Abstract:This study presents a computational fluid dynamics (CFD) based approach to determine the optimal positioning for an atmospheric turbulence sensor on a rotary-wing uncrewed aerial vehicle (UAV) with X8 configuration. The vertical (zBF) and horizontal (xBF) distances of the sensor to the UAV center to reduce the effect of the propeller-induced flow are investigated by CFD simulations based on the k−ε turbulence model and the actuator disc theory. To ensure a realistic geometric design of the simulations, the tilt angles of a test UAV in flight were measured by flying the drone along a fixed pattern at different constant ground speeds. Based on those measurement results, a corresponding geometry domain was generated for the CFD simulations. Specific emphasis was given to the mesh construction followed by a sensitivity study on the mesh resolution to find a compromise between acceptable simulation accuracy and available computational resources. The final CFD simulations (twelve in total) were performed for four inflow conditions (2.5 m s−1, 5 m s−1, 7.5 m s−1 and 10 m s−1) and three payload configurations (15 kg, 20 kg and 25 kg) of the UAV. The results depend on the inflows and show that the most efficient way to reduce the influence of the propeller-induced flow is mounting the sensor upwind, pointing along the incoming flow direction at xBF varying between 0.46 and 1.66 D, and under the mean plane of the rotors at zBF between 0.01 and 0.7 D. Finally, results are then applied to the possible real-case scenario of a Foxtech D130 carrying a CSAT3B ultrasonic anemometer, that aims to sample wind with mean flows higher than 5 m s−1. The authors propose xBF=1.7 m and zBF=20 cm below the mean rotor plane as a feasible compromise between propeller-induced flow reduction and safety. These results will be used to improve the design of a novel drone-based atmospheric turbulence measurement system, which aims to combine accurate wind and turbulence measurements by a research-grade ultrasonic anemometer with the high mobility and flexibility of UAVs as sensor carriers.

Extraction of a Weak Flow Field for a Multi-Rotor Unmanned Aerial Vehicle (UAV) Using High-Speed Background-Oriented Schlieren (BOS) Technology.

A New Data Assimilation Method of Recovering Turbulent Mean Flow Field at High Reynolds Numbers

Experimental Study to Quantify the Rotor-to-Rotor Interaction Characteristics of a Small Unmanned-Aerial-Vehicle

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

APPLICATION OF ULTRASONIC ANEMOMETER ARRAY TO FIELD MEASUREMENTS OF THE DOWNWASH FLOW OF AN AGRICULTURAL UNMANNED HELICOPTER

High-accuracy, high-resolution downwash flow field measurements of an unmanned helicopter for precision agriculture

A Method of Flow Field Reconstruction via Proper Orthogonal Decomposition

Fusing Stereopsis & Corner Sparse Optical Flow for Real-time Obstacle Avoidance of Unmanned Aerial Vehicle

The Computational Fluid Dynamic Modeling of Downwash Flow Field for a Six-Rotor UAV

Three Dimension Flow Field Numerical Simulation for Airscrew Unmanned Aircraft Vehicle

Machine-learned flow estimation with sparse data -- exemplified for the rooftop of a UAV vertiport

Fast and accurate flow measurement through dual-camera light field particle image velocimetry and ordered-subset algorithm

Flow Structure around a Multicopter Drone: A Computational Fluid Dynamics Analysis for Sensor Placement Considerations

Extracting Micro-Doppler Features from Multi-Rotor Unmanned Aerial Vehicles Using Time-Frequency Rotation Domain Concentration

Experimental Investigation of the Flow Structure over a Delta Wing Via Flow Visualization Methods

Unmanned Aerial Vehicle Position Estimation Augmentation Using Optical Flow Sensor

Numerical Simulation Of Mechanical Performances And Outflow Field For A Rotor Uav

Real-time visualization and analysis of airflow field by use of digital holography

Data-Driven Method for Flow Sensing of Aerodynamic Parameters Using Distributed Pressure Measurements

Research on Wind Field Visualization Based on UAV Wind Measurement Method

Robotics meets Fluid Dynamics: A Characterization of the Induced Airflow below a Quadrotor as a Turbulent Jet