Abstract:For robotic polishing of curved surfaces with compliant polishing disc, it is critical to accurately control the tilt angle of the polishing disc and normal contact force between the disc and the workpiece surface simultaneously. As conventional industrial robots lack force control capability, a 3-DOF two-rotational-one-translational (2R1T) force-controlled end-effector based on the 3-PPS parallel mechanism is developed for robotic polishing. During the polishing process, the changes of the tilt angle of the end-effector's moving platform will result in displacement variations of the contact point, owing to the inherent parasitic motion of the end-effector module, the geometry of the disc, and the compliance of the disc. Without proper compensation of the displacement variation, the control accuracy of contact force will be significantly decreased. To tackle this problem, a parametric model is established to predict the contact point variation. A hybrid orientation/force control architecture with compensation of the contact point variation is proposed. Based on the kinematic analysis, orientation control is achieved through a position controller. The force tracking control considering the uncertainty of the environment is achieved through an admittance controller. By introducing the contact point compensation model into the control architecture, the control accuracy of the contact force is significantly improved. The proposed control architecture is evaluated on a macro-mini manipulator consisting of a 6-DOF industrial robot and the 2R1T force-controlled end-effector. The experimental results indicate that the orientation control is accurate and the mean force errors with three different kinds of tilt angle references are reduced by 78.9 , 81.1 and 72.3 compared to the conventional hybrid orientation/force control, respectively, which validate the effectiveness of the proposed control method.

Real-time normal contact force control for robotic surface processing of workpieces without a priori geometric model

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Research and application on force control of industrial robot polishing concave curved surfaces

Contact Force Detection and Control for Robotic Polishing Based on Joint Torque Sensors

PD-adaptive variable impedance constant force control of macro-mini robot for compliant grinding and polishing

A hybrid control strategy for grinding and polishing robot based on adaptive impedance control

Precise and smooth contact force control for a hybrid mobile robot used in polishing

The constant force control based on an optimized environmental model for the robotic lapping of curved surface

A Force Control Method Integrating Human Skills for Complex Surface Finishing

Hybrid orientation/force control for robotic polishing with a 2R1T force-controlled end-effector

Proxy-Based Sliding Mode Force Control for Compliant Grinding via Diagonal Recurrent Neural Network and Prandtl-Ishlinskii Hysteresis Compensation Model

Path Planning under Force Control in Robotic Polishing of the Complex Curved Surfaces

Research on Surface Tracking and Constant Force Control of a Grinding Robot

An adaptive impedance control method for blade polishing based on the Kalman filter

Real-Time Deformable-Contact-Aware Model Predictive Control for Force-Modulated Manipulation

Development of a Force Controlled Nanocutting System Using a Flexible Mechanism for Adaptive Cutting of Microstructures on Non-Planar Surfaces

An improved rational Bezier model for pneumatic constant force control device of robotic polishing with hysteretic nonlinearity

Piecewise approximation and local differential compensation of contact stress distribution of workpiece surface in robotic belt grinding

Control of tool/workpiece contact force with application to robotic deburring

Research on the algorithm of constant force grinding controller based on reinforcement learning PPO

Estimation and compensation of angular misalignment at robot end brush roller-workpiece contact interface via elastic contact force perception