Abstract:Abstract Building shape affects wind pressure on building surfaces, while limited studies have examined how building shape affects the wind pressure on cruciform-shaped tall buildings. This article investigated the variation of the average wind pressure coefficient (AWPC) on cruciform-shaped tall buildings with the height–width ratio (HWR) and height–thickness ratio (HTR). The results demonstrated the occurrence of building blockage, wind separation, wind re-circulation, and wind re-attachment on building surfaces. The frontal surface of the main building was always the windward surface with positive wind pressure. At 2/3 of the building height (H), the peak AWPCs in all scenarios were ~0.70. However, in the case with an HWR of 3.66, the side surfaces of the main building and the frontal surfaces of the branch building, wind pressure was all negative. With the HWR reduction by building width increase, wind pressure on these surfaces became positive, where the AWPCs in the HWR = 1.41 case were 0.60–0.63 and 0.64–0.69 on side and frontal surface, respectively. With the HWR decrease, both positive and negative wind pressure intensified. Along the central axis (M1) in the vertical direction, wider buildings had stronger positive wind pressure on the frontal surfaces below 0.10H, while narrower buildings had stronger positive wind pressure above 0.82H. In comparison, HTR made limited differences to the wind pressure on the frontal surface. Overall, vertical results showed that scenarios with smaller HWR underwent stronger positive and negative wind pressures. On the HTR cases, wind pressure on top surfaces showed complicated results, while thicker buildings had weaker negative wind pressure on the back surface. Overall, this study is important to understand the characteristics of wind load on cruciform-shaped tall buildings and generate implications for wind resistance, natural ventilation design, and wind electricity generation over tall buildings.

Effects of length-width ratio on extreme wind pressure of rectangular-sectioned tall buildings

Effects of plan dimensions on gust wind loads for high-rise buildings

Numerical Research of Layout Effect on Wind Environment Around High-Rise Buildings

Numerical study of wind loads on low-rise gable-roofed building roofs——Analysis of roof pitch and height-width ratio effects

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Numerical study on interference effects of wind loads about a cluster of tall buildings

Non-Gaussian feature of fluctuating wind pressures on rectangular high-rise buildings with different side ratios

Numerical Study of the Effect of Wall Opening on Wind Pressures on Low-Rise Gable-Roofed Buildings

Wind Tunnel Experimental Study of Wind Pressure Distribution on Tall Buildings Considering Surrounding Interference

Numerical Study of Plan Arrangement Effect on Wind Environment Around Tall Buildings

NUMERICAL STUDY ON THE EFFECTS OF CURVED ANNEX ON THE WIND LOADS ON A SPHERICAL TALL BUILDING

Field Measurement of Wind Pressure on a Large-Scale Spatial Structure and Comparison with Wind Tunnel Test Results

Numerical and Experimental Study on Flow Field around Slab-Type High-Rise Residential Buildings

Effects of Vertical Rib Arrangements on the Wind Pressure and Aerodynamic Force of a High-Rise Building

Three‐dimensional Wind Load Effects and Wind‐induced Dynamic Responses of a Tall Building with X‐shape

Average surface wind pressure surrounding tall buildings with cruciform shapes

Effects of corner modifications on wind loads and local pressures on walls of tall buildings

Effects of Attached Afterbody Shapes on Wind Forces on Rectangular Tall Buildings

Impact of a single high-rise building on the wind pressure acting on the surrounding low-rise buildings

Experimental Analysis of Wind Pressure Characteristics in a Reduced-Scale Model of a Slab-Shaped High-Rise Building at Different Inflow Conditions with Various Wind Flow Directions

Wind pressures acting on low-rise buildings