Abstract:Chlorine (Cl)-containing chemicals, including hydrogen chloride, generated during thermal degradation of polyvinyl chloride (PVC) and corresponding mixture impede the chemical recycling of PVC-containing plastic wastes. While upgrading plastic-derived vapors, the presence of Cl-containing chemicals may deactivate the catalysts. Accordingly, herein, catalytic upgrading of pyrolysis vapor prepared from a mixture of PVC and polyolefins is performed using a fixed-bed reactor comprising zeolites. Among the H-forms of zeolites (namely, ZSM-5, Y, β, and chabazite) used in this study, a higher yield of gas products composed of hydrocarbons with lower carbon numbers is obtained using H-ZSM-5, thus indicating further decomposition of the pyrolysis vapor to C1-C4 hydrocarbons on it. Although the formation of aromatic compounds is better on H-ZSM-5, product distributions can be adjusted by further modifying the acidic properties via the alteration of the Si/Al molar ratio, and maximum yields of C1-C4 compounds (60.8%) and olefins (64.7%) are achieved using a Si/Al molar ratio of 50. Additionally, metal ion exchange on H-ZSM-5 is conducted, and upgrading of PVC-containing waste-derived vapor to aromatic chemicals and small hydrocarbon molecules was successfully performed using Co-substituted H-ZSM-5. It reveals that the highest yield of gas products on 1.74 wt% cobalt (Co)-substituted H-ZSM-5 is acquired via the selection of an appropriate metal and metal ion concentration adjustment. Nevertheless, introduction of excess Co into the H-ZSM-5 surface decreases the cracking activity, thereby implying that highly distributed Co is required to achieve excellent cracking activity. The addition of Co also adjusted the acid types of H-ZSM-5, and more Lewis acid sites compared to Brønsted acid sites selectively produced olefins and naphthenes over paraffins and aromatics. The proposed approach can be a feasible process to produce valuable petroleum-replacing chemicals from Cl-containing mixed plastic wastes, contributing to the closed loops for upcycling plastic wastes.

Upcycling waste polyvinyl chloride: One-pot synthesis of valuable carbon materials and pipeline-quality syngas via pyrolysis in a closed reactor.

Waste PVC Upcycling: Transferring Unmanageable Cl Species into Value-Added Cl-containing Chemicals

Chemical upcycling of PVC-containing plastic wastes by thermal degradation and catalysis in a chlorine-rich environment

Upgrading Polyvinyl Chloride by ZnO-Assisted Solvothermal Dehalogenation

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path

Sequential hydrothermal dechlorination and liquefaction of PVC

Pyrolysis of Polyvinyl Chloride (PVC)-Containing Mixed Plastic Wastes for Recovery of Hydrocarbons

Dehydrochlorination of polyvinyl chloride in green solvent

Catalytic Process Toward Green Recycling of Polyvinyl Chloride: A Study on Thermodynamic, Kinetic and Pyrolysis Characteristics

Preparation of carbon nanotubes by catalytic pyrolysis of dechlorinated PVC

Catalytic stepwise pyrolysis for dechlorination and chemical recycling of PVC-containing mixed plastic wastes: Influence of temperature, heating rate, and catalyst

Polyvinyl Chloride (PVC) Derived Microporous Carbons Prepared Via Hydrothermal Dechlorination and Potassium Hydroxide Activation for Efficient CO2 Capture

Hydrothermal treatment of polyvinyl chloride: Reactors, dechlorination chemistry, application, and challenges

Coupling dechlorination and catalytic pyrolysis to produce carbon nanotubes from mixed polyvinyl chloride and polyethylene

Catalytic conversion of waste plastics: focus on waste PVC

Polyvinyl chloride (PVC) derived microporous carbons prepared via hydrothermal dechlorination and potassium hydroxide activation for efficient CO 2 capture

Insight into Dechlorination of Pyrolysis Oil During Fast Co-Pyrolysis of High-Alkali Coal and Polyvinyl Chloride (PVC)

Photothermal Upcycling of Waste Polyvinyl Chloride Plastics

Characterization of solid and liquid carbonization products of polyvinyl chloride (PVC) and investigation of the PVC-derived adsorbent for the removal of organic compounds from water

Waste Polyvinylchloride Derived Pitch As a Precursor to Develop Carbon Fibers and Activated Carbon Fibers

A new approach to transforming PVC waste into energy via combined hydrothermal carbonization and fast pyrolysis