 2+ significantly enhanced the abundance of mcp gene in GEM01, thus increasing the Cd 2+ biosorption capacity (8.09 mg/g, 2.32 times higher than the control). The retention of Cd 2+ during the autolysis of GEM01 was 87.87%. Fluorescence spectroscopy and molecular dynamics simulations demonstrated that there was a strong interaction between Cd 2+ and MCP. FT-IR demonstrated that some functional groups (e.g., carboxyl group and methyl group) in MCP were involved in the interaction between MCP and Cd 2+ . Molecular docking further demonstrated that polar and hydrophilic residues (e.g., aspartic acid, glutamic acid, serine, and histidine) on the surface of MCP bound to Cd 2+ via electrostatic attraction. These findings offer new insights into Cd 2+ bioremediation by MCP and genetic resources for microbial remediation of heavy metal pollution.

metallurgy & metallurgical engineering
Engineered Cyanobacteria-Based Living Materials for Bioremediation of Heavy Metals Both In Vitro and In Vivo

Tao Sun,Huaishu Huo,Yingying Zhang,Yaru Xie,Yize Li,Kungang Pan,Fenfang Zhang,Jing Liu,Yindong Tong,Weiwen Zhang,Lei Chen

DOI: https://doi.org/10.1021/acsnano.4c02493

IF: 17.1

2024-07-09

ACS Nano

Abstract:The pollution caused by heavy metals (HMs) represents a global concern due to their serious environmental threat. Photosynthetic cyanobacteria have a natural niche and the ability to remediate HMs such as cadmium. However, their practical application is hindered by a low tolerance to HMs and issues related to recycling. In response to these challenges, this study focuses on the development and evaluation of engineered cyanobacteria-based living materials for HMs bioremediation. Genes encoding phytochelatins (PCSs) and metallothioneins (MTs) were introduced into the model cyanobacterium Synechocystis sp. PCC 6803, creating PM/6803. The strain exhibited improved tolerance to multiple HMs and effectively removed a combination of Cd2+, Zn2+, and Cu2+. Using Cd2+ as a representative, PM/6803 achieved a bioremediation rate of approximately 21 μg of Cd2+/OD750 under the given test conditions. To facilitate its controllable application, PM/6803 was encapsulated using sodium alginate-based hydrogels (PM/6803@SA) to create "living materials" with different shapes. This system was feasible, biocompatible, and effective for removing Cd2+ under simulated conditions of zebrafish and mice models. Briefly, in vitro application of PM/6803@SA efficiently rescued zebrafish from polluted water containing Cd2+, while in vivo use of PM/6803@SA significantly decreased the Cd2+ content in mice bodies and restored their active behavior. The study offers feasible strategies for HMs bioremediation using the interesting biomaterials of engineered cyanobacteria both in vitro and in vivo.

Tailoring Escherichia Coli Chemotactic Sensing Towards Cadmium by Computational Redesign of Ribose-Binding Protein

New progress in coumarin-based fluorescence sensor for metal ions

Optimizing Cadmium and Mercury Specificity of CadR-based E. Coli Biosensors by Redesign of CadR

Signal Enhancement of Electrochemical DNA Biosensors for the Detection of Trace Heavy Metals

Development of CadR-based cadmium whole cell biosensor for visual detection of environmental Cd2

Detection of Bioavailable Cadmium by Double-Color Fluorescence Based on a Dual-Sensing Bioreporter System

A tailored indigoidine-based whole-cell biosensor for detecting toxic cadmium in environmental water samples

Selective cadmium regulation mediated by a cooperative binding mechanism in CadR.

Integrating CRISPR/Cas12a with strand displacement amplification for the ultrasensitive aptasensing of cadmium(II)

Discovery Of Novel Chemoeffectors And Rational Design Of Escherichia Coli Chemoreceptor Specificity

An ultrasensitive Cd 2+ detection biosensor based on DNAzyme and CRISPR/Cas12a coupled with hybridization chain reaction

Computational Design of Nucleic Acid-Based Bioreceptor for Contaminants of Emerging Concern

Enhancing high-efficient cadmium biosorption of Escherichia coli via cell surface displaying metallothionien CUP1

Simple whole-cell biodetection and bioremediation of heavy metals based on an engineered lead-specific operon.

A turn-on signal biosensor for cadmium(II) based on DNAzyme and stem-loop qPCR

Differential Detection of Bioavailable Mercury and Cadmium Based on a Robust Dual-Sensing Bacterial Biosensor

Discovery of a New Chemoeffector for Escherichia Coli Chemoreceptor Tsr and Identification of a Molecular Mechanism of Repellent Sensing

Engineering whole-cell microbial biosensors: Design principles and applications in monitoring and treatment of heavy metals and organic pollutants

Ultra-sensitive water contaminant detection with transcription factor interfaced microcantilevers

Enhancing cadmium biosorption capacity in E. coli through heterologous expression of metal-chelating proteins: Insights into bioremediation potential and mechanisms

Engineered Cyanobacteria-Based Living Materials for Bioremediation of Heavy Metals Both In Vitro and In Vivo