Robotic Denudation of Zygotes.
Rongan Zhai,Guanqiao Shan,Changsheng Dai,Miao Hao,Yong Wang,Na Liu,Changhai Ru,Yu Sun
DOI: https://doi.org/10.1080/01691864.2023.2252098
IF: 2.057
2023-01-01
Advanced Robotics
Abstract:The vitrification technology is used in the embryo freezing process. To ensure intracellular water removal and avoid ice crystal formation, the cumulus cells surrounding zygotes need to be removed. As operators have varying skill and long-time fatigue, it is challenging to completely remove the cumulus cells surrounding zygotes and reduce zygote loss inside the micropipette. The objective of this work is to develop a robotic zygote denudation system for the vitrification procedure. The robotic system enables accurate segmentation of cumulus cells for estimating the mass of cumulus zygote complexes (CZCs) inside the micropipette via the Res-Unet neural network. A mathematical model was built to describe the dynamic motion of CZCs inside the micropipette, and a model-based optimal controller was developed to aspirate and deposit CZCs inside the micropipette. To denude zygote completely, the Res-Attention neural network was used to detect cumulus cells for predicting the quality of zygote denudation. In the mouse zygotes experiments, the yield rate is 98.2% ± 1.6% and the denudation efficacy is 96.9% ± 0.2% for the robotic system. Compared with manual denudation, the survival rate and development rate of embryos cultured from zygotes denuded by the robotic system were both higher in subsequent vitrification procedure.KEYWORDS: Zygote denudationvitrificationrobotic systemneural network AcknowledgementsRongan Zhai proposed the conception of the research, did the experiment, wrote the original manuscript; Guanqiao Shan and Changsheng Dai made the research administration; Miao Hao made investigation on the research; Yong Wang and Na Liu analysed the research data; Changhai Ru provided funds for the research; Yu Sun supervised the research, and reviewed and edited the manuscript.Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThis work was supported by China Scholarship Fund [grant numbers 202006890057] and National Natural Science Foundation of China [grant numbers 61933008, 62273247].Notes on contributorsRongan ZhaiRongan Zhai received the master’s degree in mechanical engineering from Soochow University, Suzhou, China, in 2017. He is currently pursuing the Ph.D. degree with the Mechanical and Automation Engineering Department, Shanghai University, Shanghai, China. His research interests include robotic cell manipulation and computer vision.Guanqiao ShanGuanqiao Shan received the B.E. degree in Electronic Information Engineering and the M.S. degree in Physics from Beihang University, Beijing, China, in 2014 and 2017, respectively. He is currently a Postdoctoral Fellow with the Advanced Micro and Nanosystems Laboratory, University of Toronto, Toronto, ON, Canada. His research interests include robotic cell manipulation and characterization.Changsheng DaiChangsheng Dai received the B.E. and M.E. degrees from the Harbin Institute of Technology, Harbin, China, in 2014 and 2016, respectively, and the Ph.D. degree from the University of Toronto, Toronto, ON, Canada, in 2020, all in mechanical engineering. He is currently a Professor with the School of Mechanical Engineering, Dalian University of Technology, Dalian, China. His research interests include robotic cell manipulation and medical robotics.Miao HaoMiao Hao received the master’s degree in mechanical and electrical engineering from Nanjing Forestry University, Nanjing, China, in 2019. She is currently pursuing the Ph.D. degree with School of Mechanical and Electrical Engineering, Soochow University, Suzhou, China. Her research interests include robotic cell manipulation and computer vision.Yong WangYong Wang received the master’s degree in mechanical engineering from Soochow University, Suzhou, China, in 2014. He is currently a Lecturer with the School of Electronic and Information Engineering, Suzhou University of Science and Technology, Suzhou, China. His research interests include design and fabrication of micro-nano electromechanical systems and cross-scale nanopositioning technology.Na LiuNa Liu received the B.S. degree in automation from Sichuan University, Chengdu, China, in 2010, and the Ph.D. degree from the State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, China, in 2016. She is currently an Associated Professor with the School of Mechatronic Engineering and Automation, Shanghai University, Shanghai, China. Her research interests include micro- and nano-robotics, and their applications in bioengineering and biomedicine.Changhai RuChanghai Ru received the Ph.D. degree in Mechatronics Engineering from the Harbin Institute of Technology, Harbin, China, in 2005. He was a Postdoctoral Fellow with the Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, ON, Canada. He is currently a Professor with the School of Electronic and Information Engineering, Suzhou University of Science and Technology, Suzhou, China, and a Director of the JITRI Micro-Nano Automation System and Equipment Technology Research Institute. His research interests include microrobotics and nanorobotic manipulation, nanopositioning technology, and automated instrumentation for biomedical applications.Yu SunYu Sun received the B.S. degree in Electrical Engineering from the Dalian University of Technology, Dalian, China, in 1996, the M.S. degree in Control Science and Engineering from Institute of Automation, Chinese Academy of Sciences, Beijing, China, in 1999, and the M.S. degree in Electrical Engineering and the Ph.D. degree in Mechanical Engineering from the University of Minnesota, Minneapolis, MN, USA, in 2001 and 2003, respectively. He is currently a Professor with the University of Toronto, Toronto, ON, Canada. He is a Tier I Canada Research Chair and Director of the Robotics Institute. His laboratory specializes in developing innovative technologies and instruments for manipulating and characterizing cells, molecules, and nanomaterials. He was elected as Fellow of the American Society of Mechanical Engineers, the American Association for the Advancement of Science, the National Academy of Inventors, the Canadian Academy of Engineering, and the Royal Society of Canada for his work on micro-nano devices and robotic systems.